Connect CSH-PLGPM-AC1 User manual

Smart Wi-Fi Plug
CSH-PLGPM-AC1
with Dual USB and Power Monitoring
User Manual

What’s In The Box
• Smart Plug
• User Manual

Specifications
Power Supply: AC100 ~ 240V
Input Frequency: 50/60Hz
Load Current: 10A max 2400W
Resistive load
USB Output: 1 x USB-A, 1 x USB-C
5V/2.0A (each)
Total Output: 5V/2.0A
Wi-Fi: Wi-Fi 802.11 b/g/n
Wi-Fi Frequency: 2.4GHz
Security: WAP/WAP2
Encryption Type: WEP/TKIP/AES
Working Consumption: <0.9W
Standby Consumption: <0.6W
Working Temperature: -20°C - 50°C, < 80%
Humidity
Storage Temperature: -20°C - 60°C, < 80%
Humidity
Weight: 130g
Dimensions: 100 x 43.3 x 57.5mm

Product Diagram
USB-A
AC Socket
Power &
Pairing Button
Indicator
Light
USB-C

Note: In this manual we cover the EZ pairing
mode instructions.
• Fast Flashing = EZ pairing mode.
• Slow Flashing = AP pairing mode.
There are 2 flashing states:
• Press and hold the pairing button for
5 seconds.
• A LED indicator light will start flashing.
Power & Pairing
Button Controls

Getting Started
with the App
1. Install the Connect SmartHome
App for your Smartphone from the
iOS App Store or Google Play.
2. Log in with an existing
Connect SmartHome account
or create a new account.

Connecting
to the App
1. Turn on the Bluetooth
function on your Smartphone.

Connecting
to the App
continued...
3. Open the Connect SmartHome
App and tap the “+” icon to
add a device.
Hold for 5 secs
2. Press and hold the Pairing Button on the
smart plug for 5 seconds till you get a
fast-flashing indicator light.

4. The smart plug icon should
appear. Select “Add” under
“Discovering Devices”.
5. Enter your Wi-Fi details.
Connecting
to the App
continued...

6. Tap the “+” icon next to the
smart plug
Connecting
to the App
continued...

7. When finished pairing tap
“Done”, then the device will
appear on the Connect SmartHome
App home screen.
NOTE: If you are unable to pair
successfully with the smart
plug, please check your
Wi-Fi password and make sure
you are only using a 2.4GHz
Wi-Fi connection. 5GHz
connections are not supported.
Connecting
to the App
continued...

Using the Plug
Power On/Off
Schedule Energy
Monitoring
Settings

Using the Plug
continued...
Previous
Electricity
Use
Current
Electricity
Use

Using the Plug
continued...
Set shedule
startime
Set days
schedule
will action
Save
schedule
Set shedule
function

Adding Connect SmartHome
to the Google Home App
• Open the Google Home App.
• In the “Google Home”main screen, select the
“+” icon to set up device.

• Select “Set up device” to add new device,
then select “Works with Google”.
continued...
Adding Connect SmartHome
to the Google Home App

• A list will appear showing actions and a search
function to access more apps: from here, search
for the Connect SmartHome App.
continued...
Adding Connect SmartHome
to the Google Home App

• Log into your Connect
SmartHome account
with your email address.
• Click “Done” and then
it will give you a list of
commands available.
• When successfully
linked, you will see the
smart plug on your
“Home Control” screen.
• Once linked, it will show
the devices linked to your
account: you can assign
them to rooms. You will be
prompted to authorize
apps to sync.
Adding Connect SmartHome
to the Google Home App
continued...

Troubleshooting
The Smart Plug is not connecting
to the App.
• Check your Wi-Fi username and password are
correct.
• Make sure you are only using a 2.4GHz Wi-Fi
connection as the 5GHz band is not supported.
• If you are unsuccessfully connecting using
Bluetooth with EZ Mode. Switch the pairing mode
to AP Mode by pressing and holding the Pairing
Button for 5 seconds till you get a slow flashing
light. On the app select the +icon to add device,
select the Electrical category, then select Socket
(Wi-Fi). Enter you Wi-Fi credentials then on the
next screen in the top right change the selection
from EZ Mode to AP Mode. Follow the remaining
instructions outlined in the app to connect via AP
Mode.

Troubleshooting
continued...
• Check you have a device connected to the smart
plug and that it has been switched on.
• Power usage data can take 12 – 24 hours to
display in the app. You may need to leave your
device running longer for the data to update in the
app.
I cannot see any Power
Monitoring data.
• Both the USB and AC socket power is controlled
by the main power button. There is no way to
control these individually.
How to control the USB ports
separately to the AC socket?