Commercial Electric S10WPK/850/DD/BZ/HD User manual

USE AND CARE GUIDE
LED WALL MOUNT PACK
DUSK TO DAWN OPERATION
Questions, problems, missing parts? Before returning to the store,
call Commercial Electric Customer Service
8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday
1-877-527-0313
HOMEDEPOT.COM
SKU #1008 376 291
Model #S10WPK/850/DD/BZ/HD
THANK YOU
We appreciate the trust and confidence you have placed in Commercial Electric through the purchase of this LED Wall Mount Pack.
We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products
available for your home improvement needs. Thank you for choosing Commercial Electric!

WARNING: Changes or modications to this unit not expressly
approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
WARNING: RISK OF CUTS. Some metal parts in the xture
may have sharp edges. To prevent cuts and scrapes, wear
gloves when handling the parts.
WARNING: RISK OF SHOCK. House electric current can cause
painful shock or serious injury unless handled properly.
CAUTION: Turn off the main power at the circuit breaker before
installing the xture, in order to prevent possible shock.
NOTICE: All electrical connections must be in accordance with local
and National Electrical Code (N.E.C.) standards. If you are unfamiliar with
proper electrical wiring connections obtain the services of a qualied
electrician.
Remove the xture and the mounting package from the box and make
sure that no parts are missing by referencing the illustrations on the
installation instructions.
FCC STATEMENT:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or
relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on
a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Any
changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.
Supplier’s Declaration of Conformity:
47 CFR § 2.1077 Compliance Information
Responsible Party:
Feit Electric Company
4901 Gregg Road,
Pico Rivera, CA 90660, USA
562-463-2852
Unique Identifier:
S10WKPK/850/DD/BZ/HD
Table of Contents
Safety Information
Limited Warranty
Table of Contents ...................................2
Safety Information ..................................2
Warranty ..........................................2
Pre-Installation.....................................3
Tools Required ....................................3
Hardware Included.................................3
Installation ........................................4
For your safety, always remember to:
□Turn off the power supply at the fuse or circuit breaker box
before you install the xture.
□Ground the xture to avoid potential electric shock and to
ensure reliable starting.
□Double-check all connections to be sure they are
tight and correct.
□Wear rubber soled shoes and work on a sturdy
wooden ladder.
□Account for small parts and destroy packing material, as these
may be hazardous to children.
This xture is designed for use in a circuit protected by a fuse or circuit
breaker. It is also designed to be installed in accordance with local
electrical codes. If you are unsure about your wiring, consult a qualied
electrician or local electrical inspector, and check your local electrical code.
Account for small parts and destroy packing material, as these may be
hazardous to children.
This product is warranted to be free from defects in workmanship and materials for up to 5 years from date of purchase. If it fails to do so,
please contact the Customer Service Team at 1-877-527-0313 or visit www.HomeDepot.com.
Product Specifications:
• 120 VAC, 60 Hz, 20.7 Watts
• Not Dimmable
• Wet Location
Dusk to Dawn Operation:
The light will turn on at dusk and remain on through the night until dawn.
The light will remain off throughout the day, until dusk.
NOTE: To make sure this function works properly, always have the switch
in the ‘ON’ poistion (including daytime).
2

HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
Part Description Quantity
AA Front Cover (Wall Mount Security Light) 1
BB Back Plate 1
CC
DD
EE
FF
GG
Wire Nuts
J-box Screws
Fixture Screws
Fixture Nuts
Crossbar
3
2
2
2
1
PACKAGE CONTENTS
TOOLS REQUIRED
Phillips
screwdriver
Pre-Installation
NOTE: Hardware not shown to actual size.
AA BB CC DD EE FF GG
3

FF
Wall Mount Installation
2 Removing Mounting Bracket
3 Mounting the Crossbar
4 Connecting the Wires
5 Mounting Mounting Bracket
6 Mounting the Front Cover
□Connect the power supply wires to the Back Plate (BB) wires
using the Wire Nuts (CC) Connect bare copper wire from Fixture
Back Plate (BB) to green or bare copper ground (house) wire,
neutral to white and hot to black. Feed the wires into the J-box.
□Mount Mounting Bracket (BB) onto the Crossbar (GG). Hand
tighten the Fixture Nuts (FF) to secure it.
□Remove the Front Cover (AA) from the Back Plate (BB)
by unscrewing the 2 Fixture Screws (EE) on the Front
Cover (AA). Then remove the Crossbar (GG) from the
Back Plate (BB) by unscrewing the 2 Fixture Nuts (FF)
holding the Crossbar.
□Mount Front Cover (AA) and 2 Fixture Screws (EE) onto the
Back Plate (BB). Hand tighten the 2 Fixture Screws (EE)
with a screw driver. To prevent water or moisture from
entering the fixture between
the fixture and mounting
surface, waterproof silicon,
caulk or gel should be applied
to seal any gaps around
the junction point.
□Make sure power is off. Mount Crossbar (G) onto J-box
using 2 J-box Screws (DD).
1 Turning Off the Power
□Turn the power OFF at the switch and
fusebox or the circuit breaker.
EE
AA BB
BB
CC
DD
GG
BB
FF
AA
EE
4

HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
Troubleshooting
Problem Possible Cause Solution
The light will not
illuminate.
The power is off. Make sure the power supply is on.
There is a faulty wire
connection.
Check the wiring. Contact a qualified and
licensed electrician if you are not comfortable
troubleshooting wiring problems.
There is a faulty wire switch. Test or replace the switch.
The light does not
automatically turn off
during daylight hours.
The photocell is covered. Remove any debris and clean the photosensor.
The photocell is in a dark or
shaded area.
Allow the photocell to recieve direct sunlight.

Questions, problems, missing parts? Before returning to the store,
call Commercial Electric Customer Service
8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday
1-877-527-0313
HOMEDEPOT.COM
Retain this manual for future use.