CONCORD Duo 2000 User manual

ENGLISH ..................................................................................................1
FRANÇAIS ................................................................................................7
DEUTSCH ................................................................................................13
ESPAÑOL ................................................................................................19
CONTENTS
CONTENTS
Duo 2000 QS Guide (511443-01) 15/10/02 3:53 pm Page 1

1
FRONT/TOP
1. Shutter Button
2. Lug for Neck / Wrist Strap
3. Viewfinder
4. Self-timer LED
5. Flash
6. Flash Sensor
7. Ir Filter and Lens
8. Power Button
9. Camera Ready LED
10. LCD
11. Cable Connection Panel
12. Tripod Socket
13. Mode Switch
14. Navigation Button
15. Menu Button
16. OK Button
17. LCD On/Off Button
18. Battery Door
QUICK START GUIDE
This Quick Start Guide provides a quick reference for operating your new
digital camera. Refer to the User’s Guide, which can be found on the CD-
Rom and a hard copy in your Concord Eye-Q Duo 2000 box, for detailed
instructions on how to use all of your camera’s features. Before using the
camera, make sure to read all safety instructions and precautions outlined
in the User’s Guide.
QUICK START GUIDE
ENGLISH
1
2
3
5
6
4
7
8
9
10
11
12
13
14
15
16
17
18
BACK/BOTTOM
Duo 2000 QS Guide (511443-01) 15/10/02 3:53 pm Page 2

LOADING THE BATTERIES
The Concord Eye-Q Duo 2000 uses 2x AA LR6 (sold separately)
batteries.
To load the batteries:
1. Locate the battery door on the bottom of the camera.
2. Slide the button on the battery door toward the center of
the camera. (fig.1.1)
3. Lift the battery door to open.
4. Insert the batteries with the positive terminal toward the +
sign, and the negative terminal toward the – sign. (fig.1.2)
5. Close the battery door.
TURNING THE CAMERA ON AND OFF
When the camera is turned on, the camera ready LED on the
back of the camera blinks and the LCD displays the current
settings.
1. Press the Power button.
2. The camera is ready for picture taking when the camera
ready LED stops blinking and LCD icons appear on the LCD.
(fig.1.3)
3. To turn the camera off, press the Power button.
SETTING THE FLASH
1. In the FLASH menu, press or to choose between Auto ( ), Flash ( ),
and Flash Off ( ).
2. Press OK to select the flash mode and press MENU to exit.
2
fig.1.1
fig.1.2
fig.1.3
Mode
Size
Quality
Flash
MAIN MENU
MAuto
Flash
Flash Off
OK MENU
FLASH
A
A
Duo 2000 QS Guide (511443-01) 15/10/02 3:53 pm Page 3

Flash Status Distance from subject
Auto ( ) 3.9ft (1.2m) to 8.5ft (2.5m)
Flash ( ) 3.9ft (1.2m) to 8.5ft (2.5m)
Flash Off ( ) 3.9ft (1.2m) to infinity
Note: The flash may need time to recharge between photos. While it is charging
the camera ready LED blinks. When it stops blinking you are ready to take
another picture. If the batteries are low, the flash will not work. Insert fresh
batteries.
TAKING IMAGES
1. Set the camera to Camera Mode by moving the Mode Switch
to .
2. Position the subject in the viewfinder OR the LCD.
3. Gently press the Shutter button (fig.1.4) and keep the camera
still until the camera ready LED next to the viewfinder
flashes. (fig.1.5)
4. When the image has been captured, the camera ready LED
next to the viewfinder begins to blink. This indicates that
the image is being processed.
5. A preview of the image will be displayed on the LCD for 1
second after it is captured and the file counter number
displayed in the LCD will be updated.
3
fig.1.4
fig.1.5
A
Duo 2000 QS Guide (511443-01) 15/10/02 3:53 pm Page 4

4
TAKING VIDEO CLIPS
1. When Video Clip is highlighted in the MODE menu press .
2. Press the Shutter button to begin recording a continuous video clip.
3. Press the Shutter button again to stop recording.
4. The camera will continue recording until the memory is full.
OR
5. When the recording is completed, the camera will return to Camera Mode.
Note: If you would like to cancel your video clip session before pressing the
Shutter button, press MENU to exit.
USING THE MMC/SD
In addition to internal memory, the camera features an external memory port that
uses a removable MMC/SD that allows you to store additional images. When the
MMC/SD is inserted, the camera uses it as its default memory. The stored images and
video clips in the internal memory will be transferred automatically to the MMC/SD,
and all photos taken from that point will be stored on it. The images will remain
stored on the MMC/SD until deleted.
Inserting the MMC/SD:
1. Locate the battery door on the bottom of the camera.
2. Slide the button on the battery door toward the center of
the camera.
3. Lift the battery door to open.
4. Insert the MMC/SD in the direction specified on the card.
(fig.1.6)
5. Close the battery door.
NOTE: If a MMC/SD with insufficient memory is inserted, there will only be a
partial transfer and the MMC/SD will be filled. Please insert an MMC/SD with
sufficient memory.
fig.1.6
Mode
Size
Quality
Flash
MAIN MENU
MVideo Clip
Self-timer
Main Menu
MODE
SHUTTER TO •REC
MENU TO CANCEL
SHUTTER TO STOP
•REC
Duo 2000 QS Guide (511443-01) 15/10/02 3:54 pm Page 5

5
DELETE ONE FILE
To delete a single file from the internal memory:
1. Slide the mode switch towards .
2. Press MENU.
3. When Delete One is highlighted in the DELETE menu, press .
4. The next screen will read "Delete This File?" Press or to highlight No or Yes
and press OK to select.
5. If Yes is selected, the file will be deleted.
6. If No is selected, no change will be made.
SOFTWARE INSTALLATION
NOTE: Do not connect the camera to your computer before the camera drivers
and software installation is completed.
Installing the Camera Drivers and ArcSoft Applications:
1. Insert the CD-ROM included in your Concord Eye-Q Duo 2000 box.
2. The installation screen appears on the computer’s monitor. Follow the software
installation instructions on your screen to install the software.
3. When the CD-Rom installation is finished, connect your camera to the computer to
complete installation.
4. Follow the on-screen instructions to complete the installation.
NOTE: If your computer has the CD-ROM automatic installation disabled,click on
START. Select MY COMPUTER and locate the CD-ROM Drive. Double click on the
CD-ROM Drive icon to show its contents. Double-click on the file named
SETUP.EXE and follow the instructions on your screen.
Delete One
Delete All
Main Menu
DELETE
DELETE
THIS FILE?
No
Yes
Delete
Thumbnail
Brightness
Exit
MAIN MENU
Duo 2000 QS Guide (511443-01) 15/10/02 3:54 pm Page 6

6
TRANSFERRING FILES TO THE COMPUTER
After installing the drivers and software, you may transfer files to your computer.
1. Select either PC (Windows Only) or DSC in the Setup Menu.
•Set the Mode switch to .
•Press the MENU button. Use the button until Setup is highlighted.
•Press to enter the Setup menu.
•In the Setup menu, press until Driver is highlighted.
•Press to select DSC or PC.
2. Connect your camera to the computer using the USB cable provided.
USING THE PC DRIVER MODE:
1. Launch ArcSoft PhotoImpression by clicking on Start-Programs-ArcSoft Camera Suite.
2. Click on the (Camera/Scanner) button.
3. Click on the drop-down list under SELECT SOURCE and choose Concord Eye-Q Duo 2000.
4. Click on the Camera/Scanner icon. A window will appear with the images you have
transferred.
USING THE DSC MODE (Windows):
1. Open My Computer.
2. Click on the removable disk drive.
3. Double-click on an image or video clip and windows will automatically open the file.
USING THE DSC MODE (Mac):
1. The external hard drive will appear on the desktop.
2. Open the “untitled” removable drive that is on your desktop and open DCIM to view your
files.
3. Click on the file that you would like to view.
Concord, Concord Eye-Q and the Concord Eye-Q logo are registered trademarks or trademarks of Concord
Camera Corp., in the United States and/or other countries. Microsoft and Windows are either registered
trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Mac and
Macintosh are registered trademarks or trademarks of Apple Computer, Inc. in the U.S. and other countries. All
other brands and product names are either registered trademarks or trademarks of their respective owners.
Copyright 2002 Concord Camera Corp.
Time-out 60S
Driver DSC
TV PAL
PlayLogo O f f
SETUP
Setup
Exit
MAIN MENU
Time-out 60S
Driver PC
TV PAL
PlayLogo O f f
SETUP
Duo 2000 QS Guide (511443-01) 15/10/02 3:54 pm Page 7

FRANÇAIS
7
AVANT/DESSUS
1. Déclencheur
2. Fixation pour dragonne
3. Viseur
4. Indicateur Lumineux de la
Minuterie Automatique
5. Flash
6. Capteur du flash
7. Filtre Ir et objectif
8. Bouton d’Alimentation
9. Indicateur Lumineux Prêt à
l’Emploi de votre Appareil-
Photo
10. LCD
11. Panneau de Branchement du
Câble
12. Prise d’Adaptation sur
Trépied
13. Bouton Mode
14. Bouton de Fleches
15. Bouton Menu
16. Bouton OK
17. Écran LCD Sous tension/Hors
tension
18. Trappe du Compartiment à
Piles
GUIDE DE DEMARRAGE RAPIDE
Les références de ce guide de démarrage rapide vous permettent d’utiliser
rapidement votre nouvel appareil digital. Pour des explications plus
détaillées sur toutes les caractéristiques de votre appareil, veuillez lire le
guide de l’utilisateur qui se trouve sur le CD-Rom situé dans le coffret du
Concord Eye-Q Duo 2000. Avant d’utiliser l’appareil, veuillez lire toutes les
instructions de sécurité et de précaution décrites dans ce guide.
GUIDE DE DEMARRAGE RAPIDE
1
2
3
5
6
4
7
8
9
10
11
12
13
14
15
16
17
18
ARRIERE/BASE
Duo 2000 QS Guide (511443-01) 15/10/02 3:54 pm Page 8

INSERTION DES PILES
Le Concord Eye-Q Duo 2000 fonctionne avec 2 piles AA LR6.
Insertion des piles
1. Localisez la porte du compartiment à pile au bas de
l’appareil.
2. Poussez le bouton sur la porte du compartiment vers le
milieu de l’appareil. (schéma 1.1)
3. Soulevez la porte du compartiment à pile pour l’ouvrir.
4. Insérez les piles côté positif vers le signe + et côté négatif
vers le signe – . (schéma 1.2)
5. Fermez la porte du compartiment à pile.
MARCHE ET ARRET DE L’APPAREIL
Lorsque l’appareil est en marche, le LED d’appareil "prêt"au dos
de l’appareil se met à clignoter et le LCD de contrôle affiche les
réglages de l’appareil.
1. Appuyez sur le bouton Power (Alimentation).
2. L’appareil est prêt à prendre des photos lorsque le LED
d’appareil "prêt" cesse de clignoter et que les icônes du LCD
apparaissent. (schéma 1.3)
3. Pour éteindre l’appareil, appuyez sur le bouton Power.
FLASH
1. Dans le menu FLASH, appuyez sur ou pour choisir entre Flash
automatique ( ), Flash ( ), et Flash hors fonction ( ).
2. Appuyez sur OK pour sélectionner le mode de flash et appuyez sur MENU pour
sortir.
8
schéma.1.1
schéma.1.2
schéma.1.3
Mode
Taille
Qualité
Flash
MENU
MAuto
Actif
Inactif
OK MENU
FLASH
A
A
Duo 2000 QS Guide (511443-01) 15/10/02 3:54 pm Page 9