After Sales Suppor t
MODEL: SKYMG-21 PRODUCT CODE:707130
8
ASSEMBLY INSTRUCTIONS
WARNING
BEFORE ASSEMBLY OF ANY PARTS, TAKE OUT ALL PARTS FROM THE CARTON.
DO NOT ASSEMBLE IF SOME PARTS ARE DAMAGED OR MISSING.
· THE ASSEMBLY OF THIS APPLIANCE REQQUIRES AT LEAST 2 PEOPLE.
Tools Required for Assembly (Included): Wrench x 1
Step 1: Assemble the Cart
1. Remove all screws and washers from the leg connectors.
2. Flip the legs upside down for easy assembly.
3. Insert the connectors into the leg ends. Fix the joint with
4. Mount the castor onto the leg bottom and tighten the unite
with the wrench provided. Repeat the other castors.
5. Check cart balance and tighten all screws in place.
6. Set the brackets on the castors to keep the cart in position.
Note:
While assembling, leave screws loose to allow adjustment
before hand.
Step 2: Mount the Shelf brackets
1. Take all parts out of BBQ. Then lift and locate the BBQ
body carefully onto the cart, ensure the draft door at the
bottom is centered between 2 legs.
2. Remove the nuts and washers from the bolts welded on
the metal bottom band on the ceramic grill body.
3. Hang the side brackets on the bolts and ensure the
bracket’s slots are facing up.
4. Attached the washers and acorn nuts consecutively to
the brackets. Then tighten with wrench provided.
Note:
1. Side brackets are marked on the back with letters
indicating their position (e.g., LF = Left front bracket.
RB = Rear back bracket.)
2. The BBQ is heavy and requires 2 people for lifting and
maybe a third person for guiding into the cart!
