Comfort Products Graham 50-1801WN User manual

ASSEMBLY INSTRUCTIONS
Graham Writing Desk, Walnut
ASSEMBLY INSTRUCTIONS

Overview
A
B
C
D
E
L
L
H
I
J
N
N
K
M
M

Parts List
ABC
DE
FGH
IJK
L
M
N
A
B
C
D
ITEM DESCRIPTION STOCK#
Desktop
Left Wall
Right Wall
Bottom
51-1801WNA
51-1801WNB
51-1801WNC
51-1801WND

Parts List (cont.)
E
F
G
H
I
J
K
L
M
N
Shelf
Back Board
Drawer Front
Drawer Back
Drawer Left Side
Drawer Right Side
Drawer Bottom
Short Leg
Long Leg
File Rod
51-1801WNE
51-1801WNF
51-1801WNG
51-1801WNH
51-1801WNI
51-1801WNJ
51-1801WNK
51-1801WNL
51-1801WNM
51-1801WNN

1
2
3
4
5
6
7
8
9
10
12
8
12
16
4
2
8
1
1 SET
4
ITEM# DESCRIPTION QTY
HARDWARE KIT
51-1801WNHA
Cam Bolt
Dowel
Cam Lock
6x12mm Screw
4x35mm Wood Screw
4x18mm Screw
3.5x12mm Screw
Drawer Handle
Drawer Slides
7x55mm Wood Screw

1
STEP
INNER SLIDE
OUTER SLIDES
Separate the Drawer Slides 9 by fully extending the slide, then pressing down on the
black lever on the inside of the INNER most SLIDE. Continue to pull the Inner Slide until it is
free of the OUTTER SLIDES. Do this to both slides.

2
STEP
Turn four Cam Bolts (1) into the Desktop (A) and the Drawer Front (G) each.
1
AG
3
STEP
Insert four Dowels (2) into the Shelf, Left Wall, and Right Wall (E B, C) each.
B
C
E
2

4
STEP
Fasten the Outter Slides to the Left and Right Walls (B and C) using two 3.5x12mm Screws
(7) each.
Fasten the Inner Slides to the Left and Right Drawer Sides (I and J) in the same manner.
Turn two Cam Bolts (1) each into the Left and Right Walls (B and C).
•
•
•
B
C
1
1
1
1
IJ
7
7
7

5
STEP
Lay the Desktop on the floor upside down (A).
Push four Cam Locks (3) into the bottom of the Shelf (E).
Push two cams into the top of the Left and Ride Walls (C and B) each.
B
CE
F
C
A
3
•
•
•

6
STEP
Fasten the Bottom (D) onto the Walls using four 7x55mm Wood Screws (10).
C
D
A
10

7
STEP
Fasten the Short Legs (L) onto the Bottom (D), and the two Long Legs (M) to the Desktop (A)
using four 6x12mm Screws (4) each.
C
L
L
M
M
D
4

8
STEP
Mount the Drawer Sides (J and I) onto the Drawer Front (G) by first inserting two Cam
Locks (3) each, and then sliding the Drawer Sides onto the Cam Bolts on the Drawer Front.
Insert the File Rods (N) into the holes on the Drawer Front, and Insert the Drawer Bottom
(K).
Attach the Drawer Back (H) using four 4x35mm Screws (5).
Attach the Drawer Handle (8) using two 4x18mm Screws (6).
G
J
I3
N
N
K
H
5
5
6
8
•
•
•
•

9
STEP
Insert the Drawer.
Ball Bearing Retainer
Left Side Right Side
Disconnect Levers

60 lbs / 27.3 kgs
10 lbs / 4.5 kgs
20 lbs /
9.1 kgs
7
FINISHED
Insert the Drawer.

•
•
•
•
DO NOT stand on the desk. Do not use the desk as a stepladder.
ed.
Every 6 months, check all bolts and screws to ensure they are tight.
This product is California 93120 Compliant for Formaldehyde.
Comfort Products warrants this product to be free from defects in material and workmanship for one (1) year. This warranty is made by
Comfort Products only to the original end-user customer acquiring the product directly from Comfort Products’ authorized dealers
as shown by the original sales receipt. The end-user customer remedy pursuant to this warranty is limited to repair or replacement of
parts at Comfort Products’ option within a reasonable amount of time. Comfort Products reserves the right to require damaged parts
to be returned to Comfort Products upon request. Consent from Comfort Products must be obtained before any warranty work is
performed. This warranty applies under conditions of normal use and is not subject to defects caused by improper assembly or
disassembly; defects occurring after purchase due to product mo sure
to the elements; labor or assembly cost. This warranty does not cover the cost of transportation or labor. In no event shall Comfort
Products be liable in either tort or contract for any loss or direct, special, incidental, consequential or exemplary damages. This Limited
Warranty is NOT applicable to end-user customers who use Comfort Products for rental purposes. This warranty applies only to end-user
customers in the United States. All warranties are limited to the original purchaser for normal use. The weight capacity is de
60 pounds for the desktop, 20 pounds for the drawer, 10 lbs for the shelf. For claims or questions concerning this warranty, please visit:
www.comfortproducts.net or email us at: [email protected]
MODEL: # 50-1801WN
PLEASE VISIT WWW.COMFORTPRODUCTS.NET FOR WARRANTY INFORMATION