Clint FREYA User manual

iOS CABLE CONNECT

1
CONNECT WITH iOS CABLE
1. Make sure your Wi-Fi is up and
running and within range of your iOS
device and FREYA speaker.
2. Turn on your speaker by pressing the
“PLAY/PAUSE” button.
Note: Make sure your iOS device runs
iOS 5 or later to use this connect feature.
How to connect your FREYA to your Wi-Fi
network using iOS Wi-Fi sharing feature
Press Power On

2
CONNECT WITH iOS CABLE
How to connect your FREYA to your Wi-Fi
network using iOS Wi-Fi sharing feature
3. When your speaker says “No device connected,
please reconnect your device” insert your USB
charging cable from your iOS device and to the back
of FREYA
4. Make sure your iOS device is open and on the
home screen - (Not locked).
5. Press the Wi-Fi setup button on the back of FREYA.
Insert USB here. Press here to connect

Quick Guide Rev. 1.0 for Clint FREYA - iOS CABLE CONNECT
We accept no liability for printing errors. Specications are
subject to change without notice - Clint Digital 2014.
CONNECT WITH iOS CABLE
6. On your iOS device choose “allow”
to share your Wi-Fi settings.
7. FREYA will reboot and connect to
your Wi-Fi network.
8. ENJOY!!
Note: If any help is necessary, please do
not hesitate to contact our team through
our website: www.clintdigital.com
3
Press Allow to connect
How to connect your FREYA to your Wi-Fi
network using iOS Wi-Fi sharing feature