Contec CONPROSYS nano CPSN-DI-16BCL User manual

Ver.1.02
CPSN-DI-16BCL 1
CONPROSYS nano Series
Digital Input Module 16ch, Built-in power supply
CPSN-DI-16BCL
* Specifications, color and design of the products are subject to change
without notice.
This product is an expansion I/O module that adds an opto-coupler
isolated input interface with a response speed of 200 μs or less to the
CPU unit of the CONPROSYS nano series.
The product is equipped with 16 inputs and 1 common that support
current sink/source output, and the internal circuit power supply of 12V
and the external circuit power supply of 12-24V can be switched with
the switch.
* The contents in this document are subject to change without notice.
* Visit the CONTEC website to check the latest details in the document.
* The information in the data sheets is as of September, 2021.
Features
- Opto-coupler isolated input
The product contains 16 channels of opto-coupler isolated input whose response
speed is 200µsec or less. Also, current sink outputs and current source outputs are
switchable with the switch.
- Internal circuit power supply and external power supply
The switch is equipped to switch between the internal circuit power supply of 12V
and the external circuit power supply of 12-24V.
- All of the input signals are usable as interrupt events
You can use all of the input signals as interrupt events and also disable or enable
the interrupt in bit units and select the interrupt edge.
- Equipped with a digital filter function to prevent false recognition of input
signals due to noise and chattering
This product is equipped with a digital filter that can prevent input signal noise and
chattering. The input digital filter can be applied to all input terminals individually,
and configuration can be performed using the software.
- Input counter function
Digital input and counter input can be switched per channel. The counter values
are automatically saved upon turning off the power.
- Easy installation and removal
This product can be installed in and removed from the CPU unit without any tools.
- Adaptable to a wide range of temperature between -20 and +60°C
The product is capable of operating in the temperature between -20 and + 60°C. It
can be installed in the various environments.
- Equipped with the LED for an operation check
The product has the LED for an operation check, which helps you visually confirm
the communication status of each interface.
Packing List
Product [CPSN-DI-16BCL] …1
Product Guide & Warranty Certificate …1
Serial Number Label … 1
Specification
Function Specifications
Item
Description
Input
Input type
Opto-coupler isolated input (supports current sink [negative logic] output
*1/current source [positive logic] output *2)
Isolation
Opto-coupler Isolation
Voltage Resistance
500VACrms
Input Resistance
8.2kΩ
Input ON current
1.0mA or more
Input OFF current
0.16mA or less
Interrupt
16 interrupt input signals are arranged into a single output of interrupt signal.
An interrupt is generated at the falling edge (HIGH-to-LOW transition)
and the rising edge (LOW-to-HIGH transition) or at both of the edges. (setting
can be done by software)
Software filter (LPF)
1msec – 1000msec *3
Response time
Within 200μsec
Number of input signal
channels
16 (shared common)
LED
DI00 – DI07 (Green), DI10 – DI17 (Green)
Common
Connector
MIL connector 20-pin (2.54mm pitch 10 x 2 lines)
Applicable wire
Flat cable with MIL connector
External circuit power
supply
12 - 24VDC (±10%)
Internal circuit power
supply
12VDC
Combined current output of 62 mA allowed as external output current for all
inputs
Electricity consumption
5V 0.15A (Max.)
3.3V 0.10A (Max.)
Allowable distance of
signal extension
Approx. 50m (depending on wiring environment)
Physical dimensions
(mm)
15.6 (W) x 52.6(D) x 84(H) (not include projection)
Weight
50g
*1 Data “0” and “1” correspond to the High and Low levels, respectively.
*2 Data “0” and “1” correspond to the Low and High levels, respectively.
*3 To meet the specified CE EMC Directive, set the digital filter one meter or longer.
PLUG-IN Electronic GmbH • Am Sonnenlicht 5 • 82239 Alling • Tel.: [phone] • [email protected] • www.plug-in.de

Ver.1.02
CPSN-DI-16BCL 2
Installation Environment Requirements
Item
Description
Operating ambient temperature *1
-20 - +60°C (Vertical installation)
-20°C to +55°C with a vertical installation at an angle of 90° to the
left/right or with a horizontal installation.
Operating ambient humidity
10 - 90%RH (No condensation)
Non-operating ambient
temperature
-20 - +60°C
Non-operating ambient humidity
10 - 90%RH (No condensation)
Floating dust particles
Not to be excessive
Corrosive gases
None
Line-noise
resistance
Line noise
Signal Line /±1kV (IEC61000-4-4 Level 3, EN61000-4-4 Level 3)
Static electricity
resistance
Touch /±4kV (IEC61000-4-2 Level 2, EN61000-4-2 Level 2)
Air /±8kV (IEC61000-4-2 Level 3, EN61000-4-2 Level 3)
Vibration
resistance
Sweep
resistance
10 - 57Hz *2 /semi-amplitude vibration 0.15mm, 57 - 150Hz/2.0G
40minutes each in X, Y, and Z directions (JIS C60068-2-6-compliant,
IEC60068-2-6-compliant)
Shock resistance
15G half-sine shock for 11ms in X, Y, and Z directions
(JIS C 60068-2-27 –compliant, IEC 60068-2-27 -compliant)
Standard
VCCI Class A, FCC Class A,
CE Marking (EMC Directive Class A, RoHS Directive)
*1 Derating by way of the output current is necessary. (Refer to "Derating" of reference manual
for details.)
*2 With the optional DIN rail fitting power supply: 10 - 55Hz (for details, see the user’s guide of
the optional power supply).
Physical Dimensions
List of Options
CPU unit
Remote I/O CPU unit : CPSN-MCB271-S1-041
Remote I/O CPU unit LAN HUB model : CPSN-MCB271-1-041
CODESYS Modbus Master CPU unit : CPSN-PCB271-S1-041
DIN rail fitting power supply
Fitting power supply 30W
(Input: 100 - 240VAC, Output: 24VDC 1.3 A) : CPS-PWD-30AW24-01
Fitting power supply 90W
(Input: 100 - 240VAC, Output: 24VDC 3.8 A) : CPS-PWD-90AW24-01
* Visit the Contec website for the latest optional products.
Name of each parts
No.
Name
Function
1
LED Indicator
Displays the digital input status.
2
Interface Connector
This is a connector for digital input.
3
Power Supply Switching Switch
Use this switch to switch between the internal circuit power supply and
the external circuit power supply.
4
Output Type Switching Switch
Sink Output or Source Output: Use this switch to switch the output
types.
Digital Input Connector
This product has 16 channels of digital input. Connect with the 20-pin
MIL c o n n e c t o r.
Connector used on the product: XG4A-2034 (OMRON)
Compatible connector type: XG4M-2030 (OMRON)
Pin Assignment
Pin No.
Signal Name
Description
1, 2 PCOM
When connecting to sink output, connect these pins to the positive side of the
external circuit power supply.
There is one common for all inputs of DI00 - DI07 and DI10 -DI1.
When external circuit power supply and source output are set, they are left
unconnected (N.C).
3, 4 MCOM
When connecting to source output, connect these pins to the negative side of
the external circuit power supply.
There is one common for all inputs of DI00 - DI07 and DI10 -DI1.
When external circuit power supply and sink output are set, they are left
unconnected (N.C).
6, 8, 10, 12,
14, 16, 18, 20
DI00 -DI07
This indicates the input signals. It connects the output signals from the other
devices.
5, 7, 9, 11,
13, 15, 17, 19
DI10 -DI17
This indicates the input signals. It connects the output signals from the other
devices.
PLUG-IN Electronic GmbH • Am Sonnenlicht 5 • 82239 Alling • Tel.: [phone] • [email protected] • www.plug-in.de

Ver.1.02
CPSN-DI-16BCL 3
Switching Switch
The product has switches to switch between internal and external
circuit power supplies, and also between sink and source outputs.
Switch
Switch
Description
Power Supply Switching Switch
Use this switch to switch between the internal and external circuit power supplies.
I: Use the internal circuit power supply of 12V. (INTERNAL, Factory settings.)
E: Use the external circuit power supply. (EXTERNAL)
Output Type Switching Switch
Use this switch to switch the output types.
SI: Sink output (SINK, Factory settings.)
SO: Source output (SOURCE)
The signals on the interface connector change as listed below according
to the switch setting
Power Supply Switching
EXTERNAL
EXTERNAL
INTERNAL
INTERNAL
Output Type Switching
SINK
SOURCE
SINK
SOURCE
Pin No.
1, 2
PCOM
N.C.
PCOM
PCOM
3, 4
N.C.
MCOM
MCOM
MCOM
PLUG-IN Electronic GmbH • Am Sonnenlicht 5 • 82239 Alling • Tel.: [phone] • [email protected] • www.plug-in.de