See Website for Full Safety Information
• Do not use in conned space.
• This unit requires 24V DC only 2.7A max.
• All Coomber equipment is covered by a 12 months warranty against
defective components or faulty manufacture from date of dispatch.
• Any modications to or misuse of the equipment renders this warranty void.
• Equipment that is security marked or damaged cannot,
under any circumstances, be exchanged.
• We reserve the right to change products and specications without notice.
Power connection
……………………………………………………
Product Instruction Manual
44500 Series
FEED a CD printed side up into the slot, the CD can be
CDA format or MP3.
EJECT - If pressed this will send the disc out.
SPEED - Turning left enables a slower play speed,
turning right allows a faster play speed. Normal speed is
achieved by turning the control until the centre dent/
notch is felt.
SOURCE - When the Source key is pressed you can
toggle between the CD, USB and SD CARD READER.
FOLDER-When in “stop “mode, select the folder to be
played by scrolling through <<back or >> next folder.
When in the “play” mode, you can skip the track being
played to the next or previous track that is in the folders
list by pressing << or >>.
CAUTION If no sound is heard;
Check the mute button on the CD, if playing from a CD/
USB/SD Card.
Turn up the master volume & input volume to the
desired level.
Input Mix Levels
……………………………………………………
Connect the1858 external power supply to the DC in.
Plug the 1858 to the mains supply.
Switch on power to the unit.
Press the on / o button.
The blue LED will be lit when powered .
Playing a CD/USB/SD Card
……………………………………………………
Connecting an iPod or External
audio device
Each input has its own volume level, as a starting point set
all to half volume then adjust each one to your desired
volume.
E.g. CD volume slightly lower than Microphone so that
your voice can be heard over the music.
Then use the master volume to adjust the overall volume
to suit the space and audience.
UHF 1 Models
Rechargeable Models
This unit contains rechargeable batteries
The LED lights up when the batteries are charging.
You can charge and use the unit at the same time, if the
DC power is unplugged the unit will continue playing.
Please fully charge the batteries before storage.
……………………………………………………
A wireless microphone receiver is built into this unit and
precongured ready for use.
The microphone is set on channel 1as a default.
To operate the microphone install a new battery then
adjust the microphone level and master volume on the
unit to mid point.
Switch on the microphone, adjust the volume to suit.
……………………………………………………
Using the supplied (Coomber part no 41243) 3.5mm jack
plug lead connect the headphone output of the external
device (iPod) to the stereo Aux in.
Use the external device to play and adjust the volume
after it is plugged in.
You can use your Coomber to adjust the volume.
Remote control & menu features will not control your
external device.