Coleman Aktiv Sounds CBT60 User manual

Powering CBT60 On / Off
Press and Hold the POWER button for 4
seconds to power ON. You will hear an audible
tone. The speaker will automatically enter
Bluetooth Mode and a blue LED will flash quickly
to indicate that it is powered on and searching
for a Bluetooth source to pair with.
To power the speaker off, press the POWER
button to power off.
NOTE: The speaker will automatically power off
after several minutes if the Bluetooth connection
is not paired with a device.
NOTE: An additional battery icon will appear
next to the Bluetooth icon at the top right of your
battery level. This is compatible only with certain
devices.
Connecting CBT60 via Bluetooth
Once powered on, the speaker will automatically
enter pairing mode.
Bluetooth settings and enable Bluetooth. Next,
enter the Bluetooth device list and select
Coleman_CBT60. After selected, wait a few
seconds for the pairing to complete. Once the
pairing is successful, you will hear an audible
tone from the speaker and the indicator ring LED
will stay solid blue.
To forget the last paired device press and hold
the TWS button, this will allow you to connect a
new Bluetooth device to the speaker.
NOTE: The CBT60 will automatically connect to
Bluetooth radio is powered, enabled and within
reachable distance.

Linking another CBT60 for True Wireless
Sound
The CBT60 includes True Wireless Stereo
(TWS) technology. This enables you to link two
speakers to emit a true left / right stereo sound.
To connect two speakers over TWS make
sure both speakers are powered on and
disconnected from any Bluetooth devices.
Press the TWS on both speakers, an
audible tone will be heard from both
speakers. The TWS button will flash slowly
while the TWS is pairing. Once the two
speakers are connected you will hear
another audible tone and the TWS button
will stay lit. Once the two speakers are
connected, follow the steps to connect your
Bluetooth device to the speaker.
To disconnect from TWS simply press the
TWS button. Once TWS connection is made
between two speakers they will
automatically connect over TWS the next
time they are powered on and within range.
To forget the last TWS pairing press and
hold the TWS button, this will forget the last
TWS and Bluetooth connection.
Playing Music from a Memory Stick
If you would like to listen to music loaded on a
Memory Stick, simply power on the speaker and
insert a Memory Stick into the USB port on the
back of the speaker. Be sure that music is in
MP3 format and is stored in the root of the
will automatically start playing upon inserting a
Memory Stick. The speaker controls will function
as normal.
Listening to FM Radio
To listen to FM Radio, simply turn on the
speaker and press the MODE button to enter
FM Radio mode. While in Radio mode, press

and hold the PLAY/PAUSE button to auto
search for an FM Radio station and to store it
automatically. Press and hold the PLUS button
to go to the next stored station, press and hold
the MINUS button to go to the previous stored
station. Press the PLUS or MINUS button to
increase and decrease the volume. Press the
PLAY/PAUSE button to mute the speaker.
Connecting CBT60 via Auxiliary Input
If you would like to use a device that is not
equipped with Bluetooth technology, simply
connect the included auxiliary 3.5mm cable from
your device to the Aux-In input at the back of the
CBT60. Bluetooth audio will mute while a 3.5mm
cable is plugged in. While connected via
Auxiliary, the only controls that will function on
the speaker is the PLAY/PAUSE button. All
other functions are controlled from the
connected device.
Controlling the Sound on Your CBT60
PLAY / PAUSE
Tap the PLAY/PAUSE button.
VOLUME UP / DOWN
Press the + button to increase the volume and
press the - button to decrease the volume.
FORWARD / BACKWARD TRACK
Press and hold the + button to skip a track
forward. Press and hold the - button to go to the
previous track.
ANSWER / END PHONE CALL
Tap the PLAY/PAUSE button.
DECLINE PHONE CALL
Press and hold the PLAY/PAUSE button.

Answering or Making Calls
If there is an incoming call on your paired
phone/tablet, the music will pause and the ringer
will ring through the CBT60 speaker. To answer
a call, simply press the PLAY/PAUSE button.
While on the call, press and hold the
PLAY/PAUSE button to switch the call from the
speaker to your connected device. To end a call,
simply press the PLAY/PAUSE button.
To decline a phone call press and hold the
PLAY/PAUSE button.
NOTE: For best performance and clarity,
operate the CBT60
Ensure that the microphone faces your direction.
Siri/Google Assistant Controls
If your connected Bluetooth device has Siri or
Google Assistant then you can activate these
features using the SMART ASSISTANT button.
Press the SMART ASSISTANT button to
activate
assistant.
Charging your CBT60
Open the watertight sealed door, and simply
plug the included USB C cord into the USB C
port at the base of the speaker. The port is
labeled DC 5V. Once plugged in, the LED will
light up red. It will turn off once the internal
battery is fully charged.
Preserving the Waterproof Seal
Ensure that the back compartment door is fully
pushed in. This will prevent any dust and
moisture from entering the USB and AUX ports.
LED Lighting Control
The LED lighting around the passive subs are
automatically turned on when you power on the
speaker. To turn them off press and hold the

MODE button, press and hold the MODE button
again to turn them back on.
Factory Reset
If you are experiencing connectivity issues, you
may need to perform a hard reset on your
CBT60. To do so, push the reset button under
the door on the back of the speaker.
Specifications
Bluetooth Version: 4.2
Built-in Lithium-Polymer Battery: 3.7V, 6000mAh
Charging Voltage: 5V
Speaker: 50 7W x 2
Frequency: 100Hz-20KHz
1%
Effective Distance: 10M
Waterproof Grade: IPX6

Elite Brands Inc., 40 Wall Street, 61st Floor
New York, NY 10005 · Tel: [phone]
www.colemanoptics.com
Coleman, , are registered trademarks of
The Coleman Company, Inc. used under license
©2021 The Coleman Company, Inc.
The word mark and logos are registered trademarks
owned by the Bluetooth SIG, and any use of such marks
by Elite Brands Inc. is under license. Other trademarks and
trade names are those of their respective owners.