21
DOWNLOAD FIRMWARE INSTALLING FIRMWARE
1. Go to www.clintdigital.com and
download the newest rmware available
for ODIN.
2. When download is complete
copy and paste ODIN.fw from your
download folder over to an empty USB
memory stick.
3. While the le is being copied,
power on ODIN by pressing the PLAY/
PAUSE button.
4. When ODIN is fully booted up
(usually after 15-20 secs.), insert the
USB stick into the USB port on ODIN.
5. Press and hold the “Volume +” and
“Mute” simultaneously for 4 secs.
6. Release buttons and wait. Watch
the LED’s carefully and do not turn off
power or disconnect USB memory stick
during update process.
7. All ve LED will blink every second
indicating update process is ongoing.
8. When the update is nished ODIN
will reboot (the four white LED’s will
ash rapidly).
Hold for 4 sec.
Insert USB memory
stick here.
All LEDs will ash
This quick guide explains how to upgrade the
rmware (software) of your ODIN speaker
This quick guide explains how to upgrade the
rmware (software) of your ODIN speaker
