Conbrov T19 User manual

Conbrov T19 Keychain Mini Spy Camera
User Manual
Model No.: T19

Table of Contents
Part 1 Before First Use ..........................................1-2
Part 2 Quick Guide ...................................................3
Part 3 Detailed User Manual ...............................4-19
Part 3 Detailed User Manual
Safety Precautions ....................................................4
Warning on Invasion of Privacy ...................................5
What’s Included ........................................................6
T19 Diagram ............................................................ 7
Before Using Your Conbrov T19 Camera ................. 8-11
How to Use Your Conbrov T19 Camera ................. 12-14
1. Turn on the Camera /Record a Video ....................12
2.How to Turn On/Off Motion Detection Recording... 13
3. How to Switch into Night Vision ............................ 14
4. How to Play the Video ......................................... 14
Other Tips ...............................................................15
How to Reset the Camera.......... ..............................15
LED Status ..............................................................16
Technical Specifications ...........................................17
FAQs ......................................................................18
Warranty ................................................................ 19
Disposal .................................................................19
Declaration of Conformity .........................................19

1
Charging the camera
Before the first use, charge the camera via your PC or
USB charger (Power adapter should be no more than
5V/1A).
Formatting the microSD
Before the first use, format the microSD to FAT32 format.
And insert the microSD before use. The camera support
up to 32GB card capacity.
Part 1 Before First Use

2
Resetting the camera
If the camera malfunctions for any reason, reset it with
the included pin. A small paperclip can also be used.
Part 1 Before First Use

3
Part 2 Quick Guide
A.Install the microSD Card
ON lights flash blue 3
times and then turn off ,
the camera is in video
recording standby mode.
USB 2 .0
1
2
B.Turn on/Record a video
C.Save a Video/Turn off D.Play the Video
For more detailed information, see Part 3: Detailed User
Manual.
OFF lights flash
alternating red and
blue and then turn
off.

4
Safety Precautions
• Read this instruction manual carefully before using the
camera. It contains important information for your safety
as well as operating and maintenance instructions.
•F ollow all safety precautions in order to prevent damage
due to improper use of the camera.
•K eep this user manual carefully for future use. Should
this camera be passed along to a third party, this user
manual must be handed on as well.
•U se the camera only for its intended purpose.
•I n the event of improper use or erroneous handling, no
liability can be assumed for any possible damage which
may occur.
•N ever try to repair the camera yourself. Only allow
qualified personnel to repair the camera in the event of
malfunctions.
•W arning! Never immerse the camera in water or other
liquids while cleaning or operating it. Never hold the
product under running water.
•D o not open the housing under any circumstances. Do
not introduce any metal objects into the interior of the
housing.
•N ever use accessories which are not recommended by
the manufacturer.
•K eep the camera away from all hot surfaces and naked
flames. Protect the camera from extreme heat and cold,
dust, direct sunlight, humidity and drops or jets of water.
•D o not place any heavy objects on the camera.
The manufacturer is not responsible for any missing video
data due to maloperation, microSD card malfunctions,
camera angle limitation, etc.

5
Warning on Invasion of Privacy
The camera should be used for legal purpose only. Follow
the laws of your country.Recording and circulating an
image of an individual may constitute an infringement of
their privacy for which you could be liable. Ask for
authorization before filming individuals, particularly if you
want to keep your recordings and/or circulate images on
the Internet or any other medium. Do not circulate a
degrading image or one which could undermine the
reputation or dignity of an individual.

6
What's Included
Camera User Manual USB Cable
Card Reader Pin
Conbrov T19 Car Key Mini Spy Ca mera
User Manual
Model No.: T19

7
T19 Diagram
7
Micro SD Card Slot
LED
Indicator
940LED
InfraredLight

8
Before Using Your Conbrov T19 Camera
1. Charging your camera
Steady yellow
Off
Flashing blue and red
Charging
Fully charged
Low power
(1)Charge the camera via your PC or USB charger 5V/1A.
(2)Connect the supplied USB cable to the Micro USB port
and a suitable USB port on your PC or a USB charger
(separate charger not included). The camera must
turn off during charging.
(3)While charging, the LED lights up yellow and turns off
when the camera is fully charged.
2. Installing the microSD
(with the contacts facing down)

9
Caution! Format the microSD before use. Doing this,
however, will remove all data from the card. Make sure to
back up any data before formatting.
Before Using Your Conbrov T19 Camera
(1)Only support a Class 10 microSD with at least 8GB
capacity for recording.
(2)Do not connect or remove the microSD during operation,
this will damage both card and camera.
(3)Do not force the microSD into the microSD slot, this will
damage both card and camera. It only goes in one way.
(4)Ensure that the microSD clicks into place when inserting
it. To remove the microSD, slightly pull it out from the slot.

10
Before Using Your Conbrov T19 Camera
SETTIME
The following menu will be displayed:
SETTIME.TXT
file Edit Format View Help
2016-07-15,23:59:59
yes
yyyy-mm-dd, hh:mm:ss
yes: loop recording on microSD
no: no loop recording
Time format: File name
Modify date and time on the computer.
After setting date and time, click on “File” and then on “Save”.
Please do not add any blank or characters to change the
existing format.
New
Open
Save
Save as
Page settings
Print
Exit
File Edit Format View Help
SETTIME.TXT
1
2
3. Setting the day and time
Insert the micro SD card into the card reader and connect
the card reader to your PC. After a few seconds the micro
SD card will show as a removable disk.
Open the SETTIME.TXT file.

11
Before Using Your Conbrov T19 Camera
Note: If you cannot find the file SETTIME.TXT after
opening the microSD on the computer, please record a
video clip to activate the card and set the date and time
again. The date and time will remain accurate unless the
battery has been depleted for long time.

12
How to Use Your Conbrov T19 Camera
(1) Press and hold the for 2 seconds to switch the camera
on. The LED will flash BLUE 3 time and then turn off ,
which indicates that it is in video recording standby
mode.
ON lights flash BLUE 3
times and then turn off ,
the camera is in video
recording standby mode.
Note: If the camera switches off automatically, there are
two reasons:
1. The battery power is too low and the camera must be
charged.
2. The camera has been in standby mode without any
operation for longer than 1 minute. In this case, the
camera switches off to save battery power.
3.If no microSD is inserted, the LED will flash blue for
10 seconds.
1. Turn On the Camera /Record a Video
OFF lights flash
alternating RED and
BLUE and then turn off.
(2) Press and hold the for 2 seconds to switch the
camera off. The LED will flash alternating RED and BLUE
and then turn off.

13
How to Use Your Conbrov T19 Camera
(1) Press and hold the for 2 seconds to switch the
camera into Motion Detection Mode. The LED will flash
BLUE 1 time and turn off , then flashes RED 3 times and
the RED light will stay on, which indicates that it is in
Motion Detection Mode.
ON lights flash BLUE 1
times and then turn off ,then
flashes RED 3 times and the
RED light will stay on, which
indicates that it is in Motion
Detection Mode.
2.How to Tun On/Off Motion Detection Recording
OFF lights flash
alternating RED and
BLUE 1 time and then go off.
(2) Press and hold the for 2 seconds to turn off Motion
Detection. The LED will flash alternately RED and BLUE
1 time and then go off.

14
How to Use Your Conbrov T19 Camera
3. How to Switch into Night Vision
When ambient light brightness is lower than 20LUX, the
camera will automatically switch into night vision and the
video is black and white.
4. How to Play a Video
Connect the T19 camera to computer, press and hold the
Power Button for more than 2 seconds, the LED will flash
red and the blue light will stay on. Or take out the microSD,
insert it into the card reader (included), then connect the
card reader to computer.
After a few seconds, there will be a removable disk shown
on computer. Open it, and then you'll see the Video files.
Open them to play the video.
USB2.0
1
2

15
Other Tips
How to Reset the Camera
Use the supplied pin or similar tool (like a paperclip) to
reset your camera in case of a malfunction. Press and hold
the Reset Button for several seconds to reset the camera
to standard factory settings.

16
Operation
LED status indication
LED Status
Charging Steady yellow and goes off
once fully charged.
Turn off LED flashes alternately red
and blue and then go off.
Turn on/video
recording
LED flashes blue 3 times and
turns off.
LED flashes red for 10 seconds,
and the camera turns off.
Motion detection
activated
LED flashes blue and turns off,
then flashes red 3 times.
Motion detection
standby The red light will stay on.
Read the disk indicator The blue light will stay on,and
flashes red.
No microSD card
connected
LED flashes blue for 10 seconds,
and the camera turns off.
Reset LED of corresponding modes all
are off and the camera turns off.
Low battery power

17
Technical Specifications
Adapter D C /5V
Battery capacity 8 00 mAh
Camera angle 6 0 °
Night vision range 4 m
Motion detection standby time 1 year
Day recording power consumption 1 30mA
Day continuous recording time 5 hours
Night recording power consumption 4 00mA
Night continuous recording time 2 hours
Charging time 2 hours
Image quality 7 20P
Max storage capacity microSD card 32GB
Loop recording optional
PIR detection distance 5m
PIR detection angle 45°
Video format AVI
USB port Micro 5P

18
FAQs
1. Q: What should I do if all function buttons cannot
work?
A: Reset the camera.
2. Q: Why the camera cannot be read when connected to
PC?
A: Check the USB port of the computer for correct
connection and damages.
A: Check the USB cable for damages.
A: Test the speed and running condition of the computer
itself and restart the computer.
A: Pluck the USB cable, reset the camera as described
in Chapter “Resetting the camera”.
3. Q: Why videos cannot be played or no pictures?
A: Use a different media player or try to restart your
computer.
4. Q: Date/time has been modified but why still not update
on the video?
A: Save the modified time. Modify the time without
changing the date and time format.
5.Q: Why does SD card not save videos or video files
appear 0KB with no content?
A: Re-format the SD card, or use other brand SD card, it
is recommended to use 16GB / 10ClaSS or above.
6.Q: I record something at night, why night vision videos
are dark with no images?
A:Check the night vision lights light or not, and then reset
the camera.
7.Q: Why the camera will not automatically overwrite the
older video files when the microSD card fills to
capacity?
A: Check the SETTIME text document second line whether
the default “YES” , if not, need to be modified to “YES”.