Conbrov T33 User manual

Conbrov T33 Mini Spy Camera
User Manual
Model No.: T33

Table of Contents
Part 1:Before First Use ............................................1-2
Part 2:Quick Guide ....................................................3
Part 3: Detailed User Manual ............................... 4-17
Part 3 Detailed User Manual
Warning on Invasion of Privacy......................................
5
What's Included ..........................................................6
T33 Diagram...............................................................
7
Before Using Your Conbrov T33 Camera........................8
How to Use Your Conbrov T33 Camera .................... 9-17
1. How to Turn On the Camera/Record a Video ...........
12
2.How to Turn On/Off Motion Detection Recording......
12
4.How to Read the Tray.............................................13
Specifications............................................. Technical . 14
LED Status................................................................
15
FAQs........................................................................
16
Warranty...................................................................
17
Disposal....................................................................
17
Declaration of Conformity ............................................
17
4
Safety Precautions .....................................................
3.How to Switch into Night Vision Mode .....................
12

1
Part1: Before First Use
Charging the camera
Before the first use, please charge the camera to
full power.While charging, the LED light turns
yellow and turns off when the camera is fully
charged.
Yellow indicator Yellow indicator
Format the micro SD card
Before the first use, please install SD card and format it to
FAT32 format. (Applicable to Windows system ONLY).
The camera only supports class 10 micro SD cards with
at least an 8GB capacity and a maximum capacity of 32GB.

Part1: Before First Use
Reset the camera
If the camera malfunctions for any reason, reset
it with the included pin. A small paperclip can also
be used.
2
R

Micro-SD USB
12S
Part2: Quick Guide
A. Install the microSD card B.Turn on and record
C. Turn off and save the video D.Play the video
If you need to set the video time watermark, please move to Page 10.
3
2S power off
2S power on
2
US B2 .0
ON lights flash blue 3 times, the
camera power on and enter into
manual recording mode.
Install the micro SD card with
contacts facing up
OFF lights flash red and blue
alternately and then goes off,
the video will be saved in the
micro SD card and the camera
turn off.
Micro-SD USB
Micro-SD USB

Safety Precautions
• Read this instruction manual carefully before using
the camera. It contains important information for your
safety as well as operating and maintenance
instructions.
• Follow all safety precautions in order to prevent
damage due to improper use of the camera.
• Keep this user manual for future use. Should this
camera be passed along to a third party, this user
manual should be handed on as well.
• Use the camera only for its intended purpose.
• In the event of improper use or erroneous handling,
no liability can be assumed for any possible damage
which may occur.
• Never try to repair the camera yourself. Only allow
qualified personnel to repair the camera in the event
of malfunctions.
• Warning! Never immerse the camera in water or other
liquids while cleaning or operating it. Never hold the
product under running water.
• Do not open the housing under any circumstances. Do
not introduce any metal objects into the interior of the
housing.
• Never use accessories which are not recommended
by the manufacturer.
• Keep the camera away from all hot surfaces and
flames. Protect the camera from extreme heat and
cold, dust, direct sunlight, humidity , and water.
• Do not place heavy objects on the camera.
The manufacturer is not responsible for any missing
video data due to maloperation , micro SD card
malfunctions, camera angle limitation, etc.
4

Warning on Invasion of Privacy
.The camera should be used for legal purpose only.
Follow the laws of your country. Recording and
circulating an image of an individual may constitute an
infringement of their privacy for which you could be
liable. Ask for authorization before filming individuals,
particularly if you want to keep your recordings and/or
circulate images on the Internet or any other medium. Do
not circulate a degrading image or one which could
undermine the reputation or dignity of an individual.
5

Conbrov T33 Spy Camera
User Manual
Model No.: T33
What's Included
USB Cable
Card Reader
Pin
6
Camera
User Manual
Magnetic Bracket
Conbrov T33 Mini Spy Camera
User Manual
Model No.: T33

T33 Diagram
7
Reset
Power
USB
Micro SD
Card Slot
Motion
Detection
Recording
Power
/REC

Before Using Your Conbrov T33 Camera
1. Charging your camera
Please refer to the picture above to insert the micro SD card
into the slot. Pay attention to the direction, as the micro SD
card only goes in one way. When inserting the micro SD
card, you need to press it until you hear a click sound.
.
Insert the micro SD card Remove the micro SD card
2. Install the micro SD card
8
(1) Plug the USB cable both in the camera and in a 5V
adaptor or a computer USB port.While charging, the LED
light stays on yellow.
(2) The yellow LED goes off when the camera is fully
charged.
Yellow indicator Yellow indicator
(with the contacts facing up)
Micro-SD USB
Micro-SD USB

2S power on
Before Using Your Conbrov T33 Camera
3. Set Parameters
.(2)Press and hold the button for 2 seconds, the blue light
stays on and the red light flashes, which indicates the
camera enters into the reading tray mode and the disc
icon will appear on your computer.
9
(1)Connect the camera to PC with the included USB cable.
(3)Open the removable disk, you can see "SetCamera"file,
double-click the “SetCamera” file, and then you can see
some related parameters including Language, Time
Watermark, Date Format, Date, Time, Light Frequency,
Image Quality, Overwrite and Audio.
Micro-SD USB

Before Using Your Conbrov T33 Camera
.
10
A. Setting Language: Click drop-down box on the right side
of Language, choose suitable language, then click SAVE.
B. Setting Time Watermark: Click drop-down box on the
right side of Time Watermark, choose Yes(shows the date
and time) or No(no date and time) according to your need,
then click SAVE.
C. Setting Date Format: Click drop-down box on the right
side of Date Format, choose YY/MM/DD, DD/MM/YY or
MM/DD/YY according to your need, then click SAVE.
D. Setting Date: Click up and down button on the right
side of Date, modify the date number according to your
need, then click SAVE.
E. Setting Time: Click up and down button on the right
side of time, modify the time number according to your
need, then click SAVE.
F. Setting Light Frequency (HZ): Click drop-down box
on the right side of the Light Frequency, choose
frequency standard suitable for your country, then click
SAVE.
G . Setting Image Quality :Click drop-down box on the
right side of the Image Quality, choose 1080P/720P/VGA
according to your need, then click SAVE.

Before Using Your Conbrov T33 Camera
11
H. Setting Overwrite: Click drop-down box on the right
side of Overwrite, choose On(loop recording on micro SD)
or Off(no loop recording) according to your need, then
click SAVE.
I . Setting Audio: Click drop-down box on the right side
of Audio, choose On(turn on audio) or Off(turn off audio)
according to your need, then click SAVE.

How to Use Your Conbrov T33 Camera
2.How to Turn On/Off Motion Detection Recording
(1) Press and hold the button for 2 seconds, the blue LED
will flash once and go off and the red light flashes 3 times
and then stays on , the camera turns on and enters into
the motion detection mode.
Micro-SD USB Micro-SD USB
2S
1.How to Turn On the Camera/Record a Video
(2) Press and hold the button for 2 seconds while
recording, the LED flashes red and blue alternately and
then goes off, and the device will save the video in the
microSD card and then turns off.
Micro-SD USB
2S
Micro-SD USB
2S
(1) Press and hold the button for 2 seconds to turn on the
camera. The LED flashes blue 3 times and then goes off,
the camera enters into recording mode.
12

Micro-SD USB
How to Use Your Conbrov T33 Camera
(1) Connect the camera to PC via the included USB cable.
(2) Press and hold the button for 2 seconds, the LED
flashes blue continuously, which means the camera
enters into reading tray mode. The disk icon will
appear on your computer, then open the removable disk.
4.How to Read Disk
13
2S
(2) Press and hold the button for 2 seconds, the LED
flashes red and blue alternately and then goes off, and
the device will save the video in the micro SD card and
then turn off.
3.How to Switch into Night Vision Mode
During recording , ambient light brightness is lower than
10LUX, the camera will automatically switch into night
vision and the video is black and white.
Micro-SD USB
2S
Micro-SD USB

Power supply
Infrared light angle
Battery type
Battery capacity
Video format
Video recording
Resolution
Lens angle
Infrared type
Technical Specifications
MicroSD card capacity
Night vision
PIR detection
Max daytime
recording time
Max night vision
continuously recording time
USB port
Day time recording power
consumption
Night vision recording
power consumption
PIR detection angle
Motion detection standby
mode time
DC 5V
45°
Polymer lithium battery
1000 mAh
AVI
1080P/720P/VGA
Max 32GB
940
MJPEG
8 meters
5 meters
45°
6 hours
3 hours
1 year
130 mAh
330 mAh
Micro 5P
110°
14

Charging
Fully charged
Power off
Manual recording
Motion detection
recording
Steady yellow
Yellow light goes off
Blue and red light flash and
then goes off
Blue LED flashes 3 times
and goes off
Blue light flashes once and
goes off , then red light flashes
3 times and stays on
Motion detection
standby mode Steady red
LED Status
15
Read the disk Blue light flashes continuously
Power on without
SD card
Reset
Low power
Blue light flashes 10 times
and the camera turns off
The corresponding mode
indicator light goes off and
the camera turns off
Red one flashing 10 times and
the camera turns off

1. Q: What should I do if the camera happens to
malfunctions?
A: Please reset the camera.
2.Q:What should I do if the disk can't be read?
A.Check if the USB cable can't contact well or be damaged.
B. Check the computer's USB port and connect with other
USB port.
C. Check the computer's internet speed and operating
condition, and restart the computer.
D.Unplug the USB cable and reset the camera, read the
disk again.
3. Q: What if the video can not play or play without sound?
A: Please play with other video player or restart the computer.
4. Q: What should I do if the SD card can not save video or
the storage is 0KB?
A: Please format the SD card or use another brand SD card.
Kindly suggest using the SD card which is class 10 and larger
than 16G.
5. Q: Why I can't see anything in the night vision video, but the
sound is normal?
A : You can check if the Infrared light is on when recording in
night vision mode and reset the camera.
6. Q: Why the date of the camera can not be updated?
A: Please check whether the SETTIME file save or not. Don't
change the original format of the date.
7.Q: Why the camera turns off when the storage is full? Is it
support loop recording?
A: Check the option of overwrite setting in "SetCamera",
please change it into " ON ".
FAQS
16

All products sold by the Conbrov Group are covered by a
12-month full replacement warranty.
Happy with it? Share your experience with an Amazon
review.
Or any questions?
Our friendly customer service team is ready to
help: [e-mail]
Contacting us via the above email address,which is the
quickest way to reach our support team.
For the electronic user manual and more information,
please visit:
Disposal
Electrical products should not be discarded with
household waste. According to the European
Directive 2012/19/EC on waste electrical and
electronic equipment and its implementation into
national law, electrical products used must be
collected separately and disposed of at collection
points provided for this purpose. Talk with your
local authorities or dealer for advice on recycling.
Declaration of conformity
Conbrov Electron Co., Ltd., Room 908 Huiyicaifu Center, c/o
Queshan and Longhua Roads, Shenzhen, China, declares
under our sole responsibility that the product Starlight Mini
Camera T19, to which this declaration relates, meets all
relevant European standards and directives. For the complete
declaration of conformity visit our website www.conbrov.com.
Warranty
17

23
Trademarks
All trademarks or registered trademarks are the property
of their respective owners.
Manufacturer
Conbrov Electron Co., Ltd.
Room 908 Huiyicaifu Center,
c/o Queshan and Longhua Roads
Shenzhen, People's Republic of China
About Us
Conbrov Electron Co., Ltd. founded in 2003 is an innovative
technology research company specialized in personal
surveillance cameras and on-dash cameras. Conbrov products
and technology are patent protected by PCT or U.S. Patent
Office. Based on years of professional experience and
knowledge, we are able to provide the best and most efficient
products and customer service.