Cocoon HE200074 User manual

• LED indicator will be flashing red. You will hear an audible
sound, this means your device is ready to pair
• If you have issues with this step, hold down the internal
reset button for 5 seconds and start again
• If you are still having issues, please check your instruction
manual
Scan this code
or search for
Cocoon Connect
First time users:
Register an account and follow the remaining prompts on screen
2. SELECT
FLOODLIGHT
CAMERA
1. ADD NEW
DEVICE
3. Confirm Pairing Mode 4. Add the CAMERA
1. BEFORE YOU START 2. App Setup

1. Hold the mobile phone 15 to 20cm in front of the Pan & Tilt
Camera for the camera to scan the QR code
2. Camera will beep when the code is scanned
3. Press ‘Heard the Beep’
Use, manage and control your Smart Floodlight Camera from the Cocoon
Connect app
If you have any issues with this step, ensure your password is correct
If you are still having issues, please check your Instruction Manual
5. Connect camera to wifi 6. SCAN QR CODE WITH CAMERA 7. camera added
successfully
8. control your
floodlight Camera