Convoy 5000 Performance Series Quick start guide

Convoy Technologies 6409 Highview Drive | Fort Wayne, IN 46818 | Ph [phone]
Owner’s / Installaon Manual
5000 Performance Series
Dome Interior Camera
Mounng the Camera Warning: ensure all power remains o unl installaon is completed!
Maintenance
Specicaons
1) Select a posion to mount the camera that is free of obstrucons and moving parts and has a proper viewing angle of the de-
sired area in the vehicle.
2) Remove the camera dome from the camera by loosening the screws.
3) Use the camera’s bracket as a mounng template to drill mounng holes. Align the mounng bracket with pre-drilled holes
then secure bracket with appropriate screws.
4) Route camera cable along with exisng factory harness where available, avoiding moving parts.
5) Reinstall the camera dome on the bracket using the supplied screws, once view is adjusted into posion.
• Ensure Power is o before installaon to prevent CCD and monitor damage
• Ensure the system power is o before connecng or disconnecng of equipment
• Use a microber so, damp cloth to clean the camera lens.
Image Sensor: ⅓” Sony CCD (WDR)
Resoluon: 967 x 494
S/N Rao: ≥50dB
Lens: 2.8mm
Min Illuminaon: 0Lux (LED on)
IR LED: 15pcs
Night Vision Distance: 35
Environment: IP66
Horizontal Angle: 95°
Vercle Angle: 72°
Overview
Interior Dome Camera, designed for
Driver monitoring of interior of bus,
RV, and other in-vehicle/trailer ap-
plicaons. Camera is protected by
the dome, has 35 IR capability in
total darkness, along with a wide
viewing angle.
Specicaons Connued:
Case Material: ABS Plasc
DC Power: 12V
Current: <1A (DC12V), <10W
Operang Temperature: -30° ~ 70° C
TV System: NTSC
Dimensions: 120mm dia x 60mm H
Troubleshoong
Symptoms Soluons
Cloudy Image Clean Dirty Camera Lens, camera dome inside and out
No Power / Image Check Power Connecons
Unstable Image Check Mounng Hardware and Camera Connecon for ghtness

Convoy Technologies 6409 Highview Drive | Fort Wayne, IN 46818 | Ph [phone]
Subject to the provisions described below, this CT product is protected for 1 year against defects in material and workmanship.
Should a product fail to perform as described above within the warranted period, it will be repaired or replaced with the same or
funconally equivalent product by CT. CT Support will determine if there is a warrantable condion. If warrantable condion ex-
ists, a return authorizaon (RA) will be issued. The owner is responsible for any labor and installaon charges. The warranty does
not include any further obligaon whatsoever, including but not limited to actual installaon of the replacement unit on the cus-
tomer’s vehicle. This warranty does not apply if, in the judgement of CT, unit is damaged due to improper installaon, unauthor-
ized disassembly of the unit, or mishandling beyond normal use, or other acts or omissions not sanconed by the owners manual,
or the product fails due to damage from shipment, handling, storage, accident, abuse or misuse, or if it has been used or main-
tained in a manner not conforming to product manual instrucons, has been modied in any way. Repair by anyone other than CT
or an approved agent will void this warranty. The maximum liability of CT under this warranty is limited to the purchase price of the
product covered by the warranty. CT is not liable for any direct, consequenal, indirect or punive damages of any kind. All defec-
ve products should be returned to CT with shipping charges prepaid. CT will not accept collect shipments.
Warranty and Support Informaon