Welcome
This COLEMAN® product has been carefully engineered and manufactured to
give you dependable operation. Please read this manual thoroughly before
operating your new COLEMAN® product, as it contains the information you
need to become familiar with its features and obtain the performance that will
bring you continued enjoyment for many years. Please keep this manual on file
for future reference.
GENERAL OPERATING INSTRUCTIONS WHEN USING ANY BATTERY
OPERATED TOOL.
WARNING! READ AND UNDERSTAND ALL INSTRUCTIONS PRIOR
TO USING ANY POWER TOOLS. FAILURE TO DO SO MAY RESULT IN
ELECTRIC SHOCK, FIRE AND/OR SERIOUS PERSONAL INJURY.
1. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
2. Keep work area clean. Cluttered work areas and workbenches may cause
injury.
3. Be conscious of the work area. Do not use the power tools in damp or
moist areas. Do not expose power tools to rain. Do not use these tools in the
presence of flammable liquids or gases.
4. Keep work area well lit.
5. Keep out of reach of children.
6. Store idle tools. Remove the batteries and store tools in a dry place when
not in use.
7. Do not force tools. Forcing the tools can cause damage to the unit or
serious injury.
8. Use the right tool for the right job. Use power tools for the purpose
intended.
9. Dress properly. Do not wear loose clothing or dangling jewelry when
operating any power tool as they can be caught in moving parts. Rubber
gloves and nonskid footwear are recommended when working outdoors.
Keep longer hair pulled back.
10. Always wear protective safety glasses when operating power
tools. Wear a facemask when environment is dusty.
11. Secure items being worked on. Use a vice or clamp to securely hold the
item you are working on. Do not use your hands.
12. Never overreach. Keep proper footing and balance at all times.
13. Maintain tools. Keep tool blades sharp and keep tools clean for better and
safer performance. Inspect batteries before using them with the tools. Keep
hands dry and free from grease and oil when operating these power tools.
14. Disconnect tools. Remove the batteries from the tools before changing
bits and blades.This will prevent unintentional use.
15. Remove adjustment keys and wrenches. Form a habit to make sure
that the adjustment keys and wrenches are removed from the tools before
turning them ON.
16. Stay alert. To avoid injury pay attention to the work you are doing when
operating these power tools.
17. Check damaged parts. Before continuing to use any power tool, check
for damaged parts to determine that it will operate properly and perform
its intended function. Check alignment of moving parts, mounting of parts,
breakage of parts and anything else that may affect its operation. A part
that has been damaged or broken must be properly repaired or replaced by
an authorized service technician unless otherwise indicated in this manual.
Have damaged ON/OFF switches replaced by a qualified service technician.
Do not use a tool that will not turn OFF or ON.
18. Keep hands clear of moving parts.
19. Do not touch moving parts. Allow the power tool accessories (bit and
blades etc.) to cool before touching them.They can become extremely hot
during use and can burn your skin.
20. READ ALL INSTRUCTIONS BEFORE USING THESE POWERTOOLS.
SPECIFIC OPERATING INSTRUCTIONS WHEN USING THIS SAW.
1. Be sure to hold this tool by the insulated gripping surfaces when using it
for any operation where it is possible that the cutting tool may contact any
hidden wiring or the cord of the tool. Contact with a “live” wire will make
exposed metal parts of the tool “live” and may cause harm to the operator.
2. Use extra caution when cutting in hard to reach or high places. Be wary of
any possible wires or falling debris that may result from your use of this tool.
3. BE CERTAIN TO KEEP HANDS AND FEET AWAY FROM CUTTING
AREA. When the saw is in use, be sure to keep hands firmly gripped on the
tool. Never reach towards or below the cutting operation. Never use your
legs or feet to stabilize the cutting operation.
4.The operation of this saw may result in foreign objects being thrown into your
eye, which may result in severe damage. Before beginning any power tool
operation, always wear safety goggles or safety glasses with side shield and
a full- face shield when needed. Consider using a Wide Vision Safety Mask
for use over eyeglasses or standard safety glasses with side shields. Always
use eye protection that is marked to comply with ANSI287.1.
5.To ensure proper usage, always use a sharp blade. This will produce the best
results and minimize poor performance results.
6. WARNING: Some dust created by power sanding, sawing, grinding, drilling
and other construction activities contains chemicals known to cause cancer,
birth defects or other reproductive harm. Some examples of these
chemicals:
a. Lead from lead-based paints,
b. Cement and other masonry products,
c. Chemically-treated lumber
1 2
