Conair VS Sassoon For Men SUPER CLIP XTP User manual

1
TOOL TIPS
for the precision hair clipper
for professional at-home hair cutting.
VSM7476A
SUPER
CLIPXTP

2
HEY YOU!
TAKE A BOW FINE SIR.
THINGS ARE LOOKING UP
& YOU’VE JUST MADE A
QUALITY PURCHASE
WITH THIS NEW GROOMING TOOL.
WE KNOW YOU’VE GOT THIS, BUT BEFORE YOU JUMP INTO
USING YOUR NEW SIDE KICK, HERE’S A FEW TIPS & TRICKS
TO KNOW BEFORE LETTING YOUR CREATIVITY RUN LOOSE.
HIT UP VSFORMEN.COM.AU FOR MORE GROOMING & INSPIRATION.

SUPER CLIP XTP / TOOL TIPS
3

SUPER CLIP XTP / TOOL TIPS
4
IMPORTANT SAFETY
INSTRUCTIONS
When using electrical appliances, especially when children are present, basic
safety instructions should always be followed, including the following:
Polythene bags over product or package may be dangerous. To avoid danger of
suffocation, keep this wrapper away from babies and children. This bag is not
a toy.
DANGER: When the unit is used in a bathroom, unplug it after use
since the proximity of water presents a hazard even when the
appliance is switched off
WARNING: Do not use or leave the adaptor in a position where it can become wet
or there is a danger of it falling into a basin or other vessels containing water.
Keep the appliance dry, unless it otherwise specified. Do not use this appliance
in or near bathtubs, showers, basins or other vessels containing water.
- Do not immerse appliance in water or other liquids.
- Do not reach for an appliance that has fallen into water. Unplug immediately.
- Take care to avoid contact between the moving blades of the unit and the
skin, paying particular attention to the face, neck and hands.
- This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the
appliance.

SUPER CLIP XTP / TOOL TIPS
5
IMPORTANT: Always unplug the appliance when not in use or before cleaning.
Do not leave unattended when plugged in or switched on. Do not place on any
heat sensitive surface.
- Do not use any attachments other than those supplied by Conair Australia
Pty Ltd.
- Use this appliance only for its intended use as described within this
instruction booklet.
- Always unplug the appliance when fully charged.
- This appliance is not intended for commercial use.
- Never drop or insert any object into an opening.
- Do not use the appliance with damaged or broken attachment combs or with
any teeth missing from the blades, as injury may occur.
- Do not place on any surface while it is operating.
- Keep the cord away from heated surfaces
- Never twist or pull on the power cord.
- Do not use an extension cord with this appliance.
- After use do not wrap the cord around the appliance as in time this may cause
the cord to fracture. Coil cord loosely by the side of the appliance in storage.
- Do not use outdoors or operate where aerosol (spray) products are being
used or where oxygen is being administered.
- Do not use the appliance if it is damaged. In the event of damage, discontinue
use immediately and contact your dealer for instructions on returning it for
examination or exchange. If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly qualified person in order
to avoid a hazard.
- Always ensure that the voltage to be used corresponds to the voltage marked
on the unit.
- For additional protection, the installation of a residual current device
(RCD) with a rated operating current not exceeding 30mA is advisable in
the electrical current circuit supplying the bathroom. Ask your installer for
advice.

66
1. Diamond
sharpened moving
blade
2. Titanium moving
blade
3. Cord/cordless use
4. Li-ion power
5. 10x cutting comb
guides - grades #1
to #10 for cutting,
shaping & fading
6. Left + right ear
taper cutting comb
guides for the
finishing touches
around the ears
7. Fade comb guide
8. 5 position taper
control
9. Travel pouch
10. Barber comb
11. Scissors
12. Blade guard
13. Cleaning brush
14. Oil
15. Adapter
SUPER CLIP XTP
BRAVO. YOU’VE MADE A QUALITY PURCHASE.
The Super Clip XTP is the precision hair clipper
for professional, at-home hair cutting.
12
4
3
11
13
14
9
8
5
12
10
6
7
15
SUPER CLIP XTP / TOOL TIPS

SUPER CLIP XTP / TOOL TIPS
7
PREPPING YOUR
NEW TOOL
CHARGING
The Super Clip XTP is so easy to use. But before you start using your new tool,
you must take the time to charge it overnight for 3 hours before its first use.
Your new tool comes with a small amount of charge, but the initial charge will
ensure your new tool will have optimum power performance to give you smooth
fast cutting, every time.
- Before using for the first time, fully charge your new tool continuously for
3 hours.
- Maximum battery capacity will only be reached after 3 charging &
discharging cycles.
- Ensure your new tool is switched off.
- Insert the small plug on the charging adaptor into the socket on the bottom
of your new tool.
- Plug the charging adaptor into a suitable mains power socket and switch on.
- The red charging LED indicator light on your new tool will remain on when
correctly connected to the mains power.
- When the battery is fully charged, the LED indicator light will stop flashing,
but remain on.
- A full charge of 3 hours will supply 75 minutes cordless runtime.
- A quick charge of 15 minutes will supply 15 minutes cordless runtime.
- When the clipper is running low on charge, the LED indicator light will flash,
warning you there is approximately 3 minutes left of battery use remaining.
- lf the charging light suddenly starts to flash rapidly then the appliance is
faulty. lf this happens then plesae stop charging and remove the adaptor
from the mains and contact our customer care centre for further advise(see
the “warranty section” section of the information booklet).

SUPER CLIP XTP / TOOL TIPS
8
CORDED USE
To use the clipper connected to mains power:
• Ensure your new tool is switched off.
• Insert the small plug on the charging adaptor into the socket on the bottom
of your new tool.
• Plug the charging adaptor into a suitable mains power socket and switch on.
• The red LED charging light will flash when the adapter is correctly inserted
into the appliance and connected to an outlet
• Switch the clipper on – NOTE – if the battery is weak and low on battery
charge, wait approx. 1min before switching the clipper on.
NOTE: The clipper should not be used for longer than 20 minutes when operated
with the cord.

SUPER CLIP XTP / TOOL TIPS
9
HOW TO USE
SUPER CLIP XTP
OILING THE BLADES
To get the sharpest, most precise cut, it is highly recommended to oil the blades
before each use.
• Using the oil supplied with your new tool, unscrew the cap & cut off the very
end of the plastic tube with a pair of scissors to release the oil.
• Switch your tool on, gently squeeze the oil tube & apply 2 drops of oil onto
the blades. Leave the tool on for a further few seconds to allow the oil to
thoroughly spread across each of the blades. Switch off the tool & remove
any excess oil by gently dabbing with a cloth.
BEFORE USING
• Always inspect the clipper blades for noticeable signs of damage.
• Ensure the clipper blades are well oiled before using.
• Always inspect the clipper blades before use to ensure they are free from
hair, debris etc.
• Ensure the clipper is sufficiently charged before use.
• For best performance use on clean, dry hair that has been combed until
tangle-free.
5 POSITION TAPER CONTROL
The 5 position taper control for is designed for blending layers & a precise close
trim, everytime.
• To increase the cutting length, push the lever down.
• To reduce the cutting length, push the lever up.

SUPER CLIP XTP / TOOL TIPS
10
EASY CLIPPING, YOUR WAY
The Super Clip XTP features 10 cutting comb guides for cutting, shaping and
fading. It also comes with left and right ear taper cutting comb guides for the
finishing touches around the ears.
The comb guides are marked with the following grade number:
Cutting Length Grade
3mm #1
6mm #2
9.5mm #3
13mm #4
16mm #5
19mm #6
22mm #7
25mm #8
28mm #9
32mm #10
Ear taper Left
Ear taper Right
• To attach a comb guide, ensure the appliance is switched off. Position the
comb guide over the front of the clipper blade and slide over the head. Push
and click the rear of the comb guide into position.
• To remove the comb guide, ensure the appliance is switched off. Push the tab
on the rear of the comb guide away from the head and lift off.
• To attach the ear comb guides, choose either the left or right guide depending
on which ear you are cutting above. Angle the clipper and gently stroke
around the ear towards the back of the neck.

SUPER CLIP XTP / TOOL TIPS
11
PROFESSIONAL FADED RESULTS
The Super Clip XTP clipper features a new fade comb guide that effectively
blends lines for a perfect faded result compared to standard comb guides, for
professional barber style results at home.
To use, simply use a longer length comb guide to clip the top of the faded style,
then attach the fade comb guide for a more seamless faded look. Easy!
• To attach the fade comb guide, ensure the appliance is switched off. Position
the comb guide over the front of the clipper blade and slide over the head.
Push and click the rear of the comb guide into position.
• To remove the comb guide, ensure the appliance is switched off. Push the tab
on the rear of the comb guide away from the head and lift off.

SUPER CLIP XTP / TOOL TIPS
12
CLIPPING TIPS
Hit up www.vsformen.com.au for more grooming tips, inspiration & guidance on
how to get the best use of your clipper.
CREATING AN ALL-OVER EVEN CUT
1. Ensure the clipper is switched off.
2. Attach the desired cutting comb guide as required.
3. Switch the clipper on – the blades will start to move.
4. Start cutting at the nape of the neck, holding the clipper with the teeth of
the clipper pointing upwards, ensuring that the comb guide is resting flat
against the head.
5. Slowly move the clipper upwards and outwards through the hair towards your
crown, against the direction of the hair growth. The comb guide will help to
lift the hair and the blades will cut the hair to the length as shown on the
comb guide.
6. Once the desired length is achieved at the back of the hair, start clipping the
top and sides.
7. Hold the clipper to the front of your hair with the teeth pointing towards
the back of your head, and move the clipper towards your crown. Repeat as
necessary, moving in rows from the front and the sides of your head to the
back.
8. For finishing around the ears, attach the required ear taper comb guide and
trim down any longer hairs around the ears.

SUPER CLIP XTP / TOOL TIPS
13
CREATING A SHORT BACK & SIDES LOOK, WITH
LENGTH ON THE TOP
1. Ensure the clipper is switched off.
2. Attach the desired cutting comb guide as required.
3. Switch the clipper on – the blades will start to move.
4. Hold the clipper to the front of your hair with the teeth pointing towards
the back of your head and move the clipper towards your crown. Repeat as
necessary, moving in rows from the front and the sides of your head to the
back.
5. If you then wish to take the back and sides of your hair to a shorter length,
switch off the appliance and attach a shorter comb guide.
6. Start cutting at the nape of the neck, and with the comb guide flat against
the head, move the clipper upwards and outwards over the area you want to
take shorter.
7. Repeat on the sides of the hair, starting with the teeth of the clipper pointing
upwards and comb guide flat against the area above the ear, again moving
the clipper upwards and outwards.
OUTLINING
1. To tidy up the edges around your cut e.g. neckline and sideburns, detach the
comb guides.
2. Hold the clipper upside down, so the front of the clipper is facing towards
your head.
3. Hold the clipper straight on your sideburns or neckline and move the clipper
downwards. This will give you a clean, smooth finish.

SUPER CLIP XTP / TOOL TIPS
14
CLIPPER CLEANING &
MAINTENANCE
Because the clipper blades are precision made for a very special use, they
should always be handled with care. To ensure long-lasting performance of your
clipper, it is important to clean the blades + the comb guides after every use.
After each use, clean the clipper blade set as follows:
1. Switch the clipper off or unplug from the power outlet if it is charging.
2. Using the cleaning brush, gently brush and blow any hairs from the blade set
and head of your clipper.
3. Remove the blades carefully noting which way round they are fitted. This will
help with re-assembling.
4. Remove the two screws from the large fixed blade and detach this blade.
5. Now brush away the hair and other debris from the interior of the cutting
head and blades.
6. Re-assembly is simply the reverse of the above instructions.
7. Finally, before fully tightening the two screws in the large blade, to avoid
injury ensure that the blades are correctly aligned. With the taper control
lever fully forward, the tips of the small blade must be parallel with and
1mm below the tips of the large blade. Also check that the extreme left hand
tooth of the small blade is inside the large blade. (Failure to do so could
cause injury).
8. Carefully tighten the two screws in the big blade, taking care not to disturb
the above correct position of the blades
9. After replacing the blade set, always remember to oil the blade of your
clipper.
NOTE: Do not attempt to repair or replace the blades. In the event that the blades
become blunt or damaged, contact the Conair Customer Service.
Replacement blades can be purchased from Conair Customer Service.

SUPER CLIP XTP / TOOL TIPS
15
WORLDWIDE VOLTAGE
This appliance has a multi voltage feature for worldwide use. The voltage
automatically converts for ease of use from 100v - 240v. This appliance has an
automatic internal converter which will automatically convert the voltage without
the need of a switch. A suitable plug adaptor will be required, please refer to the
chart below.
Plug adaptor
required
Voltage and
plug adaptors
Country Voltage
setting
British plug:
240V
Ireland, Great Britain, Singapore, South America,
Hong Kong (parts only), Africa (parts only)
240V
European plug:
240V
Asia, Europe, Middle East Noumea, Scandinavia,
South America, Hong Kong (parts only)
240V
Australian and
New Zealand
plug: 240V
Australia, New Zealand 240V
American
plugs: 120V
North America, Japan, Canada
(parts of)
120V

SUPER CLIP XTP / TOOL TIPS
16
BATTERY DISPOSAL
The Super Clip XTP contains a Lithium-ion battery. To protect the environment, the
appliance must be disposed of safely at the end of its useful life.
Please take the appliance to a recycling centre, where the internal
rechargeable battery should be removed by a professional and
recycled separately.
For more information about the recycling of electrical and battery operated
appliances, please contact your local council office or your household waste
disposal service.
LI-ION

SUPER CLIP XTP / TOOL TIPS
17
LIMITED THREE
YEAR WARRANTY
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure
and for compensation for any other reasonably foreseeable loss or damage. You
are also entitled to have the goods repaired or replaced if the goods fail to be
of acceptable quality and the failure does not amount to a major failure. In New
Zealand our goods come with a guarantee that cannot be excluded under the
Consumer Guarantee Act 1993.
Conair Australia Pty Ltd. will repair or replace (at our option) your appliance free
of charge for thirty-six months from the date of purchase if the appliance is
defective in workmanship or materials.
This warranty is an additional benefit and does not affect your legal rights. To
obtain service under this warranty, please read the Warranty Leaflet included or
contact Conair Customer Service at [e-mail].
TO MAKE A WARRANTY CLAIM YOU MUST
RETAIN YOUR PROOF OF PURCHASE.

SUPER CLIP XTP / TOOL TIPS
18

Vidal Sassoon and related logos are trademarks of
The Procter & Gamble Company used under license by Conair.
©2017 Conair Australia Pty. Ltd.
Suite 101, 18 Rodborough Rd
Frenchs Forest NSW 2086
Australia
Conair New Zealand Limited
PO BOX 251159
Pakuranga, Auckland 1706
New Zealand
CONTACT US
For advice & tips on your new VS product email us on:
aus_inf[email protected]
CUSTOMER SERVICE
Australia: 1800 650 263
New Zealand: 0800 266 247
Visit VSFORMEN.COM.AU for grooming tips & inspiration.

SUPER CLIP XTP / TOOL TIPS
20
YOU WERE
BORN TO
BE REAL,
NOT TO BE
PERFECT
IB-17/268