DPtech LSW5602 Series User manual

DPtech LSW5602 Ethernet Switch Installation Manual
i
DPtech LSW5602 Ethernet Switch
Installation Manual

DPtech LSW5602 Ethernet Switch Installation Manual
ii
Hangzhou DPtech Technologies Co., Ltd. provides full- range technical support.
If you need any help, please contact Hangzhou DPtech Technologies Co., Ltd. and its sale agent, according to where
you purchase their products.
Hangzhou DPtech Technologies Co., Ltd.
Address: 6th floor, zhongcai mansion, 68 tonghelu, Binjiangqu, Hangzhoushi
Address code: 310051

DPtech LSW5602 Ethernet Switch Installation Manual
iii
Declaration
Copyright 2011
Hangzhou DPtech Technology Co., Ltd.
All rights reserved.
No Part ofthe manual can be extracted or copied by any company or individuals without written permission, and can
not be transmitted by any means.
Owing to product upgrading or other reasons, information in this manual is subject to change. Hangzhou DPtech
Technology Co., Ltd has the right to modify the content in this manual, as it is a user guides, Hangzhou DPtech
Technology Co., Ltd made every effort in the preparation of this document to ensure accuracy of the contents, but all
statements, information, and recommendations in this document do not constitute the warranty of any kind express
or implied.

DPtech LSW5602 Ethernet Switch Installation Manual
iv
Table of Contents
CHAPTER 1 PRODUCT INTRODUCTION........................................................................................1-2
1.1 PRODUCT OVERVIEW ........................................................................................................................1-2
1.2 PRODUCT MODEL AND SPECIFICATION.............................................................................................1-2
1.3 FRONT PANEL AND REAR PANEL OF THE SWITCH ............................................................................1-5
1.3.1PRODUCT APPEARANCE OF THE LSW5602-44GT4GC SWITCH..........................................................1-5
1.3.2PRODUCT APPEARANCE OF THE LSW5602-44GT4GC-PWR SWITCH ................................................1-8
1.3.3PRODUCT APPEARANCE OF THE LSW5602-16GT8GC SWITCH........................................................ 1-11
1.3.4PRODUCT APPEARANCE OF THE LSW5602-16GT8GC-PWR SWITCH .............................................. 1-14
1.3.5PRODUCT APPEARANCE OF THE LSW5602-16GP8GC SWITCH ........................................................ 1-17
1.4 PORT INTRODUCTION ...................................................................................................................... 1-19
1.4.1 CONSOLE PORT............................................................................................................................... 1-19
1.4.2 10/100/1000BASE-T ETHERNET ELECTRICAL INTERFACE ............................................................... 1-20
1.4.3 SFP INTERFACE .............................................................................................................................. 1-21
1.4.4 COMBO PORT ................................................................................................................................. 1-24
1.5 INSERT CARD MODULE.................................................................................................................... 1-25
1.5.1 INTERFACE BOARD （LSW-1XGES）........................................................................................... 1-25
1.5.2 INTERFACE BOARD（LSW-2XGES）............................................................................................. 1-27
1.5.3 INTERFACE BOARD（LSW-2GEP）............................................................................................... 1-29
1.5.4 INTERFACE BOARD（LSW- 2XCX4）........................................................................................... 1-31
1.6 PRODUCT ASSEMBLY....................................................................................................................... 1-33
1.6.1PROCESSOR AND STORAGE ............................................................................................................. 1-33
1.6.2 INTERFACES ................................................................................................................................... 1-34
CHAPTER 2 INSTALLATION PREPARATION................................................................................2-1
2.1 GENERAL SAFETY RECOMMENDATIONS ...........................................................................................2-1
2.2 EXAMINING THE INSTALLATION SITE ...............................................................................................2-1
2.2.1 TEMPERATURE AND HUMIDITY REQUIREMENT .................................................................................2-1
2.2.2 CLEANLINESS...................................................................................................................................2-2
2.2.3 ESD REQUIREMENT..........................................................................................................................2-3
2.2.4 ANTI-INTERFERENCE REQUIREMENT................................................................................................. 2-3
2.2.5 LIGHTNING PROTECTION ..................................................................................................................2-3
2.2.6 GROUNDING REQUIREMENT ............................................................................................................. 2-4
2.2.7 WIRING CABLE REQUIREMENT .........................................................................................................2-4
2.3 LASER SAFETY...................................................................................................................................2-4
2.4 PREPARING TOOLS ............................................................................................................................2-4

DPtech LSW5602 Ethernet Switch Installation Manual
v
CHAPTER 3 DEVICE INSTALLATION.............................................................................................3-1
3.1 INSTALLATION PREPARATION...........................................................................................................3-1
3.2 INSTALLATION PROCEDURE ..............................................................................................................3-2
3.3MOUNTING THE SWITCH TO A SPECIFIC SITE ...................................................................................3-4
3.3.1 MOUNTING SWITCH ON WORKBENCH...............................................................................................3-4
3.3.2 MOUNTING SWITCH IN A 19-INCH RACK........................................................................................... 3-5
3.4 CONNECTING GROUNDING WIRES ....................................................................................................3-6
3.5 CONNECTING INTERFACE CABLE......................................................................................................3-7
3.5.1 CONNECTING CONFIGURATION PORT CABLE ....................................................................................3-7
3.5.2 CONNECTING ETHERNET MANAGEMENT PORT .................................................................................3-8
3.5.3 CONNECTING SERVICE PORT ............................................................................................................3-8
3.6 CONNECTING POWER CABLE ............................................................................................................3-8
3.6.1 CONNECTING ALTERNATING POWER CABLE.....................................................................................3-8
3.6.2 CONNECTING REDUNDANCY POWER CABLE..................................................................................... 3-9
3.7 VERIFY THE INSTALLATION...............................................................................................................3-9
CHAPTER 4 STARTING UP THE SWITCH AND UPGRADING SOFTWARE..............................4-1
4.1 STARTING UP THE SWITCH AT THE INITIAL BOOT ............................................................................4-1
4.1.1 SETTING UP A CONFIGURATION ENVIRONMENT ................................................................................4-1
4.1.2 BOOTING THE SWITCH...................................................................................................................... 4-5
4.1.3 STARTING PROCEDURE.....................................................................................................................4-6
4.2 DEFAULT LOGIN METHOD FOR WEB ................................................................................................4-7
CHAPTER 5 MAINTENANCE AND TROUBLESHOOTING............................................................5-9
5.1 DEALING WITH POWER SYSTEM FAILURES.......................................................................................5-9
5.2 DEVICE TROUBLESHOOTING .............................................................................................................5-9
5.2.1 NO DISPLAY ON THE TERMINAL ........................................................................................................5-9
5.2.2 GARBLED CHARACTERS ON THE TERMINAL..................................................................................... 5-10

DPtech LSW5602 Ethernet Switch Installation Manual
i
List of Figures
Figure1-1 LSW5602-44GT4GC front panel ............................................................................................................... 1-6
Figure1-2 LSW5602-44GT4GC front panel LED ...................................................................................................... 1-8
Figure1-3 LSW5602-44GT4GC rear view.................................................................................................................. 1-8
Figure1-4 LSW5602-44GT4GC-PWR front view...................................................................................................... 1-9
Figure1-5 LSW5602-44GT4GC-PWR front panel LED.......................................................................................... 1-11
Figure1-6 LSW5602-44GT4GC-PWR rear view ..................................................................................................... 1-11
Figure1-7 LSW5602-16GT8GC front view .............................................................................................................. 1-12
Figure1-8 LSW5602-16GT8GC front panel LED .................................................................................................... 1-13
Figure1-9 LSW5602-16GT8GC rear view................................................................................................................ 1-14
Figure1-10 LSW5602-16GT8GC-PWR front view.................................................................................................. 1-14
Figure1-11 LSW5602-16GT8GC-PWR front panel LED........................................................................................ 1-16
Figure1-12 LSW5602-16GT8GC-PWR rear view ................................................................................................... 1-16
Figure1-13 LSW5602-16GP8GC front view ............................................................................................................ 1-17
Figure1-14 LSW5602-16GP8GC front panel LED .................................................................................................. 1-19
Figure1-15 LSW5602-16GP8GC rear view.............................................................................................................. 1-19
Figure1-16 RJ45 pinout diagram................................................................................................................................ 1-21
Figure1-17 Ethernet cable diagram............................................................................................................................ 1-21
Figure1-18 LC connector diagram ............................................................................................................................. 1-23
Figure1-19 SC connector diagram ............................................................................................................................. 1-23
Figure1-20 Optical module diagram .......................................................................................................................... 1-24
Figure1-21 Front View of the DPtech LSW-1XGES ............................................................................................... 1-25
Figure1-22 Front view of the DPtech LSW-2XGES switch .................................................................................... 1-27
Figure1-23 DPtech LSW-2XGES operation status indicator................................................................................... 1-28
Figure1-24 Front view of the DPtech LSW-2GEP switch ....................................................................................... 1-29
Figure1-25 DPtech LSW-2GEP operation status indicator light ............................................................................. 1-30
Figure1-26 Front view of the LSW- 2XCX4 switch................................................................................................. 1-32
Figure1-27 Ethernet interface..................................................................................................................................... 1-35
Figure3-1 Switch installation procedure...................................................................................................................... 3-4
Figure3-2 Mounting device on the workbench ........................................................................................................... 3-5
Figure3-3 Mounting ear................................................................................................................................................ 3-5
Figure3-4 Mounting the device to a rack (To see the image clearly, we only snapshot the device) ...................... 3-5
Figure3-5 Fasten the switch.......................................................................................................................................... 3-6
Figure3-6 Diagram for connecting grounding wire（take LSW5602-44GTGGCas example）............................ 3-6
Figure3-7 Connecting ground cable to the ground row.............................................................................................. 3-7
Figure3-8 Diagram for the power cord connection（take LSW5602-44GTGGC as example）............................ 3-9
Figure4-1 Network diagram for configuring the device initial boot through console port ...................................... 4-1
Figure4-2 Setting up a new connection ....................................................................................................................... 4-2
Figure4-3 Setting the connection port.......................................................................................................................... 4-2
Figure4-4 Setting communications parameters........................................................................................................... 4-3
Figure4-5 Hyper Terminal............................................................................................................................................ 4-4
Figure4-6 Settings tab................................................................................................................................................... 4-5

DPtech LSW5602 Ethernet Switch Installation Manual
ii
Figure4-7 Web management interface......................................................................................................................... 4-8

DPtech LSW5602 Ethernet Switch Installation Manual
Chapter1 Product Introduction
1-1
List of Tables
Table1-1 Console port properties 1-19
Table1-2 Gigabit Ethernet electrical interface properties 1-20
Table1-3 Attributes of the GbE optical interface 1-21
Table1-4 Relationship between two ports 1-24
Table1-5 10GE Ethernet optical interface attributes 1-26
Table1-6 GbE interface attributes 1-30
Table1-7 GbE interface attributes 1-32
Table2-1 Temperature/humidity requirement 2-2
Table2-2 Dust limit in the equipment room 2-2
Table2-3 Limit of harmful gases in the equipment room 2-2
Table4-1 Configure serial port properties 4-3

DPtech LSW5602 Ethernet Switch Installation Manual
Chapter1 Product Introduction
1-2
Chapter 1 Product Introduction
1.1 Product Overview
DPtech LSW5600 series switches are DPtech self-owned products aiming at enterprise network and
metropolitan area network of convergence layer or access layer’s devices, providing users with rich
service and routing features. Meanwhile, they also can be used to connect to data center’s server farm.
DPtech LSW3600 series switches provides line-speed Ethernet Layer 2 switching capacity with
10/100/1000M different accessing and process capacity enlarging the products application range.
1.2 Product Model and Specification
At present, the DPtech LSW5602 series commercial switches includes the followings:
LSW5602-44GT4GC
LSW5602-16GT8GC
LSW5602-16GP8GC
LSW5602-44GT4GC-PWR
LSW5602-16GT8GC-PWR
The specification of DPtech LSW5602 series is shown as following:
Item
LSW5602-44GT4GC
LSW5602-16GT8GC
LSW5602-16GP8GC
Dimension（W×D×H）
440mm*320mm*44mm
440mm*320mm*44mm
440mm*320mm*44mm
Weight
4.5Kg
4.5Kg
5.0Kg
Management port
1 console port, on the front panel
GE port on front panel
44 Ethernet electrical
interfaces (RJ45).
4 1000Base-X Ethernet
optical interfaces (SFP).
24 10/100/1000Base-T
Ethernet electrical
interfaces (RJ45).
8 Ethernet electrical
interfaces (RJ45).
24 1000Base-X Ethernet
optical interfaces (SFP).
8 Ethernet electrical
interfaces (RJ45).
Last four
10/100/1000Base-T
Ethernet ports and
Last eight 10/100/1000Base-T Ethernet ports
and the corresponding SFP pot form Combo
port.

DPtech LSW5602 Ethernet Switch Installation Manual
Chapter1 Product Introduction
1-3
Item
LSW5602-44GT4GC
LSW5602-16GT8GC
LSW5602-16GP8GC
the corresponding
SFP pot form
Combo port.
Note: only one port can be used when two Combo ports form at the
same time.
supporting interface module
supported
There are two interface module at rear panel, you can select:
Dual ports GE SFP interface module expansion card: LSW-2GEP.
Short distance dual ports 10GE CX4 interface module expansion card:
LSW-2XCX4.
Dual ports 10GE SFP+interface module expansion card:
LSW-2XGES.
Single port 10GE SFP+interface module expansion card:
LSW-1XGES.
Input voltage
Alternating
current
Rated voltage range: 100V～240V AC, 50/60H
RPS input
interface
Rated voltage range: 12V DC
None
Incoming current
Alternating
current
Rated current: 1.5A
Rated current: 1.5A
Rated current: 1.5A
Direct current
Rated current: 10A
Rated current: 10A
None
Power input interface type and
number
1 AC input interface
1 RPS input interface
1 AC input
interface
1 RPS input
interface
2 AC input interface
Maximum power
150W
Heat dissipation
Adopt 3 fans to dissipate heat.
Work environment temperature
0℃～45℃
Work environment relative
humidity(non-condensation ）
10%～95%