CMS Freedom FR001 User manual

IMPORTANT SAFETY
FREEDOM FR001 & FR002
INSTRUCTION MANUAL
Version:210212

2
IMPORTANT SAFETY
INSTRUCTIONS
WARNING
This symbol indicates information
concerning your personal safety.
CAUTION
This symbol indicates information on how
to avoid damaging the unit.
IMPORTANT
This symbol indicats tips and information
about seting up FR002 (Charging Base).
CAUTION / WARNING
-Read all instructions before using the product.
-To reduce risk of injury, close supervision is necessary when the product is used near children.
-Use of an attachment not recommended or sold by power bank manufacture may result in a risk
of fire, electric shock, or injury to persons.
-To reduce risk of damage to the electric plug and cord, pull the plug rather than the cord when
disconnecting power pack.
-Do not operate the unit with a damaged cord or plug, or a damaged output cabled.
-Do not use if the unit has been damaged or modified. Damaged or modified batteries may exhibit
unpredictable behaviour resulting in fire, explosion or rick of injury.
-Do not disassemble the power bank, take it to a qualified service person when a service or repair
is required. Incorrect assembly may result in a risk of fire or electric shock.
-Do not exposed to water.
-This unit may become hot when recharging, handle with care.
-Do not leave in hot conditions 60C or above e.g., left sitting in hot car.
-Do not operate unit outside of specified conditions.
-This unit contains Li-ion 18650 or equivalent cells.
-Do not expose to heat or throw in fire.
-Do not attempt to modify.
-Be careful when unpackaging the unit. Do not use sharp objects when removing the packaging
as this may cause scratches to the unit.
SAVE THESE INSTRUCTIONS

3
Contents
Specification…………………………..….….3
Product Overview
FR001…………………………………….…..3
FR002…………………………………….…..4
Setting up FR002 ……………………...…....4
Setting up & Recharging …………….….….4
Using the power bank ………………....…...5
User Maintenance Instructions .……….…..5
Moving and Storage Instructions .….….…..5
Trouble Shooting………………………….…6
Specification FR001
Model: FR001
Battery cells: Li-ion 18650
Battery Capacity: 18900mAh
Input (Power in contacts): DC 20V/1.5A (max)
Type-C output: DC 5V/3A, 9V/3A, 15V/3A,
20V/3A (PD3.0 60W)
Type-A output: DC 5V/3A, 9V/2A, 12V/1.5A
(QC3.0 18W)
Total output: 78W (Both ports combined)
Dimensions: 136mm diameter x 33mm tall
Weight: 0.46KG
Operation Temperature: 5~35C
Packaging Content: 1 x FR001
Specification FR002
Model: FR002
Power Input: 20V/7.5A
Power output: 19.5V/7.5A
Dimensions: 145mm diameter x 21.5mm tall
Weight: 0.34KG
Packaging content: 1 x FR002, 1 x AC Power
Cord, 1 x Power Supply (20V/7.5A)
Product Overview – FR001
Reset button location
USB C Port
USB A Port
Power Button
LED Charge level indicator
Power Contact Rings

4
Product Overview – FR002
Power Out Contact Rings
Power Indicator
D.C. Jack – Power In
Setting Up FR002
1. Plug the AC cord into the power
supply.
2. Plug the AC plug into an outlet.
3. Plug the power out lead from the
power supply into the DC jack on at
the back of FR002. Power indicator
will illuminate green.
Setting Up & Recharging
FR001
IMPORTANT
Setting up
To recharge the power bank, place it onto the
dedicated charging base (FR002). The power
bank will be recharged via the contact pins on
the base of each unit. Multiple power banks
can be stacked on top of one another when
recharging.
The dedicated charge base (FR002) can
support 5 units with recharge times around 3
hours, or 5 plus units at extended recharge
times. *
A white LED will flash to indicate the power
bank is recharging. As the unit charges the
additional LED(s) will remain on until all four
LEDs are on constantly.
Power Supply
Power Supply

5
Using the Power Bank
FR001 can recharge any USB C or USB A
compatible device(s). Simply plug in the device
and press the power button on freedom to turn
it on. Four white LED’s will illuminate.
As FR001 discharges your device each LED
will go out systematically until the unit is
depleted.
User Maintenance
Instructions
Important – Cleaning
When cleaning FR001 do not spray cleaner
directly onto unit. Spray onto cloth and wipe
down the unit. Only spray enough cleaner that
the cloth is just damp to the touch.
When cleaning FR002 disconnect from mains
power before wiping down. Do not spray
cleaner directly onto unit. Spray onto cloth and
wipe down the unit. Only spray enough cleaner
that the cloth is just damp to the touch.
Moving & Storage
Instructions
Important - Long Term Storage
When storing FR001 for extended periods of
time you MUST discharge and recharge the
unit at least every 6 months to maintain the
integrity of the batteries.

6
Troubleshooting
Issue
Cause
Solution
All four LEDs flashing
simultaneous
The over-current protection is activated
during discharging.
Remove the over-loading device
The over-temperature protection is
activated during charging.
The Unit stopped charging as the
device operating temperature has been
exceeded.
The power bank can't be
charged.
The firmware is shutdown.
press the reset button.
Contact pins are not making good contact
with the charging plates.
Check that no debris is impeding
recharging via the contact rings/pins
and try again
your plugged-in device(s) are
not charging.
There is no capacity left.
Re-charge the power bank.
The firmware is shutdown.
Press the reset button.
The power bank isn't turned on.
Press the power button
The connection cable is not good.
Make sure the cable is in good
condition and undamaged. You may
need to try with another cable.
Unit run time is low
The capacity left is low
Re-charge the power bank.
The working current of devices is larger.
Battery degradation over time/usage
The battery life is close to end after use
around 300 times.
Battery degradation over time/usage