Continental Refrigerator DL27-12M User manual

SANDWICH UNIT
MIGHTY TOP
Standard Features
• Unique Air Flow Distribution allows Pan Product To
Maintain 33-41°F Being in Compliance With And
Certified Under The New ‘98 NSF Standard For
Preparation Units
• Modern, State-of-the-Art Styling Performance Rated
Refrigeration System Utilizing
Environmentally Safe R-134a Refrigerant
• Easily Serviceable Rear Mounted Compressor
• 2" Non-CFC Polyurethane Foam Insulation
• Spring Loaded, Self-Closing Door
• Magnetic Snap-in Gasket
• Adjustable 6" Legs
• Heavy Duty, Epoxy-coated Steel Shelves
• Interior Hanging Thermometer
• Mighty Tops-3 Rows of Pans
• 10" Deep Full Length Nylon Cutting Board
• Cabinet Construction Consisting of Stainless Steel
Exterior and Interior
• Non-Corrosive, Plasticized Fin Evaporator Coil
• Completely Enclosed, Vented and Removable
Case Back
• Automatic, Energy Saving, Non-electric Condensate
Disposal
• 1/6 Size Pans, 4" Deep
• 10 ft. Cord and Plug Attached
REFRIGERATION SYSTEM
The self-contained refrigeration system is rear mounted,
concealed behind a removable louvered cover. Full-
length front air grille allows for even air circulation to
condensing unit. A “Performance Rated”, air-cooled,
hermetically sealed, capillary type refrigeration system
is installed in each model. Plasticized finned coil and air
circulating fans are contained within an easily accessi-
ble rear mounted housing. Our unique airflow design
allows the cabinet to be enclosed on both sides or to be
mounted flush against a wall. Our refrigeration system,
fully charged with R-134a refrigerant, is designed to
maintain 38° - 40° Fahrenheit while operating with an
unrestricted air supply in an ambient temperature of
100° Fahrenheit. All condensate water is directed to a
non-electric condensate vaporizer located in the com-
pressor compartment, thus no plumbing is required. A
strict quality assurance team inspects all materials and
components to certify that each model conforms to the
most exacting standards. All models are performance
tested for a minimum of 16 hours prior to crating.
CABINET CONSTRUCTION
All materials are of top quality and are assembled
under rigid supervision conforming to strict quality
assurance requirements. Case is of all metal weld-
ed construction and is internally supported and
braced for rigid unit construction. Exterior cabinet
back and bottom are heavy gauge galvanized steel.
Worktop is constructed of heavy gauge polished
stainless steel for durability.
Cabinet design eliminates overlapping panels with
raw edges. Interior corners are rounded with a 1/4"
radius for cleaning ease. All cabinet joints and
seams are vapor-tight sealed. An easily removable
anti-sweat door heater, concealed by a non-metallic,
non-conductive, high impact thermal breaker strip,
eliminates condensation build-up on case front.
INSULATION
All cabinet walls, top, and bottom have high density,
foamed-in-place, non-CFC polyurethane insulation.
SHELVING
Shelves are designed for heavy-duty use with
.306" diameter frame and brace members and
.140" diameter fill wires spaced 3/4" apart.
Shelves are welded steel and epoxy-coated
for a durable, long, rust-free service life.
DOOR CONSTRUCTION
Door shells are constructed of heavy-gauge
stainless steel and are internally braced and
urethane-foam-insulated for rigidity. Door cor-
ners are of welded construction and polished.
Replaceable snap-in door gaskets are self
adjusting, heavy-duty, magnetic type. Door
handles and hinges are chrome-plated and
non-corrosive. Hinges are spring loaded,
heavy duty, self-closing.
REFRIGERATORS
Utilizing Environmentally Safe, CFC-free R-134a Refrigerant
Optional Features & Accessories
•Remote Models - R •Door Locks
•Electric Condensate •Single Overshelf
•Additional Shelves •Double Overshelf
•Pan Opening Sizes
DL72-30M
•DL27-12M
•DL48-12M
•DL48-18M
•DL60-12M
•DL60-18M
•DL60-24M
•DL72-18M
•DL72-27M
•DL72-30M
Models Available

REFRIGERATORS
DLM305
A Division of National Refrigeration & A/C Products, Inc.
539 Dunksferry Road Bensalem, PA 19020
[phone] Fax: [phone]
www.continentalrefrigerator.com
MODEL MODEL MODEL MODEL MODEL MODEL MODEL MODEL MODEL
CHARACTERISTICS DL27-12M DL48-12M DL48-18M DL60-12M DL60-18M DL60-24M DL72-18M DL72-27M DL72-30M
DIMENSIONAL DATA
Net Capacity (cu. ft.) 7.4 13.4 13.4 17.0 17.0 17.0 20.6 20.6 20.6
1/6 Size Pans (4" Deep) 12 12 18 12 18 24 18 27 30
Width, Overall (in.) 271/248 48 60 60 60 72 72 72
Depth, Overall (Incl. Hdls.) (in.) 34 34 34 34 34 34 34 34 34
Depth, Body only (Less Door(s) (in.) 271/2271/2271/2271/2271/2271/2271/2271/2271/2
Depth, Cutting Board 10 10 10 10 10 10 10 10 10
Height (Incl. 6" Legs) 43 43 43 43 43 43 43 43 43
Shelf Area (sq.ft.) 3.5 6.8 6.8 8.1 8.1 8.1 10.2 10.2 10.2
Shelves 1222 22333
Doors 1222 22333
Condensing Unit Size (H.P.) 1/51/51/51/41/41/41/41/41/4
Refrigerant R134a R134a R134a R134a R134a R134a R134a R134a R134a
Cabinets Electric 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1
Amps 6.2 7.1 7.1 8.2 8.2 8.2 9.0 9.0 9.0
Fans 2333 33444
Interior Depth (in.) 20 20 20 20 20 20 20 20 20
Interior Height (in.) 261/4261/4261/4261/4261/4261/4261/4261/4261/4
Interior Width (in.) 24 1/2 44 44 56 56 56 68 68 68
Shipping Weight (lbs.) 188 282 285 319 322 330 398 414 420
Shipping Height (in.) 431/4431/4431/4431/4431/4431/4431/4431/4431/4
Shipping Length (in.) 353/464 64 681/4681/4681/4801/4801/4801/4
Shipping Depth (in.) 46 46 46 46 46 46 46 46 46
SIDE VIEW DIMENSIONS
DL27-12M FRONT VIEW
DL27-12M TOP VIEW DL60-18M TOP VIEW
DL60-24M TOP VIEW
DL72-27M TOP VIEW
DL72-18M TOP VIEW
DL72-30M TOP VIEW
DL48-12M TOP VIEW
DL48-18M TOP VIEW
DL48-12M, 18M FRONT VIEW
DL60-12M TOP VIEW
DL72-18M, 27M,30M FRONT VIEW
DL60-12M, 18M,24M FRONT VIEW