Introduction
Optical Fiber Identifier is an important tool for optical maintenance, which is used for
nondestructive fiber identification project. Meanwhile it also has Visual Fault Locator module with
fault location function and power meter function.
Using the macro bending technology on line for nondestructive testing, It can measure the signal
direction and power and avoid mis-operation resulting in interrupted lines.
Macro bending measurement. Macro bends are the use of fiber-optic bending leak out when the
weak optical signal, optical signal to detect the direction and intensity. Doesn’t damage optical
fiber, without interrupting communications, and direct detection of 2.5mm bare fiber, 0.9mm and
2.5mm fiber casing tight jumper.
Features
•Metal gripper
•No need to change the adaptor
•Build in VFL function
•Build in OPM function
•Display the relative core power
•Indicate the signal directions and power in fiber
•Indicate live or dark fiber
•Efficiently identifies the traffic direction and frequency tone
•Detect 270Hz, 1kHz, 2kHz from
laser source Lower power
indication