CommScope NETpodium 1-1671579-1 User manual

NETpodium Back Panels (1-1671579-1/1-1671579-2)
INSTRUCTION SHEET411-117005FEB 2017 REV B
1. Kit content
Back panel left 1 pc
Back panel right 1 pc
Back strip(included with 1-1671579-2) 1 pc
Assembly hardware
2. NETpodium aluminum profile
3. Install Back Panel Left
Place the rotating bracket in horizontal position.
Place the positioning bracket at the bottom of the back panel in
the horizontal groove of the NETpodium profile.
Make sure that the back panel is positioned in front of the
installed bracket.
Slide the back panel to the right and insert the positioning
brackets on the side of the back panel into the vertical groove of
the NETpodium profile.
T-Channel
Groove
Positioning bracket,
located at the BOTTOM
of the back panel
Positioning brackets,
located at the SIDE of
the back panel

NETpodium Back Panels (1-1671579-1/1-1671579-2)
INSTRUCTION SHEET411-117005
Turn the rotating bracket a quarter into the horizontal groove of
the NETpodium profile.
4. Install Back Panel Right
Place the positioning bracket at the bottom of the back panel in
the horizontal groove of the NETpodium profile.
Slide the back panel to the left and insert the positioning brackets
on the side of the back panel into the vertical groove of the
NETpodium profile.
Use an Allan key n°5 with conical head to fix the back panels with
screws and washers (torque of 3.5-4Nm).
The back panels need to be fixed in these 5 positions.
1
2
3
4
5
FEB 2017 REV B

NETpodium Back Panels (1-1671579-1/1-1671579-2)
INSTRUCTION SHEET411-117005
5. Install the Back Strip
(included with PN 1-1671579-2)
Install a back strip to close the gap between two NETpodium
racks installed side by side.
Use an Allan key n°5 with conical head to fix the back strip with
screws and washers (torque of 3.5-4Nm).
The back strip needsto be fixed at these 2 positions.
1
2
FEB 2017 REV B
Technical Support
Technical Assistance Center (TAC)
Tel.: [phone]
Email: [email protected]
www.commscope.com
This product is covered by one or more U.S. patents or their foreign equivalents. For patents, see
www.commscope.com/ProductPatent/ProductPatent.aspx.
To obtain information on CommScope products, visit our website at
®
http://www.commscope.com/SupportCenter.
While CommScope has made every reasonable effor to ensure the accuracy of the information in this document,
CommScope does not guarantee that it is error-free, nor does CommScope make any other representation, warranty, or
guarantee that the information is accurate, correct, reliable, or current. CommScope reserves the right to make any
adjustments to the information contained herein at any time without notice. CommScope expressly disclaims all implied
warranties regarding the information contained herein, including, but not limited to, any implied warranties of
merchantability or fitness for a particular purpose. The dimensions in this document are for reference purposes only and
are subject to change without notice. Specifications are subject to change without notice. Consult CommScope for the
latest dimensions and design specifications.
©2017 CommScope, Inc. All Rights Reserved 411-117005