Coaster 100623 User manual

REVISION 0 : 12/10/2005
REVISION 1 : 02/15/2012
REVISION 2 : 07/21/2015
PAGE 1 OF 3
100623
DINING ARM CHAIR WITH WOODEN SEAT
ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
www.coastercompany.com

ASSEMBLY INSTRUCTIONS
PARTS IDENTIFICATION HARDWARE IDENTIFICATION
A 1 ALLEN WRENCH 1PC
2
B
3
C
4
D
5
E
6
F
7
G
STEP 1
www.coastercompany.com
SIDE RAIL
PAGE 2 OF 3
SIDE
STRETCHER 2PCS
2PCS
SHORT BOLT
NOTE : PHILLIPS HEAD SCREW DRIVER IS REQUIRED IN THE ASSEMBLY PROCESS.
HOWEVER, MANUFACTURER DOES NOT PROVIDE THIS ITEM.
LEFT ARM
REST 1PC
NYLON WASHER 6PCS
4PCS
1PC
1PC
WOOD SEAT
ITEM :
100623
LONG BOLT 6PCS
FRONT LEG
FRAME 1PC
RIGHT ARM
REST
6PCS
1PC
CHAIR BACK
NOTE : QUANTITIES SHOWN ARE FOR ONE CHAIR
WOOD PLUG 2PCS
LONG SCREW
SHORT SCREW
4PCS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instruction in the same sequence as numbered to assure fast & easy assembly.
!Warning!
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the
store immediately.
2. This product is for home use only and not intended for commercial establishment

ASSEMBLY INSTRUCTIONS
STEP 2
STEP 3
STEP 4
Complete
www.coastercompany.com
ITEM :
100623
PAGE 3 OF 3
G