Comel MDT1065 User manual

MANUAL
MDT1065 / MDT1060

SAFETY PRECAUTIONS
Device
Environment
PRODUCT OVERVIEW
Package components
Front / Left / Right / Top / Bottom / Rear
GETTING STARTED
Inserting SIM card
Assemble with cradle (Be a vehicle cradle)
Assemble with cradle (Be a desktop dock station)
SPECIFICATION
SOFTWARE SUPPORT
CUSTOMIZATION SERVICES
SAFETY & REGULATORY COMPLIANCE
P.3
P.3
P.4
P.5
P.6
P.7 - P.8
P.9 - P.10
P.11 - P.12
P.13 - P.14
P.15
P.16 - P.19
TABLE OF CONTENTS

SAFETY PRECAUTIONS
Device
The tablet and the battery should not be thrown into the re and not be used in areas
where the temperature exceeds the specied values.
This can lead to the outbreak of a re or cause the battery to explode.
In addition, this will result in a leak occurring and the functionality
will be signicantly reduced or the tablet can no longer be used.
If you are charging the battery or when using the tablet, and you realize
that the temperature of the case is unusual high, please quit the applications,
because the battery has overheated.
Do not charge the battery continuously for more than 24hours.
Should this precautions be disregarded, there is no guarantee.
Please charge and discharge the device as one cycle at room temperature
when devices are stored for half year or above.
Do not attempt to repair, customize, or disassemble the device without
the appropriate knowledge and pre-cautions may lead to dangerous situations
with chance on damaging the product.
Do not use in extreme conditions such as high and low temperatures,
high humidity or moist environments and around magnetic elds.
Avoid long-time exposure to sunlight. Only use by the manufacturer
permitted accessories to avoid damages to the product with possibly warranty loss.
Environment
- Ambient temperatures are from -10

C to 40

C possible.
- The impact resistance was with a drop height of 1.2m tested.
P.3

Card
Screws:
21mm (M4) Philips Screws x 2 pcs.
21mm (M4) Hex Screws x 2 pcs.
12mm (M4) Philips Screws x 4 pcs.
9mm (M4) Philips Screws x 4 pcs.
3.5mm (M1.7) Philips Screws x 1 pc.
Tablet
which is covered by protective silicone sleeve
PRODUCT OVERVIEW
Package components
Tweezers
for removing Nano SIM
High power home adapter
(the tablet may not able to
charge if only use standard 5V, 2A adapter)
Metal Stand
Vehicle cradle or desktop dock station port-cover tape
for hidding non-use ports
Vehicle cradle
or
desktop dock station
Keys
P.4

PRODUCT OVERVIEW
Left View
Front / Left / Right / Top / Bottom / Rear
Front View Right View
Rear View
Top View
Bottom View
P.5

GETTING STARTED
Inserting SIM card
Micro SDXC card
SIM 2
SIM 1
2. Remove
the battery module
3. Insert SIM
1. Unlock
5. Lock
5. Insert
the battery module
Remark: Use tweezers to remove Nano SIM
P.6

GETTING STARTED
Assemble with cradle (Be a vehicle cradle):
Port-cover tape
for hidding non-use ports
P.7
As a vehicle cradle
Tablet

P.8
GETTING STARTED
Assemble with cradle (Be a vehicle cradle):

P.9
GETTING STARTED
Assemble with cradle (Be a desktop dock station):

P.10
GETTING STARTED
Assemble with cradle (Be a desktop dock station):
Cables go though the metal plate

P.11SPECIFICATION
* Specication is subject to change.
MODEL
MDT1065 (new!) MDT1060
CPU
OS
Memory
Dimensions 260mm (L) x 174mm (W) x 17mm (D)
Weight 930g
Display 10inch, IPS panel (1920 x 1200 pixel)
Touch Panel Capacitive multi-touch / Glove, Wet, Stylus
Backlight LED backlight
Power
Expansion Slot
Rechargeable Lit hium-ion Battery 3.85V 7600mAh
SIM 2 x Nano-SIM
Notification Audible tone, charging status LED
Voice / Audio Speaker, Microphone, Headphone
Keypad On-screen keypad
GPS GPS, GLONASS, GALILEO
Radio Frequency
GSM: 850/900/1800/1900MHz
WCDMA: B1/B2/B4/B5/B8
LTE FDD: B1/B2/B3/B4/B5/B7/B8/B12/B17/B20/B28
LTD TDD: B38/B40/B41
User accessible micro SD card slot
(standard supports up to 512G B)
Interface
Docking Connector (18-
1xUSB Type C 2.0 OTG
1x3.5mm Audio Headphone Jack
2xUSB Type A 2.0 OTG on the cradle
1xRJ45 Connector on the cradle
1xType C on the cradle for power supply
Andriod 11.0
with GMS or without GMS (Optional)
4GB LPDDR4X
32GB eMMC
2.0GHz Octa Core Processor (Express)2.0GHz Octa Core Processor (Pro)
Andriod 11.0
with GMS or without GMS (Optional)
4GB LPDDR4X
32GB eMMC
PERFORMANCE CHARACTERISTICS
PHYSICAL CHARACTERISTICS
WIRELESS WAN DATA AND VOICE COMMUNICATION
GLOBAL POSITIONING SYSTEM
802.11 b/g/n; 802.11 d/e/ h/i/j/k/r/v/w
Radio
2.4GHz: 802.11b/g/n — up to 144Mbps
Data Rate
WIRELESS LAN
Security and
Encryption
WFA WPA/WPA2 Personal, AES-CCMP,
WPI-SMS4, GCMP, WPS2.0, WAPI (hardware)

SPECIFICATION
* Specication is subject to change.
Camera
Video Input (Optional)
Rear camera 16.0MP AF with LED flash / Front camera 8.0MP
Scanner (Optional) 1D&2D Imagers
Support one channel AHD 720P,1080P and analog
camera (w/Cradle)
Support four channels AHD 720P,1080P and analog
camera (w/Camera Hub)
Bluetooth
DATA CAPTURE
WIRELESS PAN
WIRED LAN
Serial Communication 2 x RS232
NFC Supported TAG-ICs:
MIFARE Classic 1k/4k/Plus, MIFARE UltraLight
MIFARE UltraLight C, MIFARE DESFire
MIFARE DESFire Ev1, ISO 14443 A & B
ISO 15693
Light Sensor Ambient Light
Motion Sensor Accelerometer, E-Compass, Gyroscope
Humidity 90% non-condensing
Operating Temperature
Storage Temperature
Drop Specification 1.2m / 4 ft. to drop per MIL STD 810G
Electrostatic Discharge
(ESD)
+/-8kVdc air discharge
+/-4kVdc direct discharge
+/-4kVdc indirect discharge
-10oC to 40oC /
-14oF to 104oF
-20oC to 70oC /
-4oF to 158oF
Sealing IP67
SENSOR
USER ENVIRONMENT
Vehicle docking station
Metal dash mount
NFC reader at docking station
Extra input and output at docking station
OPTIONAL ACCESSORIES
v2.1+EDR, 3.0+HS, v4.1+HS
Ethernet Support (w/Cradle)
MODEL
MDT1065 MDT1060
P.12

P.13
We can provide serial port apk and NFC demo. Pls contact our Sales for details.
1. Pls also see the software setting for serial port
two serial ports are available on the device :
•One shares the the USB data pins of the mini A/B USB connector.
Only TX and RX pins are available, voltage is TTL 3.3V.
•One is on the Pogopin interface (pins 3, 5, 6 and 7).
TX, RX CTS and RTS are available, voltage is RS232 3.3V.
On the software side, the tty devices corresponding to these ports are :
•for the RS232 port, /dev/user_external_tty
•for the TTL port, /dev/user_tty
In addition, one I²Cport is available both on the USB and (Pogopin) connectors.
•The I²C interface is accessible through /dev/user_i2c
2. If your application want to read the ignition state, pls use below API.
The 12V input is reported to the application as a key press (high level pressed, low level depressed)
in the java Android API, this key is KeyEvent.KEYCODE_TV_INPUT
A second way to access the ignition state is to register a broadcast receiver for
the action "hk.topicon.intent.action.IGNITION"
The current ignition status is given by the extra boolean "state".
This intent is sticky, ie the application will be immediately notied of the current status at registration,
even if no transition occurred.
Here is a code sniplet :
private static nal String ACTION_IGNITION = "hk.topicon.intent.action.IGNITION";
private BroadcastReceiver mIgnitionReceiver = new BroadcastReceiver() {
public void onReceive(Context context, Intent intent) {
String action = intent.getAction();
if(!action.equals(ACTION_IGNITION))
return;
boolean state = intent.getBooleanExtra("state", false);
if(state)
Log.d(TAG, "ignition event is on");
else
Log.d(TAG, "ignition event is o");
}
};
SOFTWARE SUPPORT

SOFTWARE SUPPORT P.14
3. Power o or reset the device by applications
You can install the PowerProxy.apk package that will allow you to command power o
or reset with a simple broadcast from non-privileged application
(test application with source code is also provided.)
PowerProxy.apk needs to be installed through perso (as it needs to be a system application.
Pls download apk, source code from below link
https://drive.google.com/le/d/1QjDFnwe2h_KndVWEYWfxwvqY5zcSPI-n/view?usp=sharing
4. Install your apk and upgrade your apk remotely
4a) Install PackageInstallerProxy.apk through perso. You can also install if from the remote control server.
If you don’t install by perso or our remote control server, it will not work
After that you should have it in /oem/app/PackageInstallerProxy.vendor.apk
4b) Then install DemoPackageInstallerProxy.apk as a normal application and use it to install other packages.
Its source code is also provided for you to integrate it into your own code.
PackageInstallerProxy apk
https://drive.google.com/le/d/1QVKYrp0v9NoMcaOZP4pAIxE3GsUH4VyF/view?usp=sharing
PackageInstallerProxy demo and source code
https://drive.google.com/le/d/1oANWHYfhgl2lXYaSUhVzqzbcRwmKHLij/view?usp=sharing
https://drive.google.com/le/d/1l9mUPJAQB-J8RN8omR_V4yzf4U2yovQy/view?usp=sharing

CUSTOMIZATION SERVICES
Topicon’s device management server is developed to allow customer to
update dierent rmware and make kiosk mode function:
• BOOT ANIMATION
• INSTALL APK
• ADD APN
• DEFAULT SETTING
• CUSTOMIZED BUTTON
kiosk mode quick start guide :
https://docs.google.com/document/d/1nsodkquYQnIz6K0846ZwTNscECbnMiOzaJD_81x3cDo/edit
P.15

CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED
BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS
FCC RF Exposure Information and Statement
This device meets the government's requirements for exposure to radio waves.
The guidelines are based on standards that were developed by independent scientic
organizations through periodic and thorough evaluation of scientic studies. The standards
include a substantial safety margin designed to assure the safety of all persons regardless
of age or health. The SAR limit of USA (FCC) is 1.6 W/kg averaged.
Device types: portable device has also been tested against this SAR limit. SAR information
on this and other pad can be viewed on‐line at http://www.fcc.gov/oet/ea/fccid/.
Please use the device FCC ID number for search.
This device was tested simulation typical 0mm to body.
To maintain compliance with FCC RF exposure requirements, use accessories should maintain
a separation distance between the user's bodies mentioned above.
FCC Warning
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference
(2) This device must accept any interference received, including interference
that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment o and on,
the user is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modications to this unit not expressly approved
by the party responsible for compliance could void the user's authority to operate the equipment.
CE
The product shall only be connected to a USB interface of version USB2.0
and that the connection to a power USB is allowed.
Use careful with the earphone maybe possible excessive sound pressure from earphones
and headphones can cause hearing loss.
SAFETY AND REGULATORY COMPLIANCE P.16

SAFETY AND REGULATORY COMPLIANCE P.17
IC WARNING
This device contains licence-exempt transmitter(s) that comply with Innovation, Science and Economic
Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the
device.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation,
Sciences et Développement économique Canada applicables aux appareils radio exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes:
1. L’appareil ne doit pas produire de brouillage;
2.L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled
environment. The guidelines are based on standards that were developed by independent scientific
organizations through periodic and thorough evaluation of scientific studies. The standards include a
substantial safety margin designed to assure the safety of all persons regardless of age or health. The SAR
limit of IC is 1.6 W/kg averaged. Device: Tablet (IC: 21087-MDT1065) has also been tested against this
SAR limit. This device was tested simulation typical 0 mm to body. To maintain compliance with RF
exposure requirements, the use accessories should not contain metallic components in its assembly, the use of
accessories that do not satisfy these requirements may not comply with RF exposure requirements, and
should be avoided. The highest reported SAR value for body condition for separate function is 1.183W/kg
respectively.
L'équipement est conforme aux limites d'exposition aux rayonnements ambiants non contrôlés spécifiées
dans le document IC RSS - 102. Ces lignes directrices sont fondées sur des critères établis par des
organisations scientifiques indépendantes par le biais d'évaluations périodiques et approfondies de la
recherche scientifique. Ces normes comportent une marge de sécurité importante et visent à assurer la
sécurité de tous, quel que soit leur âge ou leur état de santé. La limite SAR pour IC est en moyenne de 1,6W/
kg. Équipement: Tablet (IC: 21087-MDT1065) a également été testée conformément à cette limite SAR.
L'appareil a fait l'objet d'essais de simulation, généralement à une distance de 0 mm. Afin de maintenir la
conformité aux exigences en matière d'exposition aux radiofréquences, les composants qui utilisent des
accessoires ne doivent pas contenir de pièces métalliques et les accessoires qui ne satisfont pas à ces
exigences peuvent ne pas être conformes aux exigences en matière d'exposition aux radiofréquences et
doivent être évités. Les valeurs SAR les plus élevées rapportées pour l'état physique des fonctions
individuelles étaient respectivement de 1.183W/kg.

SAFETY AND REGULATORY COMPLIANCE
Caution:
For the following equipment:
Product Name: Tablet
Brand Name: --
Model No.: MDT1065, MDT1060, LDT-101, X10, X10C, TABX10C, OBC1065, M1065A, M1065B,
MDT1065D
TOPICON HK LIMITED
E-mail: [email protected]
hereby declares that this [Name: Tablet, Model: MDT1065, MDT1060, LDT-101, X10, X10C, TABX10C,
OBC1065, M1065A, M1065B, MDT1065D] is in compliance with the essential requirements and other
relevant provisions of Directive 2014/53/EU.
Adapter shall be installed near the equipment and shall be easily accessible.
Only can use adapter as below:
Adapter Model: GS-W20A0938
Input:AC100-240V 50/60Hz 0.6A Output:DC5/9V/12V 3A/2.22A/1.67A
Shenzhen Good-she Technology Co., Ltd.
The plug considered as disconnect device of adapter.
RED Article 10 2
-This product can be used across EU member states
RED Article 10 10
-The product is class 1 product, No restrictions
The RF distance between body and product is 0mm
2G
Frequency Range:
RF Output Power:
GSM900: Tx: 880-915MHz, Rx: 925-960MHz
DCS1800: Tx: 1710-1785MHz, Rx: 1805-1880MHz
GSM900: 33.32dBm, GSM1800: 30.70dBm
EDGE900: 27.20dBm, EDGE1800: 24.26dBm
3G
Frequency Range: WCDMA Band 1: Tx: 1920-1980MHz, Rx: 2110-2170MHz
WCDMA Band 8: Tx: 880-915MHz, Rx: 925-960MHz
WCDMA Band 1: 24.36dBm, WCDMA Band 8: 24.13dBm
RF Output Power:
4G
Frequency Range:
Max.RF Output Power:
FDD-LTE Band 1: Tx: 1920-1980MHz, Rx: 2110-2170MHz
FDD-LTE Band 3: Tx: 1710-1785MHz, Rx: 1805-1880MHz
FDD-LTE Band 7: Tx: 2500-2570MHz, Rx: 2620-2690MHz
FDD-LTE Band 8: Tx: 880-915MHz, Rx: 925-960MHz
FDD-LTE Band 20: Tx: 832-862MHz, Rx: 791-821MHz
FDD-LTE Band 28: Tx: 703-748MHz, Rx: 758-803MHz
TDD-LTE Band 38: Tx: 2570-2620MHz, Rx: 2570-2620MHz
TDD-LTE Band 40: Tx: 2300-2400MHz, Rx: 2300-2400MHz
FDD-LTE Band 1: 23.83dBm, FDD-LTE Band 3: 23.16dBm,
FDD-LTE Band 7: 23.72dBm, FDD-LTE Band 8: 23.58dBm,
FDD-LTE Band 20: 23.62dBm, FDD-LTE Band 28: 23.72dBm,
TDD-LTE Band 38: 23.96dBm, TDD-LTE Band 40: 23.49dBm
P.18

SAFETY AND REGULATORY COMPLIANCE
Bluetooth V4.1
2402-2480MHz
9.46dBm (EIRP)
Bluetooth
Bluetooth Version:
Frequency Range:
Max.RF Output Power:
Wi-Fi (2.4GHz)
Frequency Range: 2412-2472MHz for 802.11b/g/n(HT20)
2422-2462MHz for 802.11n(HT40)
15.14dBm (EIRP)
1575.42MHz Receiving
Max.RF Output Power:
GPS
Frequency Range:
LORA
Frequency Range: 868.00MHz-868.6 MHz
869.4MHz-869.650 MHz
RF Output Power: 868.1MHz:13.04dBm(ERP)
868.3MHz:13.03dBm(ERP)
868.5MHz:13.02dBm(ERP)
869.525MHz:13.06dBm(ERP)
NFC
Frequency Range:
Radiated H-Field:
13.56MHz
14.49dBuA/m(@3m)
P.19