Connects2 CAM-LR3-AD User manual

www.connects2.com
CAM-LR3-AD
Rear View Camera-Input & Video-In-Motion
Application:
Land Rover Range Rover 2015 - 2016, Evoque 2015 - 2016
For Touch Screen Navigation Version 4.0 Head Units
without Meridian Sound System

www.connects2.comwww.connects2.com
2
ABOUT THIS PRODUCT...
CAM-LR3-AD
Rear View Camera-Input and Video-In-Motion for Land Rover Vehicles 2015> with
Touch-Screen Navigation Version 4. Add on Camera interface designed to allow
the addition of an aftermarket reverse camera to the OEM screen - compatible
with NTSC cameras only.
Prior to Installation
Read the manual prior to installation. Technical knowledge is necessary for installa-
tion. The place of installation must be free of moisture and away from heat sources.
Please ensure you use the correct tools to avoid damage to the vehicle or product.
Connects2 can not be held responsible for the installation of this product.
Technical Support
Connects2 want to provide a fast and suitable resolution should you encounter any
technical issues. With this in mind, when contacting Connects2, try to provide as
much Information as possible. This will speed up the process and help us to help you.
Please use our dedicated online technical support centre: support.connects2.com
Subscribe to our YouTube Channel for installation
guides and tips... www.youtube.com/connects2

www.connects2.comwww.connects2.com
3
FITTING GUIDE/PIN-ASSIGNMENTS
Setting the Dip Switches of the Interface
Vehicle/ navigation Dip 1 Dip 2 Dip 3 Dip 4 Dip 5 Dip 6
Video-in-motion permanent ON ON OFF OFF ON ON
Video-in-motion selective* OFF ON OFF OFF ON ON
* With Dip1 set to “OFF”, the included green cable is used to activate the video
in motion function
Dipswitch Functionality
Dip 1 – activation TV-free
Dip 2 – rear-view camera existing
Dip 3 – no function
Dip 4 – no function
Dip 5 – CAN-bus termination resistor on the vehicle side
Dip 6 – CAN-bus termination resistor on the head-unit side
Setting Dip2 to “ON” codes the factory rear-view camera input, which is
located on the blue double Fakra male connector of the head unit.
When reverse gear is engaged, the navigation will automatically switch to this
input.
Pin Conguration
Quadlock Connector:
Function Pin-No.
CAN-HIGH Pin 3 (chamber B)
CAN-LOW Pin 9 (chamber B)
+12V permanent Pin 13
Ground Pin 11

www.connects2.comwww.connects2.com
4
PIN-ASSIGNMENTS/CONNECTION DIAGRAM
Interface Pin Conguration
Cable Colour Pin-No. Assignment
Yellow Pin 4 CAN-HIGH – connection to the head-unit
Blue Pin 3 CAN-LOW – connection to the head-unit
Yellow/Black Pin 8 CAN-HIGH – connection to the vehicle
Blue/Black Pin 7 CAN-LOW – connection to the vehicle
Red Pin 1 +12V Permanent
Black Pin 5 Ground
Green Pin 6 Activation of the video-in-motion function
(+12V = TV-free activated)
White Pin 2 No function
Connection Diagram
Supplied
Adapter
Supplied
Harness
Interface
Box

www.connects2.comwww.connects2.com
5
INSTALLATION
NB: Before installation, switch off ignition, disconnect the vehicle battery and
remove the vehicle’s head unit.
The interface is installed behind the vehicle’s head unit.
Connecting the CAN-Box, Harness and Factory Head Unit
Interface
Box

www.connects2.comwww.connects2.com
6
INSTALLATION
1. Connect the female 8pin Molex connector of the harness to the male 8pin
Molex connector of the Interface.
2. Transfer the Quadlock connector of the vehicle harness from the rear of the
head unit into the male Quadlock connector of the harness.
3. Plug the female Quadlock connector of the harness into the male Quadlock
connector on the rear of the head unit.
If existing, disconnect the original blue double Fakra socket from the Head Unit
and connect it to the double Fakra male plug of the supplied adapter.
Connect the double Fakra socket of the supplied adapter to the double blue
Fakra-connector on the rear of the head unit.
Connect the video RCA of the rear-view camera to the female RCA connector
of the supplied adapter
Note: Only compatible with NTSC cameras.
Supplied
Adapter

www.connects2.comwww.connects2.com
7
INSTALLATION/SPECIFICATIONS
Activating Video in Motion
The video-in-motion can be activated and deactivated by Dip 1 or alternatively
by the included loose green cable in connection with a switch (not included in
delivery).
Video-in-motion permanent
With dip1 to ON the video-in-motion function is activated permanently without
disturbing the navigation performance.
Video-in-motion selective
With dip1 to OFF the included green cable is used to activate the video-in-motion
function.
Connect a switch to the green cable and connect the green cable to +12V
ACC.
● +12V = TV-Free is activated
● 0V = TV-Free is not activated
Note: The loose white cable is not required and must be isolated.

www.connects2.com
8
NOTES