Continental Refrigerator DL1G-SS User manual

GRIDDLE STAND
REFRIGERATORS
REFRIGERATORS
Utilizing Environmentally Safe, CFC-free R-134a Refrigerant
Standard Features
• Stainless Steel Exterior and Interior
• Plasticized Fin Evaporator Coil
• Capillary Dial Thermometer
• Anti-Sweat Drawer Heaters
• Chrome-Plated Hardware
• Heavy-Duty Diecast Flow-line Handle
• Heavy Gauge, Reinforced Stainless Steel
Finished Work Top With Drip Guard, Marine Edge
• One Piece Magnetic Snap-In Drawer Gaskets
• Automatic, Energy Saving, Non-Electric
Condensate Disposal
• Non-CFC Polyurethane Foam Insulation
• Easy Glide, Self-Closing Heavy-Duty Drawers
• Adjustable 6" Stainless Steel Legs
• 10' Cord and Plug Attached
• Performance Tested Refrigeration System
Utilizing Environmentally Safe R-134a Refrigerant
Optional Features & Accessories
•Heavy-Duty Casters •Special Electrical
•Remote Models Requirements
•Stainless Steel Pans • Digital Thermometer
Refrigeration System
The self-contained refrigeration system is mounted
within a side mounted housing, concealed behind a
stainless steel louvered grille. Full length air grille
allows for even air circulation to condensing unit. A
“Performance Rated”, air-cooled, hermetically
sealed, capillary type refrigeration system is
installed in each model. Contained behind mullion
are a plasticized finned coil and air circulating fans.
Our unique air flow design allows the cabinet to be
enclosed on both sides or, to be mounted flush
against a wall. Our refrigeration system, fully
charged with R-134a refrigerant, is designed to
maintain 38°-40°F while operating with an unre-
stricted air supply in ambient temperature of 100°
Fahrenheit. All condensate water is directed to a
non-electric condensate vaporizer located in the
compressor compartment, thus, no plumbing is
required. A strict quality assurance team inspects all
materials and components to certify that each
model conforms to the most exacting standards. All
models are performance tested for a minimum of 16
hours prior to crating.
Cabinet Construction
All materials are of top quality, and are assembled
under rigid supervision conforming to strict quality
assurance requirements. Case is of all metal weld-
ed construction and is internally supported and
braced for rigid unit construction. Exterior cabinet
back and bottom are of heavy gauge galvanized
steel. Work top is constructed of heavy gauge pol-
ished stainless steel for durability.
Cabinet design eliminates overlapping panels with
raw edges. Interior corners are rounded with a 1/4"
radius for cleaning ease. All cabinet joints and
seams are vapor-tight sealed. Easily removable
anti-sweat drawer heaters, concealed by a non-
metallic, non-conductive, high impact thermal
breaker strip, eliminates condensation build-up on
case front.
Insulation
All cabinet walls, top, and bottom have high densi-
ty, Foamed-in-place, non-CFC polyurethane insula-
tion.
Drawer Construction
Drawer fronts and backs are constructed of heavy
gauge, polished stainless steel with heavy duty,
safety grip, chrome plated handles. All drawer
fronts are insulated with non-CFC polyurethane
foam insulation. Full extension, lift-out type draw-
er frames are of heavy gauge, welded stainless
steel mounted on heavy duty, easy glide, self clos-
ing drawer slides. Each drawer holds two 12" x 20"
x 4" deep pans (not furnished). Self adjusting, full
perimeter, magnetic snap-in gaskets guarantee
a positive seal.
DL2G-SS
DL1G-SS

DLG305
REFRIGERATORS
A Division of National Refrigeration & A/C Products, Inc.
539 Dunksferry Road Bensalem, PA 19020
[phone] Fax: [phone]
www.continentalrefrigerator.com
SPECIFICATIONS
DIMENSIONAL DATA
Net Capacity (cu. ft.) 6.0 6.0 12.0 12.0 18.0 18.0
Width, Overall (in.) 50
3
/ 4 37
5
/ 8 76
3
/ 8 63
1
/ 4 102 88
7
/ 8
Depth, Overall (incl. Hdls.) (in.) 35 35 35 35 35 35
Depth, Body Only (Less Door(s)(in.) 33
5
/ 8 33
5
/ 8 33
5
/ 8 33
5
/ 8 33
5
/ 8 33
5
/ 8
Height, Overall (incl. 6" Legs) (in.) 26 26 26 26 26 26
Drawers (Std.) 224466
12"x20" Pans (Not Furnished) 44881212
REFRIGERATION DATA
Condensing Unit Size (H.P.) 1/5 - 1/4 - 1/3 -
Capacity (BTU/HR)** 1725 1725 1940 1940 2560 2560
ELECTRICAL DATA
Cabinet Specifications 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1
Condensing Unit Specs. 115/60/1 - 115/60/1 - 115/60/1 -
Cabinet Amperes 1.6 1.6 1.6 1.6 1.3 1.3
Total Amperes 6.0 1.6 6.9 1.6 8.5 1.3
Power Supply Cord 10 Ft. Yes Yes Yes Yes Yes Yes
SHIPPING DATA
Height-crated (in.) 44 44 44 44 44 44
Width-crated (in.) 65 65 109 109 109 109
Depth-crated (in.) 41 41 41 41 41 41
Volume-crated (cu.ft.) 61 61 103 103 103 103
Weigh-crated (lbs.) 450 390 580 520 730 670
**Rating @ +25°F Evaporator, 90° Ambient
DL1G-SS
One Section DL2G-SS
Two Section DL3G-SS
Three Section
Self-Contained Remote Self-Contained Remote Self-Contained Remote
SIDE VIEW
26"
191/2"
3
2DL1G-SS FRONT VIEW
DL2G-SS FRONT VIEW DL3G-SS FRONT VIEW
281/2"
281/2"
35"
2