Q
U
I
C
K
G
U
I
D
E
-
H
O
W
T
O
P
A
I
R
T
H
E
Q
i
B
R
I
D
G
E
T
O
T
H
E
Q
i
C
o
n
t
r
o
l
l
e
r
.
1. Plug inyour Qi Ingenious Wi-Fibridge toapower point
2. Press and hold down the pair button on the bridge.
3. While holding the pair button, press the pair icon onthe Qi controller screen.
4. Once the pair LED flashes rapidly, you can release the pair button on the bridge.
5. Wait for theLEDs on the bridge to spin around, the LED with nolabel or icon stays on.
6. This means the bridge ispaired with Qi Controller successfully
7. After afew seconds all the home automation options will appear on the home screen
8. Now plug inyour bridge to the Wi-Fimodem using the LAN cable provided.
9. Connect the LAN cable to the ethernet port onthe bridge and LAN port onthe modem.
10. When the bridge is connected to the modem, the LED with the globe icon onthe bridge
shows blue and the ethernet port orange and green lights stay on.
DOUBLE CHECK THE CONNECTED BRIDGE INFORMATION
1. Insert system password ‘wamfud', press enter, then click on Wi-Fi bridge configuration
2. You will see system ID number, IP and MAC address
DOWNLOADING THE COOLBREEZE APP AND SETUP INSTRUCTIONS.
1. Please ensure Wi-Fiisenabled onyour device.
2. Go to your devices, APP store and search and Download the CoolBreeze App onto your
device.
3. Select Allow to find and connect todevices on your local network and choose whether to
allow Notifications.
4. Select Register Now.
5. You will beprompted to register your name andemail address.Once completed please
then select Create.
6. Please complete the Home Location information in FULL and select Next.
7. Your devices Serial Number should be displayed atthe top of screen.
8. You can choose aname for your device inthe space provided. Please select Next to
continue.
