
1
2
3
456
MyPlace
Conform Sound
Quick Start
Line-In
The Line-In input can be used for connec-
ting sound sources such as smartphones,
tablets, computer, hi- equipment, tele-
vision sets, etc. The sound coming from
Line-In can also be sent to the secondary
unit via TWS.
Line-Out
Line-Out is always active and can be used
to connect peripherals like headphones, etc.
Choosing sound source
Toggle between Bluetooth®and a Line-In
source (toggle only available on the primary
unit if having an active TWS connection) by
pressing the PWR button.
Power and charging
Connect the power adapter to your electrical
outlet and then the cable to the unit’s
magnetic power connector. When the cable
is connected the internal batteries are
charged until full.
Turning On/Off
To start the unit, press the PWR button.
To turn the unit off, press the PWR button
for 1 second.
Bluetooth®pairing and connection
If the unit is off, you enter the pairing mode
by pressing the PWR button for 3 seconds
until the LED starts blinking blue. If the unit
is already on, you double-click PWR.
Make a Bluetooth®search on the device you
want to connect and select the item called
“Conform Sound by Orlo XX” (XX is a
number between 01 and 99). The connection
will be conrmed by a pairing sound from
the unit, which is now ready to receive
sound over Bluetooth®.
Pairing two chairs
It is possible to connect two chairs to each
other via Bluetooth®. Double-click the
TWS button on both chairs. They will then
nd each other within a few seconds. To
connect TWS, short press the TWS button
once; to disconnect, press the TWS button
for 1 second.
The unit playing sound and/or having a
Line-In cable connected will dynamically
become the primary unit - and the other
will become a secondary, replicating unit.
1. PWR button 2. TWS button
3. LED indicator 4. Line-Out
5. Power 6. Line-In
The complete manual and
how-to videos are available at
conform.se/en-us/conformsound
Conform
Sound
by Orlo