Siemens SICAM A8000 Series User manual

DC8-012-2.06 Unrestricted
SICAM A8000 Series
SICAM I/O Modules
Manual
Preface
Table of Contents
Open Source Software
Introduction
1
Standard I/O Modules
2

Siemens AG Unrestricted Order no.: DC8-012-2.06
Energy Automation
Humboldtstraße 59
90459 Nürnberg
Germany
Note
Please observe Notes and Warnings for your own safety in the Preface.
Disclaimer of Liability
Although we have carefully checked the contents of this publication
for conformity with the hardware and software described, we cannot
guarantee complete conformity s
ince errors cannot be excluded.
The information provided in
this manual is checked at regular
intervals and any corrections that might become necessary are
included in the next releases. Any suggestions for improvement are
welcome.
Subject to change without prior notice.
Document Label:
SICRTUs-HBSICAMIOMODULE-ENG_V2.06
Issuing date:
2019-09-13
Copyright
Copyright © Siemens AG
2019
The reproduction, transmission or use of this document or its
contents is not permitt
ed without express written authority.
Offenders will be liable for damages. All rights, including rights
created by patent grant or registration of a utility model or design,
are reserved.

SICAM A8000 Series, SICAM I/O Modules Unrestricted 3
DC8-012-2.06, Edition 09.2019
Preface
This document is applicable to the following product(s):
•CP-8000
•CP-8021
•CP-8022
Purpose of this manual
This manual describes the characteristics and functions of all SICAM input/output modules.
It contains:
•Functional Overviews
•Technical Data
•Interface Descriptions
•External Circuit Elements
Target Group
The document you are reading right now is addressed to sales engineers and users who are
in charge of the following engineering tasks:
•Evaluation of the module specifications
•Evaluation of quotation criteria, such as technical specifications
•Conceptual activities, as for example design and configuration
•Electrical installation
•Technical system maintenance and service, module handling
Recommendations for Third-Party Products
Siemens does neither receive liability nor warranty for recommendations which are given or
implied by this manual. For the correct and intended use of the respective product the
associated technical descriptions must be paid attention to in any case.
References to Third-Party Web Sites
Siemens is not responsible for the contents of third-party websites mentioned in this
document, as well as the correctness of the publications and links. For all product information
the respective manufacturer is responsible.

Preface
4Unrestricted SICAM A8000 Series, SICAM I/O Modules
DC8-012-2.06, Edition 09.2019
Placement in the Information Landscape
Document Item number
Common Functions Peripheral Elementes according to IEC 60870-5-101/104 DC0-011-2
SICAM A8000 Series – CP-8000, CP-8021, CP-8022 Manual DC8-023-2
You find current product information on our website: www.siemens.com/sicam.
Further Support
For more information, please contact our Customer Support Center:
Phone: [phone]
Fax: [phone]
(charges depending on provider)
e-mail: [e-mail]
The Siemens Power Academy offers a comprehensive program of professional training events
in the fields of power generation, distribution and transmission.
Main training centers are:
Nuremberg, Germany (Head Office)
Phone: [phone]
Fax: [phone]
[e-mail]
Vienna, Austria
Phone: [phone]
Fax: [phone]
[e-mail]
Schenectady, NY, USA
Phone: [phone]
Fax: [phone]
[e-mail]
Hebburn, United Kingdom
Phone: [phone]
Fax: [phone]
[e-mail]

Preface
SICAM A8000 Series, SICAM I/O Modules Unrestricted 5
DC8-012-2.06, Edition 09.2019
Notes on Safety
This manual does not constitute a complete catalog of all safety measures required for
operating the equipment (module, device) in question because special operating conditions
might require additional measures. However, it does contain notes that must be adhered to for
your own personal safety and to avoid damage to property. These notes are highlighted with a
warning triangle and different keywords indicating different degrees of danger.
Danger
means that death, serious bodily injury or considerable property damage
will occur, if the appropriate
precautionary measures are not carried out.
Warning
means that death, serious bodily injury or considerable property damage
can occur, if the appropriate
precautionary measures are not carried out.
Caution
means that minor bodily injury or property damage could occur, if the appropriate precautionary measures
are not carried out.
Note
is important information about the product, the
handling of the product or the respective part of the
documentation, to which special attention is to be given.

Preface
6Unrestricted SICAM A8000 Series, SICAM I/O Modules
DC8-012-2.06, Edition 09.2019
Qualified Electrical Engineering Personnel
Qualified electrical engineering personnel may commission and operate the device described
in this document. Qualified electrical engineering personnel in the sense of this document are
people who can demonstrate up to date technical qualifications as electrical technicians
including safety and first aid training. These person may commission, isolate, ground and
label devices, systems and circuits according to the standards of safety engineering.
Use as Prescribed
The device may only be used for such applications as set out in the catalogs and the technical
description, and only in combination with third-party equipment recommended and approved
by Siemens.
Correct and safe operation of the product requires adequate transportation, storage,
installation and mounting in a control cabinet, as well as appropriate use and maintenance.
During operation of electrical equipment, it is unavoidable that certain parts of this equipment
will carry dangerous voltages. Severe injury or damage to property can occur if the
appropriate measures are not taken:
•Before making any connections, ground the equipment at the grounding terminal.
•Hazardous voltages can be present on all switching components connected to the power
supply.
•The device does not represent a safety-oriented application; it does not provide fault
protection. Any fault protection must be provided by protection relays or other suitable
means.
•Even after the supply voltage has been disconnected, hazardous voltages can still be
present in the equipment (capacitor storage).
•LED display does not ensure that the connectors are free of voltage.
•Equipment with current transformer circuits must not be operated while open.
•The limit values indicated in the manual must not be exceeded; that also applies to testing
and commissioning.
Danger
Consider obligatory the safety rules for the accomplishment of works at electrical plants:
1. Switch off electricity all
-pole and on all sides!
2. Ensure that electricity cannot be switched on again!
3. Double check that no
electrical current is flowing!
4. Discharge, ground, short circuit!
5. Cover or otherwise isolate components
that are still electrically active!

Preface
SICAM A8000 Series, SICAM I/O Modules Unrestricted 7
DC8-012-2.06, Edition 09.2019
Statement of Conformity
The product described conforms to the regulations of the following European Directives:
•
2014/30/EU
Directive of the European Parliament and of the Council of 26 February 2014 on the harmonization
of the laws of the Member States relating to electromagnetic compatibility; Official Journal of the EU
L96, 29/03/2014, p. 79–106
•
2014/35/EU
Directive of the European Parliament and of the Council of 26 February 2014 on the harmonization
of the laws of the Member States relating to the making available on the market of electrical
equipment designed for use within certain voltage
limits; Official Journal of the EU L96, 29/03/2014,
p. 357–374
•
2011/65/EU
Directive of the European Parliament and of the Council of 8 June 2011 on the restriction of the use
of certain hazardous substances in electrical and electronic equipment; Official Journal of the EU
L174, 01/07/2011, p. 88-110
The conformity of the product with the above mentioned regulations is proven through the observance
of the following harmonized standards:
•
EN 60870-2-1:1996 for 2014/30/EU
•
EN 61010-1:2010 and EN 61010-2-201:2013 for 2014/35/EU; EN 61010-2-030:2010 (only AI-8510,
AI-8511, CM-8820)
•
EN 50581:2012 for 2011/65/EU
This declaration certifies the conformity with the specified directives, but is not an assurance of
characteristics in the sense of the product liability law.
The product is intended exclusively for use in an industrial environment.
Other Standards
UL 61010
-2-201 including UL 61010-1; UL 61010-2-030
CAN/CSA
-C22.2 No.61010-1, CAN/CSA-C22.2 No.61010-2-030 and
CAN/CSA
-C22.2 No.61010-2-201
The technical data of the product is approved in accordance with UL.
For more information
about the UL database, see: www.ul.com.
Select
Online Certifications Directory and enter E496940 as UL File Number.
IND. CONT. EQ.
E496940

Preface
8Unrestricted SICAM A8000 Series, SICAM I/O Modules
DC8-012-2.06, Edition 09.2019
Symbols used on the I/O Modules
Symbol
Description
Warning, risk of electric shock
Caution, risk of danger. The documentation
must be observed.
WEEE marking
Protection class II / protective insulation
Protection class III / extra-low voltage
CE conformity
UL conformity
Symbols used in Connection Diagrams
Symbol Description Symbol Description
Functional earth (FE)
Protective earth (PE)

SICAM A8000 Series, SICAM I/O Modules Unrestricted 9
DC8-012-2.06, Edition 09.2019
Open Source Software
This product contains, among other things, Open Source Software developed by third parties.
The Open Source Software used in this product and the license agreements concerning this
software can be found in the Readme_OSS. These Open Source Software files are protected
by copyright.
Your compliance with those license conditions will entitle you to use the Open Source
Software as foreseen in the relevant license. In the event of conflicts between Siemens
license conditions and the Open Source Software license conditions, the Open Source
Software conditions shall prevail with respect to the Open Source Software portions of the
software. The Open Source Software is licensed royalty-free.
Insofar as the applicable Open Source Software License Conditions provide for it you can
order the source code of the Open Source Software from your Siemens sales contact -
against payment of the shipping and handling charges - for a period of at least 3 years since
purchase of the Product.
We are liable for this product including the Open Source Software contained in it pursuant to
the license conditions applicable to the Product. Any liability for the Open Source Software
beyond the program flow intended for this product is explicitly excluded. Furthermore any
liability for defects resulting from modifications to the Open Source Software by you or third
parties is excluded. We do not provide any technical support for this Product if it has been
modified.

Open Source Software
10 Unrestricted SICAM A8000 Series, SICAM I/O Modules
DC8-012-2.06, Edition 09.2019

SICAM A8000 Series, SICAM I/O Modules Unrestricted 11
DC8-012-2.06, Edition 09.2019
Table of Contents
1Introduction......................................................................................................................15
1.1 Overview.............................................................................................................16
1.1.1 Application.....................................................................................................16
1.1.2 I/O Modules...................................................................................................16
1.1.2.1 Accessories..............................................................................................16
1.2 Mechanical Design .............................................................................................17
1.2.1 System SICAM A8000 CP-8000 ...................................................................17
1.2.2 System SICAM A8000 CP-802x....................................................................17
1.2.3 I/O Modules Dimensions ...............................................................................18
1.2.4 Labeling.........................................................................................................18
1.2.4.1 Screw Terminal Types..............................................................................18
1.3 Commissioning...................................................................................................19
1.3.1 Mounting........................................................................................................19
1.3.2 Electrical Connection.....................................................................................19
1.4 Climatic Ambient Conditions...............................................................................20
2Standard I/O Modules......................................................................................................21
2.1 DI-8110...............................................................................................................22
2.1.1 Features ........................................................................................................22
2.1.2 View...............................................................................................................22
2.1.3 Technical Data...............................................................................................23
2.1.4 Pin Assignment and Display..........................................................................24
2.1.5 Block Diagram and External Circuitry............................................................25
2.2 DI-8111...............................................................................................................26
2.2.1 Features ........................................................................................................26
2.2.2 View...............................................................................................................26
2.2.3 Technical Data...............................................................................................27
2.2.4 Pin Assignment and Display..........................................................................28
2.2.5 Block Diagram and External Circuitry............................................................29
2.3 DI-8112...............................................................................................................30
2.3.1 Features ........................................................................................................30
2.3.2 View...............................................................................................................30
2.3.3 Technical Data...............................................................................................31
2.3.4 Pin Assignment and Display..........................................................................32
2.3.5 Block Diagram and External Circuitry............................................................33
2.4 DI-8113...............................................................................................................34
2.4.1 Features ........................................................................................................34
2.4.2 View...............................................................................................................34
2.4.3 Technical Data...............................................................................................35
2.4.4 Pin Assignment and Display..........................................................................36
2.4.5 Block Diagram and External Circuitry............................................................37
2.5 DO-8212.............................................................................................................38

Table of Contents
12 Unrestricted SICAM A8000 Series, SICAM I/O Modules
DC8-012-2.06, Edition 09.2019
2.5.1 Features........................................................................................................ 38
2.5.2 View.............................................................................................................. 38
2.5.3 Technical Data.............................................................................................. 39
2.5.4 Pin Assignment and Display......................................................................... 41
2.5.5 Block Diagram and External Circuitry........................................................... 42
2.6 AI-8310 .............................................................................................................. 45
2.6.1 Features........................................................................................................ 45
2.6.2 View.............................................................................................................. 45
2.6.3 Technical Data.............................................................................................. 46
2.6.4 Pin Assignment and Display......................................................................... 47
2.6.5 Block Diagram and External Circuitry........................................................... 48
2.7 AI-8320 .............................................................................................................. 49
2.7.1 Features........................................................................................................ 49
2.7.2 View.............................................................................................................. 49
2.7.3 Technical Data.............................................................................................. 50
2.7.4 Pin Assignment and Display......................................................................... 52
2.7.5 Block Diagram and External Circuitry........................................................... 53
2.8 AI-8510 .............................................................................................................. 54
2.8.1 Features........................................................................................................ 54
2.8.2 View.............................................................................................................. 54
2.8.3 Technical Data.............................................................................................. 55
2.8.3.1 Accuracy of the Measured Values........................................................... 56
2.8.3.2 Accuracy of the Measured Ground Current with Isolated/Resonant
Ground Connection ................................................................................. 56
2.8.4 Pin Assignment and Display......................................................................... 57
2.8.5 Block Diagram .............................................................................................. 58
2.8.6 External Circuitry .......................................................................................... 59
2.8.6.1 Short-Circuit Indicator.............................................................................. 59
2.8.6.2 Ground Fault Indicator............................................................................. 60
2.8.6.3 Fault Detector.......................................................................................... 60
2.8.6.3.1 3-Phase Voltage, 3-Phase Current 61
2.8.6.3.2 3-Phase Voltage, 2-Phase Current + Sensitive Ground Current 63
2.8.6.4 Medium Voltage/Low Voltage Measurement...........................................64
2.9 AI-8511 .............................................................................................................. 65
2.9.1 Features........................................................................................................ 65
2.9.2 View.............................................................................................................. 65
2.9.3 Technical Data.............................................................................................. 66
2.9.3.1 Accuracy of the Measured Values........................................................... 67
2.9.3.2 Accuracy of the Measured Ground Current with Isolated/Resonant
Ground Connection ................................................................................. 67
2.9.4 Pin Assignment and Display......................................................................... 68
2.9.5 Block Diagram .............................................................................................. 69
2.9.6 External Circuitry .......................................................................................... 70
2.9.6.1 Short-Circuit Indicator.............................................................................. 70
2.9.6.2 Ground Fault Indicator............................................................................. 71
2.9.6.3 Fault Detector.......................................................................................... 71

Table of Contents
SICAM A8000 Series, SICAM I/O Modules Unrestricted 13
DC8-012-2.06, Edition 09.2019
2.9.6.3.1 3-Phase Voltage, 3-Phase Current 72
2.9.6.3.2 3-Phase Voltage, 2-Phase Current + Sensitive Ground Current 72
2.10 CM-8820.............................................................................................................73
2.10.1 Features ........................................................................................................73
2.10.2 View...............................................................................................................73
2.10.3 Technical Data...............................................................................................74
2.10.3.1 Accuracy of the Measured Values ...........................................................75
2.10.4 Pin Assignment and Display..........................................................................76
2.10.5 Block Diagram ...............................................................................................77
2.10.6 External Circuitry...........................................................................................78
2.10.6.1.1 3-Phase Current 78
2.11 AO-8380 .............................................................................................................79
2.11.1 Features ........................................................................................................79
2.11.2 View...............................................................................................................79
2.11.3 Technical Data...............................................................................................80
2.11.4 Pin Assignment and Display..........................................................................81
2.11.5 Block Diagram and External Circuitry............................................................82

Table of Contents
14 Unrestricted SICAM A8000 Series, SICAM I/O Modules
DC8-012-2.06, Edition 09.2019

SICAM A8000 Series, SICAM I/O Modules Unrestricted 15
DC8-012-2.06, Edition 09.2019
1 Introduction
Contents
1.1 Overview.............................................................................................................16
1.2 Mechanical Design .............................................................................................17
1.3 Commissioning...................................................................................................19
1.4 Climatic Ambient Conditions...............................................................................20

Introduction
16 Unrestricted SICAM A8000 Series, SICAM I/O Modules
DC8-012-2.06, Edition 09.2019
1.1 Overview
1.1.1 Application
The SICAM I/O modules are used for external expansion of the SICAM A8000 Series with
additional in- and outputs.
The SICAM A8000 Series is suitable for electrical distribution substations, gas distribution
substations, hydropower plants, pipelines and railway power supplies.
The SICAM I/O modules are used in the peripheral element of the SICAM A8000 Series from
the SICAM RTUs system family.
Peripheral Element Designation
CP-8000/USIO81 Universal Signal Input / Output
CP-8021/USIO81 Universal Signal Input / Output
CP-8022/USIO81 Universal Signal Input / Output
1.1.2 I/O Modules
I/O Module Designation Article number
DI-8110 Binary Input 2x8, DC 24 V 6MF28110AA00
DI-8111 Binary Input 2x8, DC 48/60 V 6MF28111AA00
DI-8112 Binary Input 2x8, DC 110 V 6MF28112AA00
DI-8113 Binary Input 2x8, DC 220 V 6MF28113AA00
DO-8212 Binary Output Relays 8x DC 24 to 220 V/AC 230 V 6MF28212AA00
AI-8310 Analog Input 2x2 Pt100/Pt1000 6MF28310AA00
AI-8320 Analog Input 4x ±20 mA/±10 V 6MF28320AA00
AI-8510 Analog Input 3x U (240 V), 3x I (LoPo) 6MF28510AA00
AI-8511 Analog Input 3x U (LoPo), 3x I (LoPo) 6MF28511AA00
AO-8380 Analog Output 4x ±20 mA/±10 V 6MF28380AA00
1.1.2.1 Accessories
I/O Module Designation Article number
CM-8811 Coupling Module SICAM I/O Modules
(only for CP-8000) 6MF28811AA00
CM-8812 Bus Connector SICAM I/O 10 pcs. (spare part) C53207-A5812-D481
CM-8820 CT-Adapter 3x I 1 A_5 A/225 mV 6MF28820AA00

Introduction
SICAM A8000 Series, SICAM I/O Modules Unrestricted 17
DC8-012-2.06, Edition 09.2019
1.2 Mechanical Design
1.2.1 System SICAM A8000 CP-8000
A SICAM CP-8000 system can be expanded by means of the coupling module CM-8811 with
up to 6 external I/O modules. The modules are mounted on a TS35 rail (DIN rail).
1.2.2 System SICAM A8000 CP-802x
A SICAM CP-802xsystem can be expanded with up to 8 I/O modules. The modules are
mounted on a TS35 rail (DIN rail).
F4
F3F2F1
POK
RY
ER
ETH
LK1
PK1
RS-232
OH2
RS-485
OH3
ETH
LK4
PK4 SD
X4
CP-8000
max. 6 I/O modules
TS35 rail
Coupling module
CP-8021
max. 8 I/O modules
TS35 rail

Introduction
18 Unrestricted SICAM A8000 Series, SICAM I/O Modules
DC8-012-2.06, Edition 09.2019
1.2.3 I/O Modules Dimensions
1.2.4 Labeling
The following places on the SICAM I/O modules are reserved for labels:
•Area on the center left hand side at the housing front
Label with 2D code for scanning and readable serial number (upon delivery already stuck)
•Bevel at the housing front, bottom
Operational equipment indicator (free definable)
1.2.4.1 Screw Terminal Types
For the screw terminals 2 different types are provided (manufacturer PHOENIX or FCI, see
different imprinting laterally at the terminal).
PHOENIX FCI
116 mm
124 mm
122 mm 132 mm
18 mm
X4
X3
X2
X1
30 mm
1
2
3
4
X4
SICAMA8000 DO-8212
1
2
3
4
X3
1
2
3
4
X2
1
2
3
4
X1
RY

Introduction
SICAM A8000 Series, SICAM I/O Modules Unrestricted 19
DC8-012-2.06, Edition 09.2019
1.3 Commissioning
1.3.1 Mounting
Precondition for the mounting of the SICAM I/O Modules is, that the SICAM A8000 System
which should be expanded, is already mounted on the DIN rail. Then you can mount the bus
connector which is delivered with the SICAM I/O Module on the DIN rail and press it into the
connector of the Master Module (in case of CP-8000 in the connector of the coupling module).
Afterwards you can plug the SICAM I/O Module on the bus connector.
Warning
The removal and attachment of energized modules is not allowed.
For modules that operate with voltages >60 V, care must be taken that manipulation on the peripheral
connectors may only be carried out in a de
-energized state.
The display (LCD, LED) of the modules do not grant a guarantee that the peripheral connectors are de
-
energized.
Note
For details about the mounting refer to the
manual SICAM A8000 Series CP-8000, CP-8021, CP-8022.
Caution
Bus communication is system
-internal only. It is not allowed to modify the bus connector.
The devices must be powered by a SICAM A8000 power supply only. For USA and Canada: Use a UL
listed SICAM A8000 power supply.
1.3.2 Electrical Connection
Check the adherence of the specified limit values.
Connect the process-devices to the screw terminals. Cabinet-internal wiring is preferably
carried out with plastic-insulated cables according to DIN VDE 298 T4 2/89. Types: H05V-
K/H05V2-K (0.5…1 mm²) or H07V-K/H07V2-K (1.5…2.5 mm²). Use only copper wires.
Due to the power dissipation in the device there is a higher temperature on the terminals than
the device ambient temperature. This increase is maximum 15°C with full load. For this
reason, the isolation of the wires must withstand a higher temperature than the device
environment temperature.
Example:
Max. ambient
temperature Max. temperature on the terminal Appropriate wire type
55 °C 70 °C H05V-K, H07V-K
70 °C 85 °C H05V2-K, H07V2-K
Conductor size, ampacity and temperature rating per the National Electrical Code.
Note
The SICAM I/O modules are switched ON and OFF with the SICAM A8000 master module.

Introduction
20 Unrestricted SICAM A8000 Series, SICAM I/O Modules
DC8-012-2.06, Edition 09.2019
1.4 Climatic Ambient Conditions
Parameter Value Test standard Product standard Class
Minimum air temperature
(cold) -40°C/96 h IEC 60068-2-1 Ad IEC 60870-2-2
IEC 60654-1 C2/C3 C2/C3
Maximum air temperature
(dry heat) 70°C/96 h
1)
50°C/96 h 2)
10% rH
IEC 60068-2-2
Bd IEC 60870-2-2
IEC 60654-1 C3 C3
Maximum air temperature
for safe operation 3) 55°C 2) IEC 61010-1
Cyclic damp heat 25/40°C/120 h
95% rH IEC 60068-2-30
Temperature gradient ≤30°C/h IEC 60870-2-2
IEC 60654-1 C2 C2
Relative air humidity 5…95% IEC 60870-2-2
IEC 60654-1 C1 C1
Absolute air humidity ≤35 g/m3IEC 60870-2-2
IEC 60654-1 C2 C2
Air pressure 70…106 kPa
(up to 3000 m) IEC 60870-2-2
IEC 60654-1 C2 C2
Temperature with storage
and transport -30…+85°C
Pollution degree 2 IEC 61010-1
1) applies for horizontal mounting
2) applies for vertical mounting (I/O Modules, Remote I/O interface)
3) applies for vertical mounting in terms of personal and system safety