Connection Tubes User manual

Tubes
Power Assembly Instructions
connection.uk.com

Assembly Instructions
Tubes Table Power
Components & Fixing Kit
Tubes Tables will always be supplied with;
1. Power bar x 1
2. Power bar ends x 2
3. Phase power modules x 2
4. 5m power cable extension x 1
5. Cable clips x 3
6. M8 x 16 Button head bolt x 4 (in fixing kit)
7. M4 x 6 Button head bolt x 8 (in fixing kit)
8. M4 x 6 csk pozi head x 8 (in fixing kit)
1. Fit power end brackets to each end of the
power bar with M4 x 6 button head bolts.
2. Remove fixing plate from phase power
modules.
3. Attach fixing plate to the power ends of the
power bar with M4 x 6 csk pozi head screws.
4. Attach power modules to fixing plate.

Assembly Instructions
Tubes Table Power
5. Connect power modules to the 4 way distributor
block and attach the 5m extension cable.
6. Connect complete power bar to the table
top with M8 x 16 bolts.
7. Using the 3 cable clips, cable manage the 5m extension to your desired location and plug in to power up the
table.

© Connection Seating Limited 2020. All rights reserved.
London Showroom
31 Great Sutton Street,
Clerkenwell,
London,
EC1V 0NA
Tel: [phone]
www.connection.uk.com
Head Office & Showroom
Dogley Mills,
Penistone Road,
Huddersfield,
West Yorkshire,
HD8 0LE
Tel: [phone]
[email protected]
Manchester Showroom
The Old Law Library,
Kennedy Street,
Manchester,
M2 4BY
connection.uk.com