Compro Technology TN2200 User manual

Quick Installation Guide
V1-130906
P/N: 3GA0310904
Model No.
TN2200
Before attempting to set up or operate this camera,
please read this installation guide and retain it for
future reference.
Mini Dome Network Camera
QR-code for camera installation
in the C4Home app.

Copyright
© 2013 Compro Technology, Inc. All rights reserved.
Trademark
Compro, and the Compro logo are trademarks of Compro Technology, Inc. C4Home
and C4Home logo are registered trademarks of AVSecur Technology, Inc. Microsoft,
Windows Vista, Windows and the Windows logo are trademarks of the Microsoft group
of companies. SD, SDHC and microSDHC Logos are trademarks of SD-3C, LLC. Apple,
Apple Logo, Mac, Mac OS, iPad, iPhone are trademarks of Apple Inc., registered in the
U.S. and other countries. Android is a registered trademark of Google, Inc. Other names
and marks are trademarks of their respective owners.
Restriction
No part of this document may be copied or reproduced in any form or by any means
without the prior written consent of Compro Technology, Inc.
Disclaimer
Compro Technology makes no warranties with respect to this documentation and
disclaims any implied warranties of merchantability, quality, or tness for any particu-
lar purpose. The information in this document is subject to change without notice.
COMPRO reserves the right to make revisions to this publication without obligation to
notify any person or entity of any such changes.
Compro Technology Inc.
www.comprosecurity.com
Tel. [phone], Fax [phone]
3F, No.12, Alley 6, Lane 45, Pao Shin Road, Hsin-
tien District, New Taipei City 231, Taiwan
Support e-mail: [email protected]

Compro TN2200 - Quick Installation Guide
1
Contents
Contents - Table of Contents
Important Notices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Regulatory Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Safety Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Package contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Hardware Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Wall / Ceiling Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Connect the Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Install C4Home App and Add Camera . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Adjust the Lens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Change SD Memory Card. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Instant Monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Reset to the Factory Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Technical Specications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
TN2200 Technical Specications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Technical Support Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Contact Compro Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Compro TN2200 - Quick Installation Guide
2Important Notices
Important Notices
Regulatory Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) This device
must accept any interference received, including interference that may cause undesired
operation.
FCC Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide rea-
sonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not in-
stalled and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on, the
user is encouraged to try to correct the interference by one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the re-
ceiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modications not expressly approved
by the party responsible for compliance could void the user's authority to operate this
equipment.
Safety Rules
• The camera ought to be installed by a qualied technician.
• Place the camera on a steady surface whenever possible.
• Do not drop the camera body to the ground; it may cause the damage to main parts.
• Do not shake, move or disturb the camera when it is in operation, as such actions may
result in the malfunction of the device.
• Power o the camera as soon as it is found smoking or smelt unusual.
• Please do not place the camera around the heat sources, such as television or micro-
wave oven.
• Please do not remodel the camera; it may cause damage or re.
• Please do not attempt to repair the camera on your own; contact Compro or your lo-
cal distributor for repair service.

Compro TN2200 - Quick Installation Guide
3
Product Overview
Product Overview
Package contents
The following is a list of items included in the package. Please check the package con-
tents on your hand. If anything is missing, please don’t hesitate to contact your local
distributor.
Qty Item Description
1 Network camera Compro TN2200 network camera
1 Wall mount base For mounting the camera on the wall
4 Self-tapping screw For fastening the wall mount base to the wall,
or for ceiling mouting the camera without using
wall mount base
4 Screw anchor For fastening wall mount base in concrete
2Screw for wall mount
base
For fastening the camera to the wall mount
base; must be used with rubber o-ring
2 Rubber O-ring Prevents water from entering the casing
1 Hex key For removing the camera's top cover
1 User's guide Providing instructions on installation
1 Installation CD Install IP camera via PC (Manual included)

Compro TN2200 - Quick Installation Guide
4Product Overview
Hardware Overview
Camera Layout

Compro TN2200 - Quick Installation Guide
5
Product Overview
No. Name Description
1 Ethernet port For connection to the network
2Socket head screw (4
in total )
To remove the top cover, unscrew the 4 socket head
screws with the supplied L-shaped wrench
3 Microphone pinhole For receiving ambient sound
4Screw holes for wall
mount base/ceiling
mounting
For installing the wall mount base; for ceiling mouting
the camera without the use of wall mount base
5 microSD card slot Push the memory card in order to release it
6 Composite video jack For connecting to a standad TV and helping you adjust
camera during installation
7 Lens Fixed iris, F 2.0, f 1.96mm
8 Reset button Press and hold the button to reset the camera back to
factory defaults
9 Tilt adjustment screw 2 tilt adjustment screws hold the tilting position of the
camera
10 Pan adjustment
screw
For holding the panning position of the camera

Compro TN2200 - Quick Installation Guide
6Installation
Installation
Wall / Ceiling Mount
The camera can be mounted on a wall or ceiling with or without the supplied wall
mount base installed. The wall mount base is generally used for wall mount applications
when the camera's cable is not run through the mounting surface.
Reset Button
Composite Video Output
microSD card slot
Wall Mount Base
If you want to feed the camera's cable through a dropped ceiling, you can drill a cable
hole on the mounting surface and then mount the camera without using the wall
mount base. The following sections explain 2 dierent mounting options.
Using Wall Mount Base
1. Use the supplied hex key to unscrew the top cover from the camera.
Rubber O-ring
2. Stick the supplied drill template A to the wall (or place the wall mount base
against the wall to mark the screw hole locations). Then drill 4 mounting holes on
the wall.

Compro TN2200 - Quick Installation Guide
7
Installation
Rubber O-ring
3. Then, if you're mounting on a concrete wall, insert a screw anchor into each of
the mounting holes. After that, secure the wall mount base to the wall with the
supplied self-tapping screws.
Rubber O-ring
4. Fasten the camera to the wall mount base on the wall. Make sure you use a sup-
plied rubber O-ring in between the screws and the screw holes (as circled) to
avoid moisture entering the casing. Finally, re-attach the camera’s top cover and
secure the screws tightly with the supplied hex key.

Compro TN2200 - Quick Installation Guide
8Installation
Rubber O-ring
Note: Should you ever need to detach the mounted camera from the wall in the future,
simply twist the camera in counter-clockwise direction and then pull it o the wall.
Rubber O-ring
80 mm Cable Hole

Compro TN2200 - Quick Installation Guide
9
Installation
Without Using Wall Mount Base
1. Use the supplied hex key to remove the top cover.
Rubber O-ring
2. Drill 2 mounting holes on the mounting surface. The 2 screw holes should be
spaced exactly 80 mm (3.15 inch) apart to correspond to the position of mount-
ing holes on the camera. (Or use the supplied drill template B to drill the mount-
ing holes.) Then drill a cable hole if you need to run the cable through the mount-
ing surface.
Rubber O-ring
80 mm Cable Hole
3. Fix the camera to the mounting surface with the supplied self-tapping screws.
Make sure you use a supplied rubber O-ring in between the screws and the screw
holes (as circled) to avoid moisture entering the casing. Feed the camera’s cable
through the cable hole. Lastly, re-attach the camera’s top cover and secure the
screws tightly with the supplied hex key.

Compro TN2200 - Quick Installation Guide
10 Installation
Rubber O-ring
80 mm Cable Hole
Connect the Cables
This camera can only be powered using PoE (Power-over-Ethernet), which allows elec-
trical power and IP data to be both delivered on a single Ethernet cable. The following
instructions explain ways to connect this PoE-enabeld network camera.
Using a PoE Switch
If the Ethernet ports on your network switch/router support PoE, connect your camera
in the following way:
Midspan
(PoE Injector)
PoE Switch
(802.3af class3) Wireless
Router/Hub
Wireless
Router/Hub
Internet
Internet

Compro TN2200 - Quick Installation Guide
11
Installation
1. Ethernet cable from wireless router/hub to PoE switch/router: Connect the PoE
switch/router with the wireless router/hub that has been connected to your
Cable/ADSL modem for internet connecting.
2. Ethernet port of the camera: Use the RJ-45 Ethernet cable (not supplied in the
package) to connect the Ethernet port of the network camera to the PoE port of
your PoE switch/router.
3. Make sure your smartphone is able to go to internet via your wireless router.
Using a Non-PoE Switch
If you are using the camera with a non PoE capable network switch/router, please pre-
pare a PoE injector (midspan, optional) rst in order to power the camera. Then connect
your camera in the following way:
Midspan
(PoE Injector)
PoE Switch
(802.3af class3) Wireless
Router/Hub
Wireless
Router/Hub
Internet
Internet
1. Ethernet port on PoE injector: Use a RJ-45 Ethernet cable (not supplied in the
package) to connect the RJ-45 connector on PoE injector marked “IN”. Then con-
nect the wireless router/hub.
2. Ethernet port on camera: Attach a RJ-45 Ethernet cable (not supplied in the pack-
age) from the “OUT” RJ-45 connector on PoE injector to the Ethernet port of the
network camera.
3. Make sure your smartphone is able to go to internet via your wireless router.

Compro TN2200 - Quick Installation Guide
12 Installation
Install C4Home App and Add Camera
Make sure your smartphone is able to go to internet via your wireless router. Then
download the C4Home app from Apple store or Google Play and install to your smart-
phone. Start C4Home app and register your personal C4Home account.
(You can scan the QR-code below on your smartphone to add C4home app.)
Login to the C4Home account and click “+” to add new camera, we provide 3 ways to
add your camera:
• Scan the QR code on the Ethernet connect of camera (or the rst page of this instal-
lation guide), it will automatically add your camera to the list.
• Direct input the camera ID (10 digitals under the QR code) and password (default:
admin) to add your camera.
• Click “iWizard” button on add camera page to search the available network camera
from your local network and setup.
Now you can watch live video of your network camera from your smartphone or tablet.
Note:
If you don’t have wireless connection in your local net-
work, please refer to the user’s manual on the installa-
tion CD to install the network camera via PC.

Compro TN2200 - Quick Installation Guide
13
Installation
Adjust the Lens
To adjust the direction of the lens, you need to remove the camera’s top cover rst. You
can connect the camera’s composite video jack to the video input jack of your TV to aid
you in lens adjustment.
Reset Button
Composite Video Output
microSD card slot
Adjust Pan/Tilt
To adjust the camera's panning or tilting position:
1. Loosen the pan adjustment screw and then gently twist the lens holder left or
right to adjust the camera's panning position. The camera allows for 40 degrees
of pan adjustment, as shown in below gure.
40°
90°
2. Tighten the pan adjustment screw and then, if necessary, go on to adjust the tilt-
ing position.
3. Loosen the tilt adjustment screw on both sides of the lens holder, as shown in be-
low gure, and then gently tilt the lens holder up or down to adjust the camera's
tilting position. The camera allows for 90 degrees of tilt adjustment.

Compro TN2200 - Quick Installation Guide
14 Installation
40°
90°
4. Having obtained the optimal result, tighten the tilt adjustment screws and re-
attach the top cover to complete the operation.
Change SD Memory Card
The camera comes with a 4GB microSD card pre-installed inside the housing. The SD
memory card is user-upgradeable. The following explains how to change the SD memo-
ry card.
1. Power o the camera. Then loosen the xing screws on the top cover with the
supplied hex key and remove the top cover.
2. Locate the microSD card slot. Then push the pre-installed SD card gently to re-
lease it.
Reset Button
Composite Video Output
microSD card slot
3. Pull the SD card out and insert a new one into the slot. Finally, re-install the top
cover to complete the upgrade.

Compro TN2200 - Quick Installation Guide
15
Operation
Operation
Instant Monitoring
From C4Home iPhone/Android App
When you enable and register the C4Home service, you can use the C4Home app on
your iPhone, Android phone or tablet to manage and watch live video of Compro cloud
network cameras.
The C4Home app is a safe and easy way to monitor your home, oce and your valuable
possessions from anywhere in the world. No router setup required, only needs to start
your C4Home app and login with your account, you can watch live video of your net-
work camera and manage multiple cameras from your smartphone or tablet on hand.
C4Home Login Page
Start the C4Home app from your smartphone, you can login here with your own Ac-
count ID and Password. If you forgot your password, please click the “Forgot your pass-
word”button, the system will send the password to your register email account.
Icon Name Description
Create
account
Here you can create the new account, please in-
put the new account ID, password and email ac-
count for account registration.
Setup Here you can input your account ID, password
and server address (default server: www.c4home.
com) for enable/disable auto-login. And you can
choose the display language here.

Compro TN2200 - Quick Installation Guide
16 Operation
Camera Page
After login the C4Home app, you will see the camera page, here shows the camera list,
you can click to watch the live video or you can click the buttons below for more fea-
tures.
Icon Name Description
Edit Click here to remove the installed network camera
from list.
Add Camera Click here to add camera to the list.
Camera
Setup
Here you can setup more details for each camera:
• Camera Settings: Setup the camera name
and password
• Stream Settings: Seup the Codec, Resolu-
tion, Frame rate for video streaming and
Enable/Disable audio and Codec for audio
streaming.
• Notification Settings: Enable/Disable mo-
tion detection and select the sensitivity level
for motion detection.
• Sharing Settings: Enable/Disable the camera
sharing to others. You can add your friends'
account ID to share the live video watching.
• Firmware Update: Firmware update direct
from your smartphone.
• Private Mode: Enable/Disable private mode
to protect your privacy.
Camera
Page List all the available camera here and you can click
to watch the live video.
Event
Page
List all the happened events by time, includes the
camera online/offline and motion detection. You
can click the listed event to watch:
• Liveview: Watch the live video of network
camera.
• Snapshot Playback/Download: Playback
and download the snapshots. When the event
trigger, the camera will take 3 snapshots for
record and you can know what’s happened.

Compro TN2200 - Quick Installation Guide
17
Operation
Icon Name Description
Setup
Page
Click here for basic settings of C4Home app:
• Language: Select the display language for
C4Home app.
• Stream Buer Size: Setup the stream buer
size for low, median or high.
• Auto Login: Enable/Disable auto login for
C4Home app.
• Push Notification: Enable/Disable the push
notification for your device. If you enable it,
it will send you the push notification when
event triggered.
• Logout: Logout the C4Home app.
About
Camera
Here will shows the version number of C4Home
app and copyright information.
Note:
For complete C4Home app introduction, please refer to
the C4Home user’s manual on the installation CD.
Reset to the Factory Default Settings
If you forget your system password or if you feel your IP camera has been acting weird,
you can follow the steps below to reset the camera to its default state in which it will be
obtaining IP address from the available local DHCP server. To reset the camera:
1. Detach the camera's top cover. Locate the reset button as shown in below gure.
Reset Button
Composite Video Output
microSD card slot
2. Press and hold the reset button for about 10 seconds.
3. After the camera is reset, it will take 1 minute to reboot. Please wait patiently and
start the Compro iWizard later again to scan for and re-congure the camera.

Compro TN2200 - Quick Installation Guide
18 Technical Specications
Technical Specications
TN2200 Technical Specications
CAMERA
Sensor 1/3" CMOS 2-Megapixel sensor
Lens Fixed iris, F 2.0, f 1.96mm
Zoom 10x digital
Angle of View 105°
Min Illumination 1.0 lux
Shutter Time 1/5 ~ 1/16000 Sec.
Camera Angle
Adjustment 40° pan, 90° tilt
VIDEO
Video Format M-JPEG, H.264
Resolutions 160x120, 320 x 240, 640 x 480, 1280 x 1024, 1600
x 1200
Frame Rate •WebVUer:Upto15FPSat1600x1200
•C4HomeApp:Upto30FPSat640x480
Video Streaming Dual video stream supported
Image Settings
•Adjustableimagesizeandquality
•AGC,AWB,AES
•Configurablebrightness,saturationand
sharpness
Analog Video
Output Yes, RCA output for lens adjustment
AUDIO
Compression
Format G.711 PCM 64 Kbit/sec, AAC
Audio Input /
Output Built-in microphone
Network
Security User ID / Password protection
Ethernet 10/100 Base-T, autosensing, RJ-45
Support Protocols
3GPP, ARP, DDNS, DHCP, DNS, FTP, ICMP/IPv4, IGP,
HTTP, NTP, PPPoE, QoS, RSP, RTSP, SMTP, TCP/IP,
UDP, UPnP
Firmware Firmware •SupportUPnP
•Supportonlinermwareupdate