Cobra VnM SignMaker User manual

VnM®4 SignMaker
User Manual
Version 1.01
Updated 01/2014

Introduction ...............................................................................
VnM®4 SignMaker Quickstart ..................................................
VnM®4 SignMaker Overview ....................................................
Loading VnM®4 Ink Roll ...........................................................
Loading VnM®4 Media ..............................................................
VnM®4 SignMaker Setup ..........................................................
VnM®4 Keypad Navigation ......................................................
VnM®4 Keypad Templates .......................................................
A) 1 to 5 Line Horizontal ..........................................
B) 1 Line Vertical ......................................................
C) OSHA/ANSI Haz Com ..........................................
D) GHS Templates ....................................................
E) RTK Labels ..........................................................
F) Lock Out Tags .....................................................
G) Pipe Marking .......................................................
H) Barcode Labels ...................................................
I) VnM4 Apps ...........................................................
VnM®4 Print & Font Settings ...................................................
Fonts/Symbols ..........................................................................
OSHA/ANSI Safety Denitions .................................................
Pipe Marker Color Chart ...........................................................
Connecting to PC ......................................................................
Maintenance/Troubleshooting .................................................
Accessories ...............................................................................
Frequently Asked Questions ...................................................
Tech Support .............................................................................
2
3
4
5
6
7
8
9-17
9
10
11
12
13
14
15
16
17
18
19-20
21
22
23
24
25
25
26
Table of Contents
1

Thank you for purchasing the VnM®4 SignMaker by Cobra Systems, Inc.
The compact, high-performance VnM®4 SignMaker System has been
developed to provide an easy, fast, and hassle free solution to all your
industrial applications.
It includes a pre-programmed smart keyboard and thermal transfer sign
applications via USB connection (not supported unless pruchased with
VnM®LabelDirect).
Specications
Dimensions: 2.36” (L) x 8.39” (W) x 7.40” (H)
Operating Conditions: 5°-40° C (41°-104° F)
Storage Conditions: -40°-60° C (-40°-140° F)
Resolution: 203 DPI
AC Input: 100 - 240V Power Supply
DC Output: 24V 3.75A (external adaptor)
Print Speed: 2, 3, 4, 5, 6, or 7 inches per second
Connections: VnM®Keypad, USB, LPT
Warranty
VnM®4 SignMaker comes with a 3-Year Printer Warranty, 1-Year Printhead
Warranty, 6-Month Cutter Warranty, and 1-Year Keypad Warranty.
Out of the Box
The VnM®4 SignMaker System includes:
1. VnM®4 SignMaker Printer (1)
2. VnM®4 SignMaker Keypad
with RS232 Cable (1)
3. Printer Power Supply (1)
4. Printer Power Cord (1)
5. Printer USB Cable for
PC Connection (1)
6. Take-Up Core for
VnM®Ink (1)
7. VnM® Ink Take-Up
Spindles (2)
Introduction
2
1
23
7
4
5
6

VnM®4 SignMaker Quickstart
3
PRINTER MUST BE TURNED OFF!
Open printer lid by pressing
the green tabs on each side
located toward the front
of the printer.
Slide ink roll onto rst spindle and
set in rear hub. Pass ink roll leader
under the ink roll carriage, past the
printhead, and attach to the ink
roll take up core in front hub.
Easily slide new VnM Media
into roll mount.
Feed media face up under the support
bar and through the cutter slot.
Plug VnM4 Keypad & the power
cord into AC power cord socket at
the rear of the VnM4 Printer.
Plug power cord into a properly
grounded power outlet. Turn on VnM4
Printer, choose template and print.
1 2
3 4
5 6

VnM®4 SignMaker Overview
4
VnM4 SignMaker Top View
1. Ribbon access cover
2. LED indicator
3. Feed button
4. Printer top cover
5. Top cover open lever
6. Cutter
VnM4 SignMaker Rear View
1. USB interface
2. Parallel interface
3. RS-232 DB-9 interface
4. Power jack
5. Power switch
6. Rear VnM media guide
VnM4 SignMaker Interior View
1. Top cover
2. Top cover support
3. VnM media guide
4. Cutter
5. Printer head
6. Roll mount
7. Teon bar
1 2 3 4 5
6
1
2
3
4
5
6
1
2
3
4
5
6
7

Loading VnM®4 Ink Roll
5
Pull ink from
rear to the
front going
under the
print head
and up to
attach to the
mpty take-
up core.
Make sure
ink spindles
are as
shown,
note larger
circular end
on the right
side.
End Result:
close the
ink roll
access
cover.
Load rear
ink spindle
with the
unused
portion of
the ink roll.
Tape or
adhere
rear ink to
front take
up ink
spindle.
Wind the
front ink
spindle to
take up the
slack, make
sure there
are no
wrinkles in
the ink.
/IMPORTANT
TURN OFF PRINTER WHEN
CHANGING INK ROLLS
/IMPORTANT
FOLLOW INSTRUCTIONAL
DIAGRAM INSIDE PRINTER
PRINTER
MUST BE
TURNED
OFF! Open
the VnM®4
SignMaker
Printer and
the ribbon
access cover.
1Load front
ink spindle
with an
empty
take-up
core.
2
3 4
5 6
7 8

Loading VnM®4 Media
/IMPORTANT
HANDLE MEDIA ON THE SIDES
TO PREVENT BAD PRINTS
6
Pull media
through
cutter as
shown on
photo.
Leave a
small piece
of media
hanging out
of the printer.
Wind up any
extra material
and keep
straight.
Turn on your
VnM®4
Printer by
ipping the
power switch
located on the
back of the
printer. Start
printing your
instant signs.
Pull media
to go under
the white
platten
roller.
Adjust media
guide to t
the VnM®4
Media being
used and
keep the
media
centered.
Close the
top cover
slowly by
lifting up
the push
lever. DO
NOT SLAM
SHUT!
First, be
sure to
have the
correct
VnM®4
Media.
1Simply drop
the new
VnM®4
media roll
into the
printers roll
mount.
2
3 4
5 6
7 8

7
VnM®4 SignMaker Setup
Connecting VnM®4 Keypad and Power Up
1. Place printer on a at and secure surface.
2. Make sure the power switch is OFF.
3. Connect VnM4 Keypad to the VnM4 SignMaker RS-232 serial port.
4. Plug power cord into AC power cord socket at the rear of printer then
plug power cord into a properly grounded power outlet.
Optional Battery Pack
Power Supply
Plug
USB
Paralle RS232 Power Cable
Power Switch

HOW TO PRINT
QUOTATIONS!
VnM4 Tips
SELECT MEDIA WIDTH:
PRESS 1,2,3, or 4
SELECT FONT/SYMBOLS
PRESS ENTER
VNM PRINT SETTINGS
PRESS ENTER
8
VnM®4 Keypad Navigation
+
+
SELECT MEDIA WIDTH:
PRESS 1,2,3, or 4
Use the UP and
DOWN arrow keys on
the VnM®4 Keypad
to navigate through
the templates. Press
the ENTER key to
select your template .
Select Media Width is the default
prompt when powering on the VnM®4
SignMaker and when pressing the
ALT + EXIT keys.
To begin printing, rst select the
size media loaded inside the printer.
The VnM®4 keypad navigation tree to
the left displays the ow and order of
all the available options/templates.
More detailed information about the
templates are found further in the manual.
To get back to the main
menu (or if you made
a type error), press the
ALT key + EXIT key.
In order to print quotations (“) or inch
and foot marks, press the SHIFT key +
PERIOD key (on the numeric keypad).
Do not use the keypad QUOTATION
key, you will have blank text.
1 to 5 LINE HORIZONTAL
PRESS ENTER
OSHA TEMPLATES
PRESS ENTER
GHS TEMPLATES
PRESS ENTER
RTK LABEL TEMPLATES
PRESS ENTER
LOCK OUT TEMPLATES
PRESS ENTER
PIPE MARKING TEMPLATES
PRESS ENTER
BARCODE TEMPLATES
PRESS ENTER
VnM4 APPS
PRESS ENTER
1 LINE VERTICAL
PRESS ENTER
Default VnM®4 SignMaker Prompt

9
VnM®4 Keypad Templates - 1 to 5 Line Horizontal
PRINT UP TO
5 LINES OF TEXT
WITHOUT THE
USE OF A COMPUTER
OR SOFTWARE!
d) 5 Lines
c) 1 line template no reverse text (press N)
DANGER!
b) 1 line template reverse text (press Y)
1 to 5 LINE HORIZONTAL
PRESS ENTER
XINCH HOW MANY LINES?
PRESS 1,2,3,4 OR 5
RESERVE TEXT?
1.(Y)ES OR 2.(N)O
ENTER QUANTITY TO PRINT:
1
ENTER LINE l:
/CAUTION
1. Select the 1 to 5 Line Horizontal
template by pressing the ENTER
key on the VnM®4 Keypad.
2.
Select how many lines by pressing the
numbers 1, 2, 3, 4 or 5. Do not press
enter after pressing the amount of lines.
3. Enter the text/symbols for your sign
and once you nished the line or
sign, press the ENTER key.
4. Enter the quantity to print and
press ENTER.
5. Select if you would like reverse text.
Press Y or 1 for Yes.
Press N or 2 for No.
The 1 to 5 Line Horizontal template is the most versatile template for the VnM®4
SignMaker. Create anything from 1 to 5 lines of text and control the font size by
selecting the appropriate media size.
The sample sign below, a), was created by rst selecting the SYMBOLS1 font,
second selecting the 1 to 5 Line Horizontal template, then select the media width
and choosing 1 for how many lines, then typing, “/CAUTION” where the “/” on the
keypad screen represents / symbol.
a) 1 line template no reverse, symbols1 font
TO GET BACK TO THE MAIN
MENU PRESS AND HOLD
DOWN THE ALT KEY AND
EXIT BUTTON
VnM4 Tips

10
E
X
I
T
a) no reverse text
%
z
c) symbols1 font
P
5
9
1
d) no reverse text
E
X
I
T
b) reverse text
ENTER TEXT:
EXIT
REVERSE TEXT?
(Y)ES OR (N)O
ENTER QUANTITY TO PRINT:
1
1 LINE VERTICAL
PRESS ENTER
1. Select the 1 Line Vertical template
by pressing the ENTER key on the
VnM®4 Keypad.
2. Enter the text/symbols for your
vertical sign and once you nished
the sign, press the ENTER key.
3. Enter the quantity to print and
press ENTER.
4. Select if you would like reverse text.
Press Y or 1 for Yes.
Press N or 2 for No.
VnM®4 Keypad Templates - 1 Line Vertical
The 1 Line Vertical template allows you to easily create a vertical text on VnM®
Media. Below are samples created with the 1 Line Vertical template.
IF YOU ARE USING A
4” MEDIA, TRY USING A
2” TEMPLATE TO GET
A SMALLER FONT
VnM4 Tips

11
DANGER HEADER?
PRESS ENTER
XINCH HOW MANY LINES?
PRESS 1.2,3, OR 4
ENTER LINE 1:
HIGH
ENTER LINE 2:
VOLTAGE
ENTER QUANTITY TO PRINT:
1
OSHA/ANSI HAZ COM
PRESS ENTER
OSHA TEMPLATES
PRESS ENTER
1. Select the OSHA templates by
pressing the ENTER key on the
VnM®4 Keypad.
6.
Enter the text/symbols for your second
line of text, press the ENTER key
when the second line is complete.
2. Select the OSHA/ANSI Haz Com
template or Die Cut Templates
by pressing the ENTER key on the
VnM®4 Keypad.
Note: For our pre-printed OSHA/ANSI
media, select Die Cut Templates.
7. Enter the quantity to print and
press ENTER.
3.
Select a header option. Choose from
CAUTION, DANGER, NOTICE, SAFETY,
or
WARNING, then press ENTER.
4. Select how many lines by pressing the
numbers 1, 2, 3, or 4. Do not press
enter after pressing the amount of lines.
5. Enter the text/symbols for your rst
line of text, press the ENTER key
when the rst line is complete.
VnM®4 Keypad Templates - OSHA/ANSI Haz Com
The OSHA/ANSI Haz Com is perfect for creating Warning, Danger, Caution,
Notice and Safety labels. Below are samples created with the OSHA templates.
MUST WEAR
EAR AND EYE
PROTECTION
NOTICE
w
UNAUTHORIZED
PERSONNEL
WILL BE
PROSECUTED
a) OSHA/ANSI, DANGER, 2 Lines b) OSHA/ANSI, NOTICE, 3 Lines c) OSHA/ANSI, WARNING, 4 Lines
MUST WEAR
EAR AND EYE
PROTECTION
KEEP OUT
HIGH
VOLTAGE
HOT
SURFACE
EMPLOYEES
ONLY
Die Cut, WARNING Die Cut, DANGER2Die Cut, DANGER Die Cut, CAUTION Die Cut, NOTICE
HIGH
VOLTAGE
/DANGER
DIE CUT TEMPLATES
PRESS ENTER
or

12
VnM®4 Keypad Templates - GHS Templates
ENTER QUANTITY TO PRINT:
1
CHOOSE PICTOGRAM
Explosive
GHS TEMPLATES
PRESS ENTER
1. Select the GHS templates by
pressing the ENTER key on the
VnM®4 Keypad.
2. Select a pictogram. Use the icons
above and below to reference your
choice of pictogram, then press ENTER.
5. Enter the quantity to print and
press ENTER.
The GHS template is perfect for chemical labeling. The samples below were
created with our GHS template.
c) Flammablea) Explosive b) Toxic
f) Corrosive
e) Compressed
Gas
d) Oxidizing g) Irritant h) Environmentally
Damaging
i) Health
Hazard

RTK LABEL TEMPLATES
PRESS ENTER
1. Select the RTK Label Templates by
pressing the ENTER key on the
VnM®4 Keypad.
a) HMIS Templates b) RTK Templates
13
VnM®4 Keypad Templates - RTK Labels
4
OXY
44
4
4
4
CHEMICAL NAME
MANUFACTURE/COMPANY
DATE
NOTE
ENTER CHEMICAL NAME
ENTER COMPANY
04/20/2013
ENTER NOTE
4
a) HMIS Templates, 4x2 Label b) RTK Templates
4
OXY
44
Hazardous Chemical A
c) NFPA Templates, 4x3 Label
c) NFPA Templates
HMIS TEMPLATES
PRESS ENTER
2. Select the HMIS Templates and
press ENTER.
ENTER CHEMICAL NAME:
VNM SIGNMAKER
3. Enter the chemical’s name, press ENTER.
ENTER FLAMMABILITY:
PRESS 0,1,2,3 or 4
4. Enter the numerical Flammability
value of the chemical, press ENTER.
ENTER HEALTH:
PRESS 0,1,2,3 or 4
5. Enter the numerical Health value of
the chemical, press ENTER.
ENTER INSTABILITY:
PRESS 0,1,2,3 or 4
6. Enter the numerical Instability value
of the chemical, press ENTER.
ENTER PPE:
PRESS 0,1,2,3 or 4
7. Enter the numerical PPE value of the
chemical, press ENTER.
ENTER MANUFACTURE:
VNM
8. Enter the chemical manufacture.
ENTER DATE:
06/13/12
9. Enter the current date.
ENTER NOTE:
EASY AND FAST PRINTING
10.Enter any additional notes.
ENTER QUANTITY TO PRINT:
1
11. Enter the quantity to print, press ENTER.
NFPA TEMPLATES
PRESS ENTER
2. Select the NFPA Templates and
press ENTER.
ENTER FLAMMABILITY:
PRESS 0,1,2,3 or 4
3. Enter the numerical Flammability
value of the chemical, press ENTER.
ENTER HEALTH:
PRESS 0,1,2,3 or 4
4. Enter the numerical Health value of
the chemical, press ENTER.
ENTER INSTABILITY:
PRESS 0,1,2,3 or 4
5. Enter the numerical Instability value
of the chemical, press ENTER.
WHITE BOX OPTION:
Oxidizer
6. Select a Specic Hazard...
Choose from Acid, Alkali, Corrosive,
Oxidizer, Polymerization, Radioactive,
User No Water, Blank/Empty, and
press ENTER.
ENTER QUANTITY TO PRINT:
1
7. Enter the quantity to print, press ENTER.
RTK TEMPLATES
PRESS ENTER
2. Select the RTK Templates and
press ENTER.
ENTER FLAMMABILITY:
PRESS 0,1,2,3 or 4
3. Enter the numerical Flammability
value of the chemical, press ENTER.
ENTER HEALTH:
PRESS 0,1,2,3 or 4
4. Enter the numerical Health value of
the chemical, press ENTER.
ENTER INSTABILITY:
PRESS 0,1,2,3 or 4
5. Enter the numerical Instability value
of the chemical, press ENTER.
ENTER PPE:
PRESS 0,1,2,3 or 4
6. Enter the numerical PPE value of the
chemical, press ENTER.
ENTER QUANTITY TO PRINT:
1
7. Enter the quantity to print, press ENTER.

14
VnM®4 Keypad Templates - Lock Out Tags
a) Lock Out Templates, LOTO Template 1
THIS LOCK/TAG MAY ONLY
BE REMOVED BY:
NAME: JOHN DOE
DATE: 1/1/2014
JOB DESCRIPTION:
LOCATION ABC
GU143CM
ESTIMATED LENGTH OF JOB:
6/8/2014 9AM TO 12PM
OUT OF
SERVICE
DO NOT USE!
NAME: JOHN DOE
DATE: 1/1/2014
LOTO TEMPLATE 1
PRESS ENTER
LOCK OUT TEMPLATES
PRESS ENTER
1. Select the Lock Out Templates by
pressing the ENTER key on the
VnM®4 Keypad.
2. Select the LOTO Template 1 and
press ENTER.
b) Lock Out Templates, LOTO Template 2
a) LOTO Template 1
ENTER NAME:
JOHN DOE
3. Enter name of employee, press ENTER.
ENTER DATE:
1/1/2014
4. Enter the date and press ENTER.
NTER DESCRIPTION LINE 1:
LOCATION ABC
5. Enter the 1st line of job description
and press ENTER.
NTER DESCRIPTION LINE 2:
VALVE OPEN
6. Enter the 2nd line of job description
and press ENTER.
ENTER COMPLETION DATE:
6/8/2014 9AM TO 12PM
7. Enter the estimated completion date
for your job and press ENTER.
ENTER QUANTITY TO PRINT:
1
8. Enter the quantity to print and press
ENTER.
LOTO TEMPLATE 2
PRESS ENTER
2. Select the LOTO Template 2 and
press ENTER.
b) LOTO Template 2
ENTER NAME:
JOHN DOE
3. Enter name of employee, press ENTER.
ENTER DATE:
1/1/2014
4. Enter the date and press ENTER.
ENTER QUANTITY TO PRINT:
1
5. Enter the quantity to print and press
ENTER.

15
CHOOSE LABEL WIDTH:
4 X 32 INCHES (1-LINE)
CHOOSE LABEL WIDTH:
4 X 24 INCHES (1-LINE)
CHOOSE LABEL WIDTH:
3 X 24 INCHES (1-LINE)
CHOOSE LABEL WIDTH:
2 X 14 INCHES (1-LINE)
CHOOSE LABEL WIDTH:
2 X 12 INCHES (1-LINE)
CHOOSE LABEL WIDTH:
1 X 7 INCHES (1-LINE)
2INCH Repeat Label
PRESS ENTER
1INCH Repeat Label
PRESS ENTER
ENTER QUANTITY TO PRINT:
1
ENTER TEXT:
NITROGEN
PIPE MARKING TEMPLATES
PRESS ENTER
NITROGEN
a) 2 X 12 INCHES
FIRE SPRINKLER WATER
b) 1 x 7 INCHES
DOMESTIC CHILLED WATER
c) 3 x 24 INCHES
DOMESTIC CHILLED WATER
DOMESTIC CHILLED WATER
DOMESTIC CHILLED WATER
DOMESTIC CHILLED WATER
DOMESTIC CHILLED WATER
d) 2INCH Repeat Label
1. Select the Pipe Marking Templates
by pressing the ENTER key on the
VnM®4 Keypad.
2. Select the corresponding Pipe Marker
template with the diameter pipe your
are going to identify. Press the up and
down arrow key to go through the Pipe
Marker template selections.
3. Enter the text/symbols for the marker,
press the ENTER key when complete.
4. Enter the quantity to print and
press ENTER.
VnM®4 Keypad Templates - Pipe Marking
The Pipe Markers Template meets ANSI/ASMI letter height standards and tape
lengths. Create any custom pipe marker with the appropriate template.
Below is a 2 x 12 pipe marker identifying the contents of the pipe as NITROGEN (a).
IF YOU ARE NOT SURE
WHAT MARKING TEMPLATE
TO USE REFER THE VNM
PIPE MARKING GUIDE
VnM4 Tips

16
SELECT LABEL TYPE: 4INCH
4 X 1 ID LABEL
SELECT LABEL TYPE: 4INCH
4 X 1 ID LABEL
PRODUCT/ASSET ID:
PRODUCT ID LABEL
BARCODE NUMBER:
487569512341
ENTER DESCRIPTION:
BIN/SHELF LABEL
TER DESCRIPTION/COMPANY:
1789S412668
SELECT LABEL TYPE: 4INCH
4 X 2 BIN/SHELF LABEL
SELECT LABEL TYPE: 4INCH
4 X 2 BIN/SHELF LABEL
ENTER QUANTITY TO PRINT:
1
ENTER QUANTITY TO PRINT:
1
BIN / SHELF LABEL
487569512341
PRODUCT ID LABEL
1789S412668
BARCODE TEMPLATES
PRESS ENTER
a) 4 X 1 ID LABEL b) 4 X 2 ID BIN/SHELF LABEL
a) 4 X 1 ID LABEL b) 4 X 2 BIN LABEL
1. Select the Barcode Templates by
pressing the ENTER key on the
VnM®4 Keypad.
2.
Select the Barcode template you would
like by scrolling up and down.
VnM®4 Keypad Templates - Barcode Labels
The Barcode Template includes a basic inventory/asset and a bin/shelf barcode
template utilizing the CODE39 symbology.
Below are samples of the 4 x 1 and 4 x 2 barcode templates.
USE 2”, 3” AND 4” VNM MEDIA
FOR THE BARCODE TEMPLATES
DEPENDING ON THE LENGTH
OF YOUR BARCODES
VnM4 Tips

4. Arc Flash
Scroll down to VnM4 Apps, press ENTER >
Select Arc Flash, press ENTER >
Enter quantity to print, press ENTER.
Note: Must be using Die-Cut Header labels.
17
VnM®4 Keypad Templates - VnM4 Apps
c) VnM Apps, 4x18
b) VnM Apps, 4x12
e) VnM Apps, Aisle Markers, (2) Dash
Arc Flash and Shock Hazard
Appropriate PPE Required
Refer to NFPA 70E for minimum PPE requirements.
Do not operate controls or open covers without
appropriate personal protection equipment.
Failure to comply may result in injury or death!
f) VnM Apps, Arc Flash Template
1. Ruler App
Scroll down to VnM4 Apps, press ENTER > Select Ruler App, press ENTER. Enter
number of feet you would like (up to 3ft.).
2. Fire Extinguisher App
Scroll down to VnM4 Apps, press ENTER >
For 4x12 Fire Extinguisher Sign (b)
Select 4x10 Fire Ext, press ENTER >
Enter quantity to print, press ENTER.
For 4x18 Fire Extinguisher Sign (c)
Select 4x18 Fire Ext, press ENTER >
Enter quantity to print, press ENTER.
Note: Must be using 4” Media.
3. Aisle Markers
Scroll down to VnM4 Apps, press ENTER >
Select Aisle Markers, press ENTER >
Select Floor Marker Style...
Press 1 for Arrow or Press 2 for Dash >
Enter quantity to print, press ENTER.
a) VnM Apps, Ruler
d) VnM Apps, Aisle Markers, (1) Arrow

18
VnM®4 Print & Font Settings
To change VnM Print settings, including fonts and print speed and density, make
sure you are on the main default page by holding down ALT and pressing EXIT
on the keyboard.
4. Enter the speed to have your VnM printer
print at and press ENTER. Recommended.
5. Enter the density to have your VnM printer
print at and press ENTER. Recommended
density based on the color ink in the VnM:
Black: 1-6, White: 7-14
Blue: 1-3, Green: 1-3, Red: 1-3
SELECT MEDIA WIDTH:
PRESS 1,2,3, or 4
A) To Change Print Settings
1. This should be the rst screen you see.
VNM PRINT SETTINGS
PRESS ENTER
2. Press the down arrow key until you see
the VnM Print Settings and press ENTER.
VNM MANUAL SETTINGS
PRESS ENTER
3. To manually change the VnM speed
and density print settings, press ENTER
on the VnM Manual Settings.
ENTER DENSITY
5
ENTER SPEED
2
SELECT MEDIA WIDTH:
PRESS 1,2,3, or 4
B) To Change Font Settings
1. This should be the rst screen you see.
SELECT FONT/SYMBOLS
PRESS ENTER
2. Press the down arrow key until you see
the font/symbols and press ENTER.
CHOOSE FONT/SYMBOLS:
BOLD
3. Using the up and down arrows on the
keyboard, locate your desired font and
press ENTER. To get back to the main
screen after you have selected your font,
hold down ALT and press EXIT.
CHOOSE FONT/SYMBOLS:
SYMBOLS2
CHOOSE FONT/SYMBOLS:
SYMBOLS1
CHOOSE FONT/SYMBOLS:
NORMAL
CHOOSE FONT/SYMBOLS:
SYMBOLS3
CHOOSE FONT/SYMBOLS:
ROMAN
CHOOSE FONT/SYMBOLS:
UTILITY
CHOOSE FONT/SYMBOLS:
PIPE MARKER

19
Keypad 1 2 3 4 5 6 7 8 9 - + !
Normal 123456789 -+ !
Italic 123456789 -+ !
Bold 123456789-+!
Pipe Marker 123456789-+!
Utility 123456789-+!
Symbols 1 123456789- !
Symbols 2 123456789- + !
Symbols 3 1 2 3 4 5 6 7 8 9 - + !
Keypad A B C D E F G H I J K L
Normal A B C D E F G H I J K L
Italic A B C D E F G H I J K L
Bold A B C D E F G H I J K L
Pipe Marker A B C D E F G H I J K L
Utility A B C D E F G H I J K L
Symbols 1 A B C D E F G H I J K L
Symbols 2 A B C D E F G H I J K L
Symbols 3 A B C D EF G H I J K L
Keypad a b c d e f g h i j k l
Normal a b c d e f g h i j k l
Italic a b c d e f g h i j k l
Bold a b c d e f g h i j k l
Pipe Marker a b c d e f g h i j k l
Utility a b c d e f g h i j k l
Symbols 1 a b c d e f g h i j k l
Symbols 2 a b c d e f g h i jk l
Symbols 3 a b c d e f g h i j k l
When the Select Font template is selected, you can make a selection of 5 different
fonts that contains symbols and different styles. After selecting your font, use the
legend below to ensure you are getting the proper symbol for your sign.
Fonts/Symbols