CoffeeRacer Living User manual

CoeeRacer ‘Living’
USER MANUAL

Table of contents
1 Introduction 3
1.1 Symbols in this manual 3
1.2 Contact details 3
2 Description 4
2.1 Design and function 4
2.2 Main parts 4
2.3 Specications 4
2.4 Warranty 5
3 Safety 6
4 Installation 6
4.1 Delivery 7
4.2 Assembly 7
4.2.1 Preparation 8
4.2.2 Installing the pedals 9
4.2.3 Installing the steering wheel 10
4.2.4 Feeding the cables 11
4.2.5 Finalising the installation 12
5 Use 14
5.1 Before use 14
5.1.1 PlacingtheCoeeRacer 14
5.1.2 Folding up the bridge 14
5.1.3 Setting the pedals 15
5.2 UsingtheCoeeRacer 15
5.3 After use 16
5.3.1 Storing the pedals 16
5.3.2 Folding down the bridge 17
5.3.3 PuttingawaytheCoeeRacer 17
6 Troubleshooting 18
7 Disposal 18
8 Appendix I – Warranty 18
9 Appendix II – Compatibility 19

3CoeeRacer ‘Living’ USER MANUAL
1 Introduction
This manual contains instructions and safety information for the installation and use of the
CoeeRacer‘Living’anditsaccessories.StorethismanualwiththeCoeeRacer.
1.1 SYMBOLS IN THIS MANUAL
This manual contains safety instructions. Ignoring these instructions may lead to injury or
damage to the appliance. Each safety instruction is indicated with a signal word.
6CAUTION This symbol indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
NOTICE This symbol indicates a situation which, if not avoided, could result
in damage to the product.
Other symbols in this manual do not refer to safety.
4This symbol indicates information that might be useful to some users.
1.2 CONTACT DETAILS
Manufacturer CoeeRacer
E-mail info@CoeeRacer.com
Website CoeeRacer.com

4CoeeRacer ‘Living’ USER MANUAL
2 Description
2.1 DESIGN AND FUNCTION
TheCoeeRacer‘Living’isahighendracingsolutionforthosewhomakethemostoftheir
space.TheCoeeRacerisdesignedtoholdentryleveltosemi-professionalracingwheels
andpedals.TheCoeeRacercanfoldawayinsidetheboxtohideinplainsight.
2.2 MAIN PARTS
1
2
3
4
5
6
1 Lid/Tray
2Wheelbase plate
3Bridge
4 Adapterbox
5Pedal plate
6 Frame/Box
2.3 SPECIFICATIONS
Storage appearance Coeetable,plantstand
Envisioned use Console racing, living room
Seat Couch, lounge chair
Direct Drive wheelbases Yes,uptoCSLDDBoostkit/LogitechPro(11NM)
Load cell brakes capability Lowtomediumforce

5CoeeRacer ‘Living’ USER MANUAL
Handbrake / shifter DIY
Cable management Out the top when open, disconnected when stored
Mobility Slideacrosstheoor,magnetfeltpatches
Size (D × W × H) 70 × 48 × 40 cm without tray
Height wheelbase From 58 till 77 cm
Wheelbase depth adjustability 12 cm
Pedal plate depth 0 till 34 cm
Pedal plate inclination 0 to 20 degrees
Weight 34kg,mixsteel/alu
Frame 4 mm steel
Bridge & pedal plate 4 mm steel
Wheelbase plate 6 mm steel
Bottom plate Flush, for plant stand use
Cover Oak/Walnutherringbone
Fixings/clamps Quickreleases
Exterior colour BlackMetallic/Whitemetallic
Texturedpowdercoating
Interior colour Green and gold metallic
Texturedpowdercoating
Feet Magnetfelt/Feltstickers
Shipment Box35kg+box6kg
Assembly Factory assembled, welded & grinded
2.4 WARRANTY
ThetermsandconditionsthatapplytotheCoeeRacercanbefoundinAppendixI.

6CoeeRacer ‘Living’ USER MANUAL
3 Safety
6CAUTION Riskofinjury.
●Metal parts might be sharp.
●Unpack,assemble,andmovewithtwoormorepersons(weighs
over40kgw/outsteeringwheel).
●Watchyourngersandngersofotherswhenadjustingthe
position of the pedals or folding down the bridge.
●Ensure all fasteners are properly secured before operating the
CoeeRacer.
●CoeeRacerisnotatoyandshouldnotbeoperatedbychildren
without adult supervision.
NOTICE WronghandlingcoulddamagetheCoeeRacer.
●Donotusesharpobjectsduringunboxingtoavoiddamagingthe
powder coating.
●Makesurethescrewsgoinstraight.Donotapplyforceuntilthe
screw is completely in to avoid rethreading.
4 Installation
Estimated time for installation: 1 hour
6CAUTION Riskyofinjury.
●Unpack,assemble,andmovewithtwoormorepersons(weighs
over40kgw/outsteeringwheel).
NOTICE WronghandlingcoulddamagetheCoeeRacer.
●Donotusesharpobjectsduringunboxingtoavoiddamagingthe
powder coating.
●ProtecttheCoeeRacerandtheenvironmentbyassemblingon
amatt/rug.
●Makesurethescrewsgoinstraight.Donotapplyforceuntilthe
screw is completely in to avoid rethreading.

7CoeeRacer ‘Living’ USER MANUAL
4.1 DELIVERY
Thedeliveryconsistsof2boxeswithCoeeRacerparts.Pleasecheckifyourdeliveryis
complete.
1
2
3
4
5
8
7
6
9
q
w
4×
4×
2×
Box1:
1Frame with bridge
2 Squarefeltstickers
3Cable ties
4Velcro strip
5 Cablesock
6Velcro cable ties
7Square rubber strip
8 Silverangebolts
9 Silvercountersunkbolts
qThumbscrews
w Largerubberstrip
e
r
t
y
u
i
×4
OR
2×
Box2:
e Tray(coeetable)
rWheelbase plate
tMagnetic felt patches
(pedestal)
y Tray(pedestal)
uPedal plate
iThumbscrews
4.2 ASSEMBLY
NOTICE WronghandlingcoulddamagetheCoeeRacer.Protectthe
CoeeRacerandtheenvironmentbyassemblingonamatt/rug.
Requiredtools:
●Hexkey4mm(included)

8CoeeRacer ‘Living’ USER MANUAL
4.2.1 Preparation
RemovetheCoeeRacerfromitsbox.RemovetheplasticfromtheCoeeRacer.
Forthecoeetable:
●ApplysixfeltstickerstotheundersideoftheCoeeRacer.
For the pedestal:
●Applyfourfeltstickerstotherearside(driverside)oftheCoeeRacer.
●ApplytwomagnetfeltpatchestotheundersideoftheCoeeRacer.
First, fold up the bridge from the frame.
1. Releasethefourquickreleasesonthebridge.
1
3
2
2. Pull up the bridge until it cannot go any further.
3. Tilt the bridge upright.
4. Pullupthebridgecompletelyandhookthebridgeinracingmodebytiltingitrearwards
and lowering it.

9CoeeRacer ‘Living’ USER MANUAL
5. Fastenthebridgewiththefourquickreleases.
4.2.2 Installing the pedals
First mount the pedal set to the pedal plate:
4Holesarepre-drilledformostcommonpedalsets(seeAppendixIIforalistoftested
pedalsets).Forsomepedalsets,additionalholesmightberequired.
1. Flip the pedal set upside down.
2. Place the pedal plate upside down on top of the pedal plate.
3. Insertthesilverangeboltsinthepedalsetthroughthepedalplate.
4Twoscrewsonthefrontaretestedtobesucient.Youcanaddmoreiftheholepattern
allows.Youcandrilladditionalholesifyouhaveexperiencewithdrillingaluminium.
Finally, mount the pedal plate with the pedal set in the frame:
2
1
1. Slide the pedal plate into the frame.
2. Mountthepedalplatewiththefourhexbolts.

10CoeeRacer ‘Living’ USER MANUAL
4.2.3 Installing the steering wheel
NOTICE Avoid damage to the wheelbase. Attach the wheelbase to the
wheelbase plate with the correct size screws.
Steering wheels with bottom connectors allow cables to feed through the wheelbase plate.
Steeringwheelswithbackconnectorsrequireroutingthecablesaroundthebridge.
4The steering wheel depicted is an example. Yours may dier.
Holesarepre-drilledformostcommonwheels,seeAppendixIIforalistoftestedwheels.
For some wheelbases and pedal sets, additional holes might be required.
First mount the wheelbase to the wheelbase plate.
Ifyourwheelisttedwithbottomconnectors,rstfollowthesethreesteps:
1. Runthecablesthroughthecablesock.
2. Connect all the cables to the wheelbase.
3. Pull the cables through the cable hole in the wheelbase plate. Don not forget to feed the
pedal set cable as well and connect it to the wheelbase.
Ifyourwheelisttedwithbottomconnectors,continue.Ifyourwheelisttedwithback
connectors, start here:
1. Flip the wheelbase upside down.
2. Insertfoursilvercountersunkboltsinthewheelbasethroughthewheelbaseplate.