COBHAM 806-005 Configuration guide

806-005 / 807-005 Audio Selector Panel
SM806 Installation and Operation Manual Supplement
Part #: 806-005, 807-005 Description: Audio Selector Panel
Document #: SM806-005-810-0 Rev: 1.00
SM806 Supplement Rev: 1.00 Oct 15, 2014 Page i
ENG-FORM: 810-0105.DOT
CONFIDENTIAL AND PROPRIETARY TO COBHAM
Prepared By: Geoff Melton Checked By: Ken Marshall Approved By: Robert Davis
Revisions
Rev.
DCA No.
Date
Description of Change
1.00 W14250 Oct 30, 2014 Initial release

INSTALLATION AND OPERATION
MANUAL SUPPLEMENT
Part #: 806-005, 807-005 Description: Audio Selector Panel
Document #: SM806-005-810-0 Rev: 1.00
SM806 Supplement Rev: 1.00 Oct 15, 2014 Page 1 of 3
CONFIDENTIAL AND PROPRIETARY TO COBHAM
This supplement contains installation and operation information that is unique to the
806-005 and 807-005. Installation and operation information common to the 806-000
and 807-000 base units can be found in the Installation and Operation section of the
SM806 Installation and Service Manual.
Note: This supplement replaces and obsoletes all previous supplements for the
806-005 and 807-005 Audio Selector Panels.
1 Description
This supplement describes the differences between the 806-000 / 807-000 base units,
and the 806-005 / 807-005 derivatives. All changes apply to both the 806-005 / 807-005
variants unless otherwise indicated.
ujfq
jf`
bjbo
l
u
v
q p kloj
NOec
^rql
`ljj
fkme
afpmi^v
m
c
a
j
c
a
kloj
`ar
N O
kloj
jho
_`k jho
ef
pmho
slf`b
^rafl
^iqk
ilkloj
kloj
^q`
N
O
p
q
_
v
fabkq
ad
cobb
_
l
q
e
N ajb O
^a`
N O
kloj
pibt
J H
^eop
N O
kloj
N k^s O
N `ljj O
m^
ec
ec=pbi`^i
mobpp
qbpq
N ^ac O
ec
ujfq
jf`
bjbo
l
u
v
kloj
NOec
^rql
`ljj
jho
_`k
pmho
slf`b
kloj
fabkq
ad
cobb
_
l
q
e
Najb O
pibt
J H
N k^s O
N `ljj O
m^
N ^ac O
q
p
ec=pbi`^i
Row 2
Row 1
Row 3
Row 4
Row 5
Row 6
806-005 807-005
Figure 1 – 806-005 and 807-005 Faceplates

806-005 / 807-005 Audio Selector Panel
SM806 Installation and Operation Manual Supplement
SM806 Supplement Rev: 1.00 Oct 15, 2014 Page 2 of 3
CONFIDENTIAL AND PROPRIETARY TO COBHAM
1.1 Functional/Cosmetic Changes
The 806-005 and 807-005 are identical to the 806-000 and 807-000 with the following
exceptions:
a) The 806-005 and 807-005 have HF SELCAL indicator/switch added to row 6 and
the associated circuitry is added onto the HF SELCAL indicator/switch.
2 Installation
For general Installation information and drawings, see Service Manual SM806 Section
2. Select the appropriate revision of the drawing for the serial number of the unit under
consideration. The drawings specific to this derivative are listed below, and can be
found at the end of this supplement.
2.1 Installation Drawings
DRAWING REV. DESCRIPTION TYPE SERIAL #
806-005
806-005-403-0 1.00 Audio Selector Panel Interconnect All
806-005-405-0 1.00 Audio Selector Panel Connector Map All
806-005-922-0 1.10 Audio Selector Panel Mech. Installation All
DRAWING REV. DESCRIPTION TYPE SERIAL #
807-005
807-005-403-0 1.00 Audio Selector Panel Interconnect All
807-005-405-0 1.00 Audio Selector Panel Connector Map All
807-005-922-0 1.10 Audio Selector Panel Mech. Installation All
3 Operation
For general Operation information, see Service Manual SM806 Section 3 with the
following exceptions:

806-005 / 807-005 Audio Selector Panel
SM806 Installation and Operation Manual Supplement
SM806 Supplement Rev: 1.00 Oct 15, 2014 Page 3 of 3
CONFIDENTIAL AND PROPRIETARY TO COBHAM
3.1 SELCAL indicator/switch
ec=pbi`^i
mobpp
qbpq
ec=pbi`^i
806-005 807-005
End of Installation and Operation Manual Supplement
The HF SELCAL indicator (row 6) indicates when a call
from the aircraft’s Selective Calling System is being
received. On 806-005, a switch also allows the operator
to apply a test signal to the SELCAL system.

Mating connectors
Unit Connector Unit Connector
Part No. Mating Connector Part No.
P1 (61-pin) Amphenol
TVP02RW-25-61P Amphenol D38999-26WJ61SN
Shielded wire must be used for all audio connections. AWG 20-22 size should be used for the input supply power and
power ground; panel lighting supply and return; knob lighting supply and return; and chassis ground. AWG 22-24 size
wire should be used for all other connections.
P1-A OXY MIC HI P1-i TEST MODE JUMPER IN
P1-B OXY MIC LO P1-j TEST MODE JUMPER OUT
P1-C OXY MIC MODE INTERCONNECT P1-k SPKR OUTPUT HI
P1-D NORM/OXY MIC TIP PTT P1-m SPKR OUTPUT LO
P1-E NORMAL MIC HI P1-n CHASSIS GND
P1-F NORMAL MIC LO P1-p +28 VDC
P1-G INPH MIC HI OUT P1-q POWER GROUND
P1-H INPH LISTEN P1-r SELCAL TEST SWITCH OUT
P1-J HAND MIC HI P1-s COMM1 MIC HI (1)
P1-K HAND MIC LO P1-t COMM1 KEY (1)
P1-L INPH SWITCH P1-u COMM5 KEY (N/C)
P1-M VOX THLD P1-v COMM2 KEY (2)
P1-N SPKR INPUT HI P1-w AW BYPASS OUT
P1-P SPKR INPUT LO P1-x N/C
P1-R MUX DATA LO P1-y PA VOL
P1-S MUX DATA HI P1-z AW BYPASS IN
P1-T CHASSIS GND P1-AA PA KEY
P1-U COMM3 MIC HI (HF) P1-BB PTT KEY SWITCH
P1-V COMM3 KEY (HF) P1-CC LIGHT NEUTRAL
P1-W N/C P1-DD LIGHT POSITIVE
P1-X N/C P1-EE CHASSIS GND
P1-Y COMM4 MIC HI (N/C) P1-FF COMM4 KEY (N/C)
P1-Z HAND MIC PTT P1-GG COMM5 MIC HI (N/C)
P1-a COMM2 MIC HI (2) P1-HH AUDIO COMMON
P1-b NORM SWITCH OUT P1-JJ MIC AUDIO COMMON
P1-c N/C P1-KK AUDIO ALTN SWITCH
P1-d N/C P1-LL CHASSIS GND
P1-e N/C P1-MM CHASSIS GND
P1-f SELCAL INDICATOR DIM P1-NN AUDIO COMMON
P1-g SELCAL INDICATOR IN P1-PP PA MIC HI
P1-h INPH MIC LO OUT
CONFIDENTIAL AND PROPRIETARY TO COBHAM
DRAWN
AP 11-30-10
CHECK APPROVED
TITLE
PINOUT LIST
PART NO.
FOR MODEL 806-005
DWG. TYPE
PINOUT LIST
SIZE
A
FILE
806-005 405-0.DOC
CAGE CODE
1B7G3
DRAWING NO.
806-005 405-0
SHEET
1 / 3
REV.
1.00

Mating connectors
Unit Connector Unit Connector
Part No. Mating Connector Part No.
P2 (61-pin) Amphenol
TVP02RW-25-61PC Amphenol D38999-26WJ61SC
Shielded wire must be used for all audio connections. AWG 20-22 size should be used for the input supply power and
power ground; panel lighting supply and return; knob lighting supply and return; and chassis ground. AWG 22-24 size
wire should be used for all other connections.
P2-A EMER 28V IN P2-i MFD 1
P2-B EMER 28V IN P2-j AFD CMN 1
P2-C DG FREE P2-k AFD CMN 2
P2-D N/C P2-m N/C
P2-E EMER SWITCH OUT P2-n N/C
P2-F N/C P2-p PFD 3
P2-G N/C P2-q PFD 2
P2-H N/C P2-r MFD 2
P2-J N/C P2-s MKR HI 3
P2-K N/C P2-t MKR HI 2
P2-L N/C P2-u MKR HI 1
P2-M N/C P2-v MKR SNS CMN
P2-N N/C P2-w AHRS 1
P2-P N/C P2-x ADC 1
P2-R N/C P2-y ADC CMN
P2-S N/C P2-z ADC 2
P2-T CDU 26 P2-AA AHRS 2
P2-U TDR CNM 2 P2-BB AHRS CMN
P2-V CDU 1 P2-CC CDU 11
P2-W CDU 2 P2-DD CDU 13
P2-X N/C P2-EE CDU 24
P2-Y N/C P2-FF N/C
P2-Z N/C P2-GG N/C
P2-a COMMON 22 P2-HH N/C
P2-b SLEW + P2-JJ N/C
P2-c SLEW - P2-KK N/C
P2-d TDR 12 P2-LL N/C
P2-e TDR 9 P2-MM N/C
P2-f TDR 3 P2-NN N/C
P2-g TDR 6 P2-PP N/C
P2-h PFD 1
CONFIDENTIAL AND PROPRIETARY TO COBHAM
DRAWN
AP 11-30-10
TITLE
PINOUT LIST
PART NO.
FOR MODEL 806-005
DWG. TYPE
PINOUT LIST
SIZE
A
FILE
806-005 405-0.DOC
CAGE CODE
1B7G3
DRAWING NO.
806-005 405-0
SHEET
2 / 3
REV.
1.00

806-005 Front Panel / 700-XXX Pin Association Table
This table describes which 700-XXX pin each 806-005 front panel control affects.
MODEL 806-005 FRONT PANEL CONTROL MODEL 700-XXX PIN
P1-12 COMM-1 HI
P1-11 COMM-1 SDTN HI6
COMM 1
P1-34 COMM-1/COMM-1 SDTN LO
P1-13 COMM-2 HI
P1-17 COMM-2 SDTN HI6
COMM 2
P1-35 COMM-2/COMM-2 SDTN LO
P1-8 COMM-3 HI
P1-19 COMM-3 SDTN HI6
COMM 3 (HF)
P1-31 COMM-3/COMM-3 SDTN LO
P1-7 COMM-4 HI
P1-18 COMM-4 SDTN HI6
COMM 4 (NOT INSTALLED)
P1-30 COMM-4/COMM-4 SDTN LO
P1-4 COMM-5 HI
P1-16 COMM-5 SDTN HI6
COMM 5 (NOT INSTALLED) P1-27 COMM-5/COMM-5 SDTN LO
NAV 1 P1-42 HI/P1-38 LO NAV-11
NAV 2 P1-21 HI/P1-40 LO NAV-21
DME 1 P1-15 HI/P1-57 LO DME-1
DME 2 P1-14 HI/P1-36 LO DME-2
ADF 1 P1-62 HI/P1-39 LO ADF-11
ADF 2 P1-41 HI/P1-37 LO ADF 21
MKR BCN P1-10 HI/P1-33 LO MKR-1
MKR 2 (NOT INSTALLED) P1-9 HI/P1-32 LO MKR-2
INPH P1-44/P1-45 INPH HI2
SPARE 1 (NOT INSTALLED) P1-6 HI/P1-29 LO SPARE-1
SPARE 2 (NOT INSTALLED) P1-5 HI/P1-28 LO SPARE-2
AUDIO ALTN SWITCH P1-3 EMERGENCY SWITCH
SPKR P1-53 HI/P1-51 LO SPKR
XMIT (PA) P1-20 PA SDTN HI3
VOL P1-2 HI/P1-25 LO HDPH
(T) VOX THRESHOLD TRIMMER P1-46 INPH SQUELCH (VOX THRESHOLD)
1. VOICE/BOTH/IDENT SWITCH CONTROLS VOICE OR TONE FILTERING FOR NAV1, NAV2, ADF1 AND ADF2 INPUTS OF MODEL 700.
2. HAND MIC PTT AND PTT SWITCH INPUTS TO 806-XXX CAUSE INPH AUDIO OF MODEL 700 TO BECOME MUTED FOR ALL
POSITIONS OF XMIT ROTARY SWITCH WHEN TRANSMITTING, EXCEPT PA. P1-44 IS ELECTRICALLY COMMON WITH P1-45
WITHIN THE MODEL 700. THERE IS NO AUDIO LO FOR INPH HI SINCE THE SIGNAL REFERENCE IS THE MODEL 700 POWER
GROUND.
3. HAND MIC PTT AND PTT SWITCH INPUTS TO 806-XXX CAUSE PA SIDETONE TO BECOME ACTIVE IF TRANSMITTING TO PA USING
XMIT ROTARY SWITCH PA POSITION.
4. OXY/NORM SWITCH WILL ACTIVATE SPKR WHEN SET TO OXY POSITION.
5. AUTO COMM SWITCH WILL CAUSE THE RECEIVER VOLUME CHANNEL THAT IS SELECTED BY THE XMIT ROTARY SWITCH TO
BECOME ACTIVE.
6. SIDETONE TRIMMER ON THE 806 FRONT PANEL CONTROLS THE MODEL 700 MASTER SIDETONE VOLUME.
REFER TO MODEL 700 PINOUT FOR ALL OTHER CONNECTIONS OF MODEL 700-[ ]
CONFIDENTIAL AND PROPRIETARY TO COBHAM
DRAWN
AP 11-30-10
TITLE
PINOUT LIST
PART NO.
FOR MODEL 806-005
DWG. TYPE
PINOUT LIST
SIZE
A
FILE
806-005 405-0.DOC
CAGE CODE
1B7G3
DRAWING NO.
806-005 405-0
SHEET
3 / 3
REV.
1.00