P wer n BT023 speakers
Put the speakers on plane surface. Adjust according to your desire the position and the distance of the
speakers to your Bluetooth peripheral. Put the power switch to ON.
The LED indicator will lit in white you have to pair the BT023 speaker to your Bluetooth device.
BT040 speaker pairing
Before using the BT023 speaker check that it has enough power to operate. Check that your
Bluetooth peripheral is compliant or has the right connection to be used with the speaker.
To use your Bluetooth BT023 speaker you must first pair the headset with a smartphone or a
Tablet PC iPad or computer. Once your Bluetooth BT023 speaker is paired with your device they will
remain paired and automatically recognize each other whenever they are within range.
Pairing is the process of establishing encrypted link between BT023 speaker and Bluetooth device.
Pairing BT023 speaker with Wind ws 8
From the App list screen tape on Settings then click on Bluet th.
Check that Bluet th is on position ON. If it is on OFF tap on it to turn it on.
Press button of the speaker for about 3 seconds until the LED flash in white.
The speaker will appeared in Devices as BT023 and is not yet paired. Tap on it. Let the device search
for the BT023 speaker. Wait for the pairing process to complete.
If the connection is successful there will be a short bip. LED will glitter in white during the use of the
speaker. Otherwise wait for the pairing process to complete.
A message will display that the speaker is connected. You can use it with your device. If the pairing
failed do again the process until you succeed.
Pairing the BT023 speaker with iPad
Go to Settings in the desktop of your iPad. Tap on General. Check that Bluet th is on position ON.
If it is on OFF tap on it to turn it on. Press button of the speaker button for about 3 seconds
until the white LED flash.Wait for the pairing process to complete.
If the connection is successful you will hear short bip. Otherwise wait for the pairing process to
complete. A message will display that the speaker is connected. You can use it with your iPad.
The LED of the speaker will flash in white during the use of the speaker.
If the pairing failed do again the process until you succeed.
Pairing the BT023 speaker with Andr id
Go to your Android device menu. Go to Applicati ns then Settings. Touch Wireless and netw rks.
Touch Bluet th. Check that Bluetooth is enabled otherwise touch Bluet th again. Press Bluetooth
button for about 3 seconds until the LED flash in white.
Touch Bluet th settings. Touch Search f r devices. The speaker will appeared in Devices list as
BT040. The speaker Bluetooth LED indicator will blink in white. Wait for the pairing process to
complete.
If the connection is successful you will see that the BT040 speaker is connected. You can use it.
The LED of the speaker will flash in white during the use of the speaker.
If the pairing failed do again the pairing process until you succeed.
Aux plug
Connect one end of the 3 5mm Jack stereo plug to the input of your audio device such as smartphone
mobile phone computer and the other end of the 3 5mm Jack stereo plug to rear Aux plug of the
Bluetooth BT023 speaker. You have to adjust the volume of your audio device to set the volume.
If you press you will enter mute mode. Press again to access to sound.The LED indicator
blinks in white when you are using the speaker in Jack stereo mode.
Play/Pause music
Press button one time to play or pause music.
