Walker Edison Beaverhead Espresso Highboy W70C32 Quick start guide

Copyright © 2012, by Walker Edison Furniture Co., LLC. All rights reserved.

Copyright © 2012, by Walker Edison Furniture Co., LLC. All rights reserved.

Copyright © 2012, by Walker Edison Furniture Co., LLC. All rights reserved.

Copyright © 2012, by Walker Edison Furniture Co., LLC. All rights reserved.
Insert dowels (A) into panels (2,3,4). Screw Cam Bolts (C) into panels (3,4).
Insert dowels (A) into panel (6). Insert dowels (B) into slats (9).

Copyright © 2012, by Walker Edison Furniture Co., LLC. All rights reserved.
Screw cam bolts (C) into top panel (1).
Screw cam bolts (C) into bottom panel (5).

Copyright © 2012, by Walker Edison Furniture Co., LLC. All rights reserved.
Attach panels (3,4) to panel (6) using cam bolts and dowels as guides. Secure panels (3,4)
to panel (6) using cam locks (D). Tighten cam locks (D) with a screwdriver.
Attach slats (9) to panels (3,4) using cam bolts and dowels as guides.

Copyright © 2012, by Walker Edison Furniture Co., LLC. All rights reserved.
Attach panels (2) to slats (9) using dowels as guides.
Attach the assembly from the previous step to bottom panel (5) using cam bolts and
dowels as guides.

Copyright © 2012, by Walker Edison Furniture Co., LLC. All rights reserved.
Secure panels (2,3) to bottom panel (5) using cam locks (D). Tighten cam locks (D) with
a screwdriver.
Secure panels (2,4) to bottom panel (5) using cam locks (D). Tighten cam locks (D) with
a screwdriver.

Copyright © 2012, by Walker Edison Furniture Co., LLC. All rights reserved.
Carefully fit top panel (1) into place using cam bolts and dowels as guides.
Secure top panel (1) to panels (2,3) using cam locks (D). Tighten cam locks (D) with
a screwdriver.

Copyright © 2012, by Walker Edison Furniture Co., LLC. All rights reserved.
Secure top panel (1) to panels (2,4) using cam locks (D). Tighten cam locks (D) with
a screwdriver.
Attach panel (11) to the back of the console using screw (G).

Copyright © 2012, by Walker Edison Furniture Co., LLC. All rights reserved.
Attach panel (10) to the back of the console using screws (G).
Attach panel (12) to the back of the console using screws (G).

Copyright © 2012, by Walker Edison Furniture Co., LLC. All rights reserved.
Attach panel (13) to the back of the console using screws (G).
Cover all visible cam locks with stickers (L) as desired.

Copyright © 2012, by Walker Edison Furniture Co., LLC. All rights reserved.
Inserts the shelf support pins (K) to the panel (2,3,4) at desired shelf heights.
Carefully place shelves (7,8) in console. Shelves (7,8) will rest on the shelf support pins.

Copyright © 2012, by Walker Edison Furniture Co., LLC. All rights reserved.
Attach hinges (H) to door (14,15) using screws (J). Repeat this step for the second set
of doors.
Attach doors (14) to panels (2) using screws (J) at hinges (H). See page 2 for specific
instructions on how to adjust hinges so doors are aligned with console as desired.
Attach handles (E) to doors (14) using bolts (F).

Copyright © 2012, by Walker Edison Furniture Co., LLC. All rights reserved.
Attach doors (15) to panels (3,4) using screws (J) at hinges (H). See page 2 for specific
instructions on how to adjust hinges so doors are aligned with console as desired.
Attach handles (E) to doors (15) using bolts (F).