Cocoon HE190087 User manual

Scan this code
or search for
Cocoon Connect
Before you begin, make sure you have:
1. A mobile device - Android (V4.1 or later) or iOS (V8 or later)
2. A USB power source to charge the cameras
3. A Wi-Fi connection (have the password handy)
4. Download the Cocoon Connect app
For detailed instructions and videos, visit www.cocoonproducts.com.au
3. Connect Base Station2. Charge Cameras
First time users:
Register an account and follow the remaining prompts on screen
It is recommended you charge the batteries fully prior to use.
Connect the included USB cables to a USB power source (not
included)
Connect the base station to your router using the ethernet cable.
Connect the adapter into an electrical outlet
4. App Setup1. BEFORE YOU START

Use, manage and control your Wireless Security Camera System from
the Cocoon Connect app
5. ADD Base station
to app
From the main screen of the Cocoon Connect app, add a new
product and select Security Base Station, follow the prompts
To add the first camera, press +Add Device. You will be asked to
confirm that red indicator is blinking. Press next step and then next to
connect the camera. For further detailed instructions please reference
the instruction manual Repeat the exact same steps to connect the second camera
6. Add first camera 7. add second camera 8. control your Wireless
Security Camera System