Conair Infiniti Hair Designer 208RC User guide

TM
MC
TM
MC
Instruction & Styling Guide
Model 208RC
STRAIGHTENS • SHINES• CONTROLS FRIZZ• HEALTHY HAIR • VOLUME

KNOW EVERYTHING ABOUT THE HAIR DESIGNER™BY CONAIR®
KNOW EVERYTHING ABOUT THE HAIR DESIGNER™BY CONAIR®
IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, especially when children are present, basic safety precautions should always be
followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING
KEEP AWAY FROM WATER
DANGER – Any hair dryer is electrically live even when the switch is off. To reduce the risk of death or injury
by electric shock:
1. Always unplug appliance immediately after using.
2. Do not use while bathing or in a shower.
3. Do not place or store appliance where it can fall or be pulled into a tub or sink.
4. Do not place in, or drop into, water or other liquid.
5. If an appliance falls into water, unplug it immediately. Do not reach into the water.
WARNING –To reduce the risk of burns, electrocution, fire, or injury to persons:
1. This appliance should never be left unattended when plugged in.
2. This appliance should not be used by, on, or near children or by individuals with certain disabilities.
3. Use this appliance only for its intended use as described in this manual. Do not use attachments not
recommended by the manufacturer.
4. Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has
been dropped, damaged, or dropped into water. Return the appliance to a Conair service centre for
examination and repair.
5. Keep the cord away from heated surfaces. Do not pull, twist, or wrap line cord around dryer, even during
storage.
6. Never block the air openings of the appliance or place it on a soft surface, such as a bed or couch, where the air
openings may be blocked. Keep the air openings free of lint, hair, and the like.
7. Never use while sleeping.
8. Never drop or insert any object into any opening or hose.
9. Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being
administered.

KNOW EVERYTHING ABOUT THE HAIR DESIGNER™BY CONAIR®
KNOW EVERYTHING ABOUT THE HAIR DESIGNER™BY CONAIR®
IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, especially when children are present, basic safety precautions should always be
followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING
KEEP AWAY FROM WATER
DANGER – Any hair dryer is electrically live even when the switch is off. To reduce the risk of death or injury
by electric shock:
1. Always unplug appliance immediately after using.
2. Do not use while bathing or in a shower.
3. Do not place or store appliance where it can fall or be pulled into a tub or sink.
4. Do not place in, or drop into, water or other liquid.
5. If an appliance falls into water, unplug it immediately. Do not reach into the water.
WARNING –To reduce the risk of burns, electrocution, fire, or injury to persons:
1. This appliance should never be left unattended when plugged in.
2. This appliance should not be used by, on, or near children or by individuals with certain disabilities.
3. Use this appliance only for its intended use as described in this manual. Do not use attachments not
recommended by the manufacturer.
4. Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has
been dropped, damaged, or dropped into water. Return the appliance to a Conair service centre for
examination and repair.
5. Keep the cord away from heated surfaces. Do not pull, twist, or wrap line cord around dryer, even during
storage.
6. Never block the air openings of the appliance or place it on a soft surface, such as a bed or couch, where the air
openings may be blocked. Keep the air openings free of lint, hair, and the like.
7. Never use while sleeping.
8. Never drop or insert any object into any opening or hose.
9. Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being
administered.

KNOW EVERYTHING ABOUT THE HAIR DESIGNER™BY CONAIR®
KNOW EVERYTHING ABOUT THE HAIR DESIGNER™BY CONAIR®
10. Do not use an extension cord to operate dryer.
11. Do not direct hot air toward eyes or other heat-sensitive areas.
12. Attachments may be hot during use. Allow them to cool before handling.
13. Do not place appliance on any surface while it is operating.
14. While using the appliance, keep your hair out of it. Keep your hair away from the air inlets.
15. Do not use with voltage converter.
SAVE THESE INSTRUCTIONS
OPERATING INSTRUCTIONS
This appliance is intended for household use only. Use on Alternating Current (60 hertz) only. Standard Dryers are
designed to operate at 110 to 125 volts A.C.
This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit in a
polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician. Do not attempt to defeat this safety feature.
IMPORTANT – 1875 WATT OPERATING GUIDE
Use of this dryer on the same circuit or fuse with other electrical products or appliances may trip a 15 amp circuit
breaker or blow a 15 amp fuse. NEVER replace the fuse with one rated higher than the capacity of the circuit.
Doing so could result in an electrical fire.
SUPER STYLING GUIDE
Your best looks begin with a good haircut that’s well maintained. Always treat hair right with superior quality
shampoos, conditioners, and finishing products.
The Hair Designer™by Conair®is an innovative, revolutionary styler that has effectively eliminated the hair brush and
brought salon quality results to your home.

KNOW EVERYTHING ABOUT THE HAIR DESIGNER™BY CONAIR®
KNOW EVERYTHING ABOUT THE HAIR DESIGNER™BY CONAIR®
10. Do not use an extension cord to operate dryer.
11. Do not direct hot air toward eyes or other heat-sensitive areas.
12. Attachments may be hot during use. Allow them to cool before handling.
13. Do not place appliance on any surface while it is operating.
14. While using the appliance, keep your hair out of it. Keep your hair away from the air inlets.
15. Do not use with voltage converter.
SAVE THESE INSTRUCTIONS
OPERATING INSTRUCTIONS
This appliance is intended for household use only. Use on Alternating Current (60 hertz) only. Standard Dryers are
designed to operate at 110 to 125 volts A.C.
This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit in a
polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician. Do not attempt to defeat this safety feature.
IMPORTANT – 1875 WATT OPERATING GUIDE
Use of this dryer on the same circuit or fuse with other electrical products or appliances may trip a 15 amp circuit
breaker or blow a 15 amp fuse. NEVER replace the fuse with one rated higher than the capacity of the circuit.
Doing so could result in an electrical fire.
SUPER STYLING GUIDE
Your best looks begin with a good haircut that’s well maintained. Always treat hair right with superior quality
shampoos, conditioners, and finishing products.
The Hair Designer™by Conair®is an innovative, revolutionary styler that has effectively eliminated the hair brush and
brought salon quality results to your home.

KNOW EVERYTHING ABOUT THE HAIR DESIGNER™BY CONAIR®
KNOW EVERYTHING ABOUT THE HAIR DESIGNER™BY CONAIR®
DRYING BASICS
1. Shampoo and condition hair with products of your choice. Rinse thoroughly. Towel dry hair to remove excess
moisture. Using the dryer, start at a lower setting and direct hot air through a section of hair at a time. Move dryer
steadily across each section so that the hot air passes through hair. Direct air flow at hair not scalp. Clouds of
negatively charged ions will help to reduce static electricity, control frizzy flyaways and contribute to your hair’s
shine.
2. Keep dryer’s air intake vents unobstructed and free from hair while drying.
3. To avoid over drying, do not concentrate heat on any one section for any extended length of time. Keep dryer
moving as you style.
4. For quick touch ups, between shampoos, dampen hair with a mist of water before styling with the dryer.
5. When using your dryer to create curls and waves, dry hair almost completely on the high temperature setting,
then finish styling with Cool Shot feature to close hair shaft and lock in style.
The professional Hair Designer™by Conair®is very effective, even at lower temperatures, and helps to give
healthier-looking, shiny more manageable hair with maximum styling control.
BODY & VOLUME
To create extra volume, turn head upside down while drying. Position the air flow toward
the roots for maximum lift. When hair is dry, toss head back and brush hair into place.
STRAIGHTENING
Work with hair in sections when creating a super straight look. Using the patent-pending Tourmaline
Ceramic™Straightening attachment, select a small section of hair and pass through each section to
smooth out curls and help control frizz. (See "How To Straighten Your Hair" section.)
MAKING WAVES
Tousled, natural-looking waves are easily created by grasping hair at the roots and scrunching between
fingertips while drying.

KNOW EVERYTHING ABOUT THE HAIR DESIGNER™BY CONAIR®
KNOW EVERYTHING ABOUT THE HAIR DESIGNER™BY CONAIR®
DRYING BASICS
1. Shampoo and condition hair with products of your choice. Rinse thoroughly. Towel dry hair to remove excess
moisture. Using the dryer, start at a lower setting and direct hot air through a section of hair at a time. Move dryer
steadily across each section so that the hot air passes through hair. Direct air flow at hair not scalp. Clouds of
negatively charged ions will help to reduce static electricity, control frizzy flyaways and contribute to your hair’s
shine.
2. Keep dryer’s air intake vents unobstructed and free from hair while drying.
3. To avoid over drying, do not concentrate heat on any one section for any extended length of time. Keep dryer
moving as you style.
4. For quick touch ups, between shampoos, dampen hair with a mist of water before styling with the dryer.
5. When using your dryer to create curls and waves, dry hair almost completely on the high temperature setting,
then finish styling with Cool Shot feature to close hair shaft and lock in style.
The professional Hair Designer™by Conair®is very effective, even at lower temperatures, and helps to give
healthier-looking, shiny more manageable hair with maximum styling control.
BODY & VOLUME
To create extra volume, turn head upside down while drying. Position the air flow toward
the roots for maximum lift. When hair is dry, toss head back and brush hair into place.
STRAIGHTENING
Work with hair in sections when creating a super straight look. Using the patent-pending Tourmaline
Ceramic™Straightening attachment, select a small section of hair and pass through each section to
smooth out curls and help control frizz. (See "How To Straighten Your Hair" section.)
MAKING WAVES
Tousled, natural-looking waves are easily created by grasping hair at the roots and scrunching between
fingertips while drying.

KNOW EVERYTHING ABOUT THE HAIR DESIGNER™BY CONAIR®
KNOW EVERYTHING ABOUT THE HAIR DESIGNER™BY CONAIR®
DRYER FEATURES:
1. Exceptional Power
Equipped with a powerful motor (1875 Watts) this hairdryer gives penetrating and quick drying results.
2. Tourmaline CeramicTM Technology
Ion output helps smooth the cuticle layer creating silky, shiny hair.
3. Ceramic Disk and Ionic Technology
Controls static electricity and also enhances the effectiveness of leave-in hair care. It facilitates your styling and
optimizes your hair’s shine and softness. It will be easier to style and shape your hair.
4. Unique Tourmaline Ceramic™straightening attachment with tension control
One easy step straightening process. Dry, detangle, straighten and shine hair for professional results.
5. A Professional Concentrator Nozzle
Ultra-slim, this concentrator guarantees optimal precision in styling your hair.
6. A Professional Diffuser
For curls and volume.
7. Release Lock Buttons
Secure attachments into place and allow 360° rotation to use the right angle for styling.
8. Automatic Temperature Control
Automatically recognizes the attachment used and adjusts the temperature and airflow for perfect
straightening or drying.
9. 2 Temperature Settings
Low Setting: this position combines ideal air flow and temperature setting for shaping finer, damaged or
treated hair.
High Setting: combines stronger airflow with higher temperature, especially recommended for pre-drying and
also for styling and straightening thick hair.
10. The ‘cool shot’ button
A shot of cool air at the end of straightening sets the style for a ‘long-lasting’ effect.

KNOW EVERYTHING ABOUT THE HAIR DESIGNER™BY CONAIR®
KNOW EVERYTHING ABOUT THE HAIR DESIGNER™BY CONAIR®
DRYER FEATURES:
1. Exceptional Power
Equipped with a powerful motor (1875 Watts) this hairdryer gives penetrating and quick drying results.
2. Tourmaline CeramicTM Technology
Ion output helps smooth the cuticle layer creating silky, shiny hair.
3. Ceramic Disk and Ionic Technology
Controls static electricity and also enhances the effectiveness of leave-in hair care. It facilitates your styling and
optimizes your hair’s shine and softness. It will be easier to style and shape your hair.
4. Unique Tourmaline Ceramic™straightening attachment with tension control
One easy step straightening process. Dry, detangle, straighten and shine hair for professional results.
5. A Professional Concentrator Nozzle
Ultra-slim, this concentrator guarantees optimal precision in styling your hair.
6. A Professional Diffuser
For curls and volume.
7. Release Lock Buttons
Secure attachments into place and allow 360° rotation to use the right angle for styling.
8. Automatic Temperature Control
Automatically recognizes the attachment used and adjusts the temperature and airflow for perfect
straightening or drying.
9. 2 Temperature Settings
Low Setting: this position combines ideal air flow and temperature setting for shaping finer, damaged or
treated hair.
High Setting: combines stronger airflow with higher temperature, especially recommended for pre-drying and
also for styling and straightening thick hair.
10. The ‘cool shot’ button
A shot of cool air at the end of straightening sets the style for a ‘long-lasting’ effect.

A.
B.
C.
D
e
t
a
n
g
l
e
,
S
t
r
a
i
g
h
t
e
n
,
S
h
i
n
e
T
r
i
p
l
e
A
c
t
i
o
n
KNOW EVERYTHING ABOUT THE HAIR DESIGNER™BY CONAIR®
KNOW EVERYTHING ABOUT THE HAIR DESIGNER™BY CONAIR®
STRAIGHTENER ATTACHMENT FEATURES
1. A patent-pending triple-action
straightening attachment:
A. The Detangling comb guides your hair
for straightening.
B. Tourmaline Ceramic™straightening plates gently
straightens and conditions the hair.
C. Flocked disks add shine.
2. Rotating Position
To rotate positions of the attachment, press the two attachment release lock buttons on
the sides to the barrel of the hair dryer and adjust accordingly. Do not rotate attachments
without using release lock buttons as it could cause damage.
Flocked disks add shine
Tourmaline Ceramic™
straightening plates
Detangling comb
Tension control system: 4 positions 1. Wavy hair
2. Curly hair 3. Very curly hair 4. Thick hair
Cool shot
button
2 speed/temperature
(High/Low) settings
Release lock buttons for attachments
Tourmaline Ceramic™grill,
Ceramic Disk and Ionic Technology
Hinged air filter
Professional length cord
Controls frizz,
straightens and shines
Professional
Concentrator
Professional
Diffuser
1875 watts
DRY, DETANGLE, STRAIGHTEN AND SHINE IN ONE STEP

A.
B.
C.
D
e
t
a
n
g
l
e
,
S
t
r
a
i
g
h
t
e
n
,
S
h
i
n
e
T
r
i
p
l
e
A
c
t
i
o
n
KNOW EVERYTHING ABOUT THE HAIR DESIGNER™BY CONAIR®
KNOW EVERYTHING ABOUT THE HAIR DESIGNER™BY CONAIR®
STRAIGHTENER ATTACHMENT FEATURES
1. A patent-pending triple-action
straightening attachment:
A. The Detangling comb guides your hair
for straightening.
B. Tourmaline Ceramic™straightening plates gently
straightens and conditions the hair.
C. Flocked disks add shine.
2. Rotating Position
To rotate positions of the attachment, press the two attachment release lock buttons on
the sides to the barrel of the hair dryer and adjust accordingly. Do not rotate attachments
without using release lock buttons as it could cause damage.
Flocked disks add shine
Tourmaline Ceramic™
straightening plates
Detangling comb
Tension control system: 4 positions 1. Wavy hair
2. Curly hair 3. Very curly hair 4. Thick hair
Cool shot
button
2 speed/temperature
(High/Low) settings
Release lock buttons for attachments
Tourmaline Ceramic™grill,
Ceramic Disk and Ionic Technology
Hinged air filter
Professional length cord
Controls frizz,
straightens and shines
Professional
Concentrator
Professional
Diffuser
1875 watts
DRY, DETANGLE, STRAIGHTEN AND SHINE IN ONE STEP

Wavy Hair Curly Hair Very Curly Hair Thick HairTension
Control Dial
Horizontal VerticalDiagonal
1.
KNOW EVERYTHING ABOUT THE HAIR DESIGNER™BY CONAIR®
KNOW EVERYTHING ABOUT THE HAIR DESIGNER™BY CONAIR®
3. Tension Control System
There are 4 fundamental kinds of hair: wavy, curly, very curly, and thick. This unique
tension control system on the straightener attachment has been developed to feature 4
settings for every hair type. Its expertise lets it give The Hair Designer™by Conair®
unrivalled performance thanks to this unique Tension Control System. This patent-pend-
ing technology allows you to adjust the tension setting to suit each hair type for perfect
salon quality straightening results.
4. Exclusive 360° rotating head
This exclusive system makes the appliance exceptionally comfortable to use. Now you can easily
style both the right and left sides, as well as hard to reach areas such as the back of your head.
Straightening very long hair, giving your bangs and roots body or flipping the ends now becomes
simplified in one easy step.
STEP-BY-STEP STRAIGHTENING
PUTTING ON AND REMOVING THE ATTACHMENTS
1. Snap the straightener or concentrator attachment onto the barrel and rotate to lock into desired
position. There are 8 different locking positions.

Wavy Hair Curly Hair Very Curly Hair Thick HairTension
Control Dial
Horizontal VerticalDiagonal
1.
KNOW EVERYTHING ABOUT THE HAIR DESIGNER™BY CONAIR®
KNOW EVERYTHING ABOUT THE HAIR DESIGNER™BY CONAIR®
3. Tension Control System
There are 4 fundamental kinds of hair: wavy, curly, very curly, and thick. This unique
tension control system on the straightener attachment has been developed to feature 4
settings for every hair type. Its expertise lets it give The Hair Designer™by Conair®
unrivalled performance thanks to this unique Tension Control System. This patent-pend-
ing technology allows you to adjust the tension setting to suit each hair type for perfect
salon quality straightening results.
4. Exclusive 360° rotating head
This exclusive system makes the appliance exceptionally comfortable to use. Now you can easily
style both the right and left sides, as well as hard to reach areas such as the back of your head.
Straightening very long hair, giving your bangs and roots body or flipping the ends now becomes
simplified in one easy step.
STEP-BY-STEP STRAIGHTENING
PUTTING ON AND REMOVING THE ATTACHMENTS
1. Snap the straightener or concentrator attachment onto the barrel and rotate to lock into desired
position. There are 8 different locking positions.

A.
B.
2.
KNOW EVERYTHING ABOUT THE HAIR DESIGNER™BY CONAIR®
KNOW EVERYTHING ABOUT THE HAIR DESIGNER™BY CONAIR®
2. To remove the attachment press the 2 attachment release buttons on the sides of the appliance
while gently removing the attachment.
3. Also use the release buttons when adjusting attachment angles.
HOW TO STRAIGHTEN YOUR HAIR
PREPARING YOUR HAIR
1. Carefully wash and comb out your hair.
Expert’s advice: Always start combing wet hair at the ends then slowly work your way
up towards the roots. Gentle combing prevents split ends from forming.
2. Towel dry your hair and pre dry using the Hair DesignerTM set at the high setting, using the
concentrator if necessary. For best results, towel dry and ensure hair is not soaking wet before
using the straightening attachment.
Expert’s Advice: A: Whatever type of hair you have, start the pre-drying process by bending
at the waist, allowing your hair to fall forward to better lift the roots and give your style
volume. B: If, however, you prefer less volume, stand with your head straight to pre-dry
your hair.
GETTING THE DRYER READY
1. Attach the straightener attachment.
2. Select the tension setting recommended for your hair type using the Tension Control Dial located
on the side of the straightener attachment. Expert's advice: The first time you use the
attachment, set it at tension 4 (strongest tension) to familiarize yourself with the Infiniti Hair
Designer™
. Gradually decrease the tension setting until you find the best setting for your
hair.
3. For best results, use the appliance set at high setting (Speed/temperature).
4. Using the release lock buttons set attachment at desired angle for professional, salon styling results.
Use CAUTION when changing settings while in use as straightening attachment tension control dial may be hot.
HAIR DESIGNER™STRAIGHTENING TRIPLE ACTION STYLING PRINCIPLE
The patent-pending straightener attachment dries, straightens and shines your hair in just
one step. The unique principle integrates the 3 essential steps for perfect straightening results:
1. A detangling comb distributes your hair among the centre Tourmaline Ceramic™straightening plates.

A.
B.
2.
KNOW EVERYTHING ABOUT THE HAIR DESIGNER™BY CONAIR®
KNOW EVERYTHING ABOUT THE HAIR DESIGNER™BY CONAIR®
2. To remove the attachment press the 2 attachment release buttons on the sides of the appliance
while gently removing the attachment.
3. Also use the release buttons when adjusting attachment angles.
HOW TO STRAIGHTEN YOUR HAIR
PREPARING YOUR HAIR
1. Carefully wash and comb out your hair.
Expert’s advice: Always start combing wet hair at the ends then slowly work your way
up towards the roots. Gentle combing prevents split ends from forming.
2. Towel dry your hair and pre dry using the Hair DesignerTM set at the high setting, using the
concentrator if necessary. For best results, towel dry and ensure hair is not soaking wet before
using the straightening attachment.
Expert’s Advice: A: Whatever type of hair you have, start the pre-drying process by bending
at the waist, allowing your hair to fall forward to better lift the roots and give your style
volume. B: If, however, you prefer less volume, stand with your head straight to pre-dry
your hair.
GETTING THE DRYER READY
1. Attach the straightener attachment.
2. Select the tension setting recommended for your hair type using the Tension Control Dial located
on the side of the straightener attachment. Expert's advice: The first time you use the
attachment, set it at tension 4 (strongest tension) to familiarize yourself with the Infiniti Hair
Designer™
. Gradually decrease the tension setting until you find the best setting for your
hair.
3. For best results, use the appliance set at high setting (Speed/temperature).
4. Using the release lock buttons set attachment at desired angle for professional, salon styling results.
Use CAUTION when changing settings while in use as straightening attachment tension control dial may be hot.
HAIR DESIGNER™STRAIGHTENING TRIPLE ACTION STYLING PRINCIPLE
The patent-pending straightener attachment dries, straightens and shines your hair in just
one step. The unique principle integrates the 3 essential steps for perfect straightening results:
1. A detangling comb distributes your hair among the centre Tourmaline Ceramic™straightening plates.

1.
2.
3.
KNOW EVERYTHING ABOUT THE HAIR DESIGNER™BY CONAIR®
KNOW EVERYTHING ABOUT THE HAIR DESIGNER™BY CONAIR®
2. Each Tourmaline Ceramic™centre plate is then able to straighten efficiently using tension
to smooth out curls, eliminate static and control frizz.
3. The straightened hair is then given a shiny, polished finish as it passes through the flocked
disks.
HOW TO USE THE 360OROTATING HEAD ATTACHMENT
To carry out the 3 steps effectively, the straightener attachment rotates 360ointo 8 different
positions. To change the position, press the 2 attachment release lock buttons on each side of
the barrel, turn the attachment, and then release the buttons rotating the attachment until it ‘clicks’ into place. Do
not force rotation without using attachment release lock buttons.
Expert’s Advice: Ideally, the teeth of the detangling comb should be positioned facing down and used on the hair
first: by using this position hair gets detangled, is straightened and then shined for a silky, smooth, salon finish.
STYLING TIPS
Work in stages.
1. Section hair and clip-up the upper layers of hair on top of your head to begin with the hair
underneath and at the nape of the neck.
2. Move on to the hair at the back of your head and then on the sides.
3. Finish with the upper layers of hair. For best results, hold ends of selected strand to keep
hair taut while straightening. For straighter, sleeker strands slowly pass dryer with straightener
attachment through each strand. This concentrates heat and tourmaline, ceramic, ionic
technology on selected hair strand smoothing away curls and controlling frizz. For more volume, glide
dryer with straightener attachment more quickly through each strand.
Expert’s Advice: Smooth or volume straightening? To reduce the volume of thick or
voluminous hair, position the Hair Designer™on top of the section of hair. If you want
more volume, place the Hair Designer™underneath the section of hair to straighten
while lifting the roots for added volume.

KNOW EVERYTHING ABOUT THE HAIR DESIGNER™BY CONAIR®
KNOW EVERYTHING ABOUT THE HAIR DESIGNER™BY CONAIR®
CURLING THE ENDS OF YOUR HAIR
Curl Under Flip
1. Select the horizontal position for the straightener attachment.
2. Separate a section of hair about 1½" wide. Place the dryer (detangling teeth facing down)
under the section of hair.
3. With a slight twisting motion of the wrist, turn the appliance under and slide it slowly
towards the ends, using your free hand if necessary to turn the hair up.
4. Hold it for 5 to 10 seconds: this will give the action of the Tourmaline Ceramic™and flocked
disks maximum effect.
5. Repeat if necessary and finish with a shot of cool air on the section of hair for perfect hold.
LONG/SHOULDER LENGTH HAIR
1. Select the horizontal position for the straightener attachment.
2. Separate a section of hair about 1½" wide. Place the dryer (detangling comb facing down) at the
roots ensuring that the teeth of the detangling comb penetrate hair fully.
3. Hold ends of hair strand while straightening to keep hair taut and create tension for best results.
4. With a slight twisting motion of the wrist, turn the appliance under and slide it slowly down
the length of your hair to smooth out curls underneath strand.
5. Repeat if necessary until strand reaches the desired level of smoothness. Finish with a cool
air shot to set style.
6. For smoother hair, concentrate heat and tourmaline, ceramic, ionic technology by slowly
straightening each strand. With this new technology, results will still be faster and easier than
using a traditional brush.

1.
2.
3.
KNOW EVERYTHING ABOUT THE HAIR DESIGNER™BY CONAIR®
KNOW EVERYTHING ABOUT THE HAIR DESIGNER™BY CONAIR®
2. Each Tourmaline Ceramic™centre plate is then able to straighten efficiently using tension
to smooth out curls, eliminate static and control frizz.
3. The straightened hair is then given a shiny, polished finish as it passes through the flocked
disks.
HOW TO USE THE 360OROTATING HEAD ATTACHMENT
To carry out the 3 steps effectively, the straightener attachment rotates 360ointo 8 different
positions. To change the position, press the 2 attachment release lock buttons on each side of
the barrel, turn the attachment, and then release the buttons rotating the attachment until it ‘clicks’ into place. Do
not force rotation without using attachment release lock buttons.
Expert’s Advice: Ideally, the teeth of the detangling comb should be positioned facing down and used on the hair
first: by using this position hair gets detangled, is straightened and then shined for a silky, smooth, salon finish.
STYLING TIPS
Work in stages.
1. Section hair and clip-up the upper layers of hair on top of your head to begin with the hair
underneath and at the nape of the neck.
2. Move on to the hair at the back of your head and then on the sides.
3. Finish with the upper layers of hair. For best results, hold ends of selected strand to keep
hair taut while straightening. For straighter, sleeker strands slowly pass dryer with straightener
attachment through each strand. This concentrates heat and tourmaline, ceramic, ionic
technology on selected hair strand smoothing away curls and controlling frizz. For more volume, glide
dryer with straightener attachment more quickly through each strand.
Expert’s Advice: Smooth or volume straightening? To reduce the volume of thick or
voluminous hair, position the Hair Designer™on top of the section of hair. If you want
more volume, place the Hair Designer™underneath the section of hair to straighten
while lifting the roots for added volume.

KNOW EVERYTHING ABOUT THE HAIR DESIGNER™BY CONAIR®
KNOW EVERYTHING ABOUT THE HAIR DESIGNER™BY CONAIR®
BANGS
Curved bangs
1. Select the vertical position for the straightener attachment.
2. Separate a section of hair about 1½" wide. Place dryer
(detangling comb facing out) under the section of hair.
3. With a slight twisting motion of the wrist, turn the appliance upward
to lift the roots and slide it slowly over the ends.
4. Hold for 5 to 10 seconds: the Tourmaline Ceramic™and flocked disks work best this way.
5. Repeat if necessary and finish with a shot of cool air on the section of hair for perfect hold.
Straight bangs
1. Select the vertical position for the straightener attachment.
2. Separate a section of hair about 1½" wide. Place dryer (detangling comb facing down) over the section of hair.
3. With a slight twisting motion of the wrist, turn the appliance down and slowly slide it over the ends.
4. Repeat if necessary and finish with a shot of cool air on the section of hair for perfect hold.

KNOW EVERYTHING ABOUT THE HAIR DESIGNER™BY CONAIR®
KNOW EVERYTHING ABOUT THE HAIR DESIGNER™BY CONAIR®
This message about...
GROUND
FAULT
CIRCUIT
INTERRUPTERS ...can save a life!
FINISHING WITH THE CONCENTRATOR
Once the straightening process is finished, set your style with a shot of ionic cool air to eliminate all
traces of static electricity
1. Detach the straightener attachment by pressing the 2 attachment release lock buttons on each
side of the barrel and gently remove attachment.
2. ‘Click’ the concentrator attachment into position on the appliance. Using the attachment release
lock buttons, you can position the concentrator to desired angle for maximum styling control.
3. Turn on the Hair Designer™, set in low heat/speed setting position.
4. Press the cool-air button, aiming the airflow at the top of your head first and working down the
hair. This will set your style for lasting effect.
IF YOU MUST USE YOUR HAIR DRYER IN THE BATHROOM, INSTALL A GFCI* NOW!
Your local electrician can help you decide which type is best for you—a portable unit that plugs into
the electrical outlet or a permanent unit installed by your electrician. The National Electrical Code
now requires GFCI’s in the bathrooms, garages, and outdoor outlets of all new homes.