compulocks Mac Studio MSSTD01 User manual

1
Assembly Instructions
Mac Studio Security Desktop Stand SKU: MSSTD01
©Compulocks Brands Inc. All Rights Reserved.j
www.compulocks.com | [e-mail] | [phone] Sheet 1 of 2
OR Bonding Stand
REMOVE COVER FROM ONE SIDE OF ADHESIVE TAPE
AND ADHERE TO STAND APPROXIMATELY WHERE
SHOWN. AFTER INSTALLATION REMOVE SECOND TAPE
COVER AND ADHERE TO PREPARED SURFACE
LOWER COVER
TOP COVER
7.36”
187mm
2.36”
60mm
7.75”
197mm
3.54”
90mm
3/32”-.094”
2.4mm
2X
2
CLEAN BOTTOM OF STAND
USING ALCOHOL PAD PROVIDED
7.3”
185mm
7.3”
185mm
IF BONDING STAND TO COUNTER
CLEAN AREA TO SIZE SHOWN WHERE
STAND WILL BE PLACED USING
ALCOHOL PAD PROVIDED
REMOVE COVER FROM FEET AND ADHERE TO BASE
APPROXIMATELY WHERE SHOWN
Free Standing Base OR Screw Fixed
ADHERE FEET AS PER FREE STANDING BASE
SECURE BASE TO FLAT SURFACE USING
TAMPER PROOF SCREWS PROVIDED.
THERE WILL BE A 1mm / 0.04" GAP
BETWEEN STAND AND COUNTER
TOP TO ALLOW FOR LOCK HEAD
FULL BOND STRENGTH
WILL OCCUR IN 48 HRS.

Security Options
3
Assembly Instructions
©Compulocks Brands Inc. All Rights Reserved.j
www.compulocks.com | [e-mail] | [phone] Sheet 2 of 2
IN THE BOX
Mounting Kit Mac Studio Security Desktop Stand
Hardware Kit
Mac Studio Security Desktop Stand SKU: MSSTD01
4
PLACE MAC STUDIO ON STAND
FREESTANDING BASE OPTION
USE ONE (1) CL15 SECURITY KEYED CABLE LOCK
ON THE MAC STUDIO
BONDED OR SCREW FIXED BASE OPTION
USE ONE (1) CL02H SECURITY KEYED DUAL HEAD COILED CABLE LOCK
ATTACHED TO THE MAC STUDIO AND THE STAND