21
DOWNLOAD FIRMWARE INSTALLING FIRMWARE
1. Go to www.clintdigital.com and
download the newest rmware available
for FREYA.
2. When download is complete
copy and paste FREYA.fw from your
download folder over to an empty USB
memory stick.
3. While the le is being copied,
power on FREYA by pressing the
PLAY/PAUSE button.
4. When FREYA is fully booted up
(usually after 15-20 secs.), insert the
USB stick into the USB port on FREYA.
Note: Make sure FREYA is connected to
a power outlet so the speaker does not
power down in the middle of the update.
5. Press and hold the “Volume +” and
“Mute” simultaneously for 4 secs.
6. Release buttons and wait. Watch
the LED’s carefully and do not turn off
power or disconnect USB memory stick
during update process.
7. All ve LED will blink every second
indicating update process is ongoing.
8. When the update is nished FREYA
will reboot (the four white LED’s will
ash rapidly).
Hold for 4 sec.
Insert USB memory
stick here.
All LEDs will ash
This quick guide explains how to upgrade the
rmware (software) of your FREYA speaker
This quick guide explains how to upgrade the
rmware (software) of your FREYA speaker
