CommScope OTE-M User manual

TC-1360-IP
Rev. A, July 2017
www.commscope.com
Installation Instructions
OTE-M Pole-Mount Bracket Kit
660001189 Rev A
RARA
© 2017 CommScope, Inc.
All rights reserved
This product is covered by one or more U.S.
patents or their foreign equivalents. For patents, see
www.commscope.com/ProductPatent/ProductPatent.aspx
1
Table of Contents
1 General. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2 Kit Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
3 Installing an OTE-M Pole-Mount Bracket Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
4 Product Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
1 General
The OTE-M Pole-Mount Bracket Kit is a unique solution designed for mounting CommScope’s Mini-OTE
300 in applications that require the product to be secured to a pole. See Figure 1.
Figure 1. OTE-M Pole-Mount Bracket Kit
MINI-OTE 300 TERMINAL ENCLOSURE
MOUNTING BRACKET
3/8” SELF-TAPPING SCREW
CABLE TIE
MOUNTING BRACKET
3/8” SELF-TAPPING SCREW
CABLE TIE SLOT
CABLE TIE SLOT
MOUNTING HOLES
MOUNTING HOLES

Page 2 of 2
TC-1360-IP
Installation Instructions
www.commscope.com
2 Kit Components
The OTE-M Pole-Mount Bracket Kit contains the following (see Figure 1 on Page 1):
• Mounting Bracket (2 ea)
• 3/8” Self-Tapping Screw (4 ea)
• Cable Tie (2 ea)
3 Installing an OTE-M Pole-Mount Bracket Kit
Use the following procedure to install an OTE-M Pole-Mount Bracket Kit (see Figure 1 on Page 1):
1. With the bracket’s cable tie feature (slot) facing away from the enclosure, align the mounting
holes of the brackets with the mounting holes of the enclosure.
2. Feed the 4 screws through the holes in the brackets, hand threading them into the holes in the
enclosure.
3. Securely tighten the screws with a 3/8” wrench.
4. Feed the 2 cable ties through the bracket cable tie feature (slot).
5. To secure a Mini-OTE 300 Enclosure to a pole encircle the pole with the cable ties and cinch
them thus securing the enclosure to the pole (see Figure 2).
Figure 2. Pole-Mounted Mini-OTE 300 Terminal Enclosure
4 Product Support
• To find out more about CommScope®products, visit us on the web at www.commscope.com/
• For technical assistance, customer service, or to report any missing/damaged parts, visit us at
http://www.commscope.com/SupportCenter