Cooper Notification Ametrix YR Series User manual

40
1. To secure yoke to outdoor surface, the fixture head must be
removed. First, remove both #10-32 x 5/ end screws.
2. Remove one #6-32 x 1/4 screw to remove yoke end cap and
fixture head. Place both fixture head and yoke end cap in a
safe place.
3. With fixture head and yoke end cap safely stored, secure
yoke to outdoor surface using four(4) appropriate 1/4"
fasteners (by others).
Mounting yoke to outdoor surface
#10-32 x 5/
End screw (x2)
Yoke end cap
Yoke end cap
1/4 Fasteners
(by others) (x4)
#6-32 x 1/4
screw(x2)
Aiming the fixture
1. To aim fixture, loosen both #10-32 x.625 end screws. When
the PointGrab TM system indicators are lined up, the slope
of the lens face is 40-degrees. Each subsequent notch is
an additional 10-degrees.
2. When the fixture head is adjusted to the desired angle, re-
tighten end screws to secure the position.
Fixture head
indicator
Yoke arm indicator
#10-32 x 5/
end screws
#6-32 x 5/
Socket cap screw
(x3)
#6-32 x 1/2
Socket cap screw
(x2)
1/2" Compression
fitting
1. To seal fixture head, after installing lamp, all screws and
latches must be secured on door face. Holes above latches
receive the #6-32 x 1/2 socket cap screws. The center hole(s)
receive the longer #6-32 x 5/ socket cap screw.
2. Slide 1/2" compression fitting down fixture head wire and
splice wit power feed, ensuring all connections are properly
matched. Seal 1/2" compression fitting to outdoor surface and
ensure a watertight seal.
#10-32 x1
End screw
Fixture head
#6-32 x 5/
Socket cap screw
(x3)
#6-32 x 1/2
Socket cap screw
(x2)
Yoke
Outdoor J-box
(by others)
1/2" Compression
fitting
Yoke end cap
1/4" Fasteners
(by others)
#6-32 x 1/4
Screw (x2)
Exploded view and part call-out
iring and sealing outdoor fixture
arning : Before starting any work ensure
that all sources of power are turned off. All
work must meet local/national codes and be
performed by a certified electrician.
Do not
mount fixtures vertically.
Installation Instructions
Vault C-Scroll Roundel
These installation instructions are valid with the above Ametrix styles.
1
3
2
Sheet 1 of 2
Large, OUTDOOR
YR (16.5")
(Yoke mount, Remote ballast)
Visor and Non-Visor
ADY071447 Rev A (ECN070295)
All manuals and user guides at all-guides.com
all-guides.com

"5 7
149.35
15.
"
5
715
16 "
201.49
Installation Instructions
Vault w/ visor C-Scroll w/ visor Roundel w/ visor
These installation instructions are valid with the above Ametrix styles
Mounting Plate Dimensions In [mm]
Lamping Size Chart
(lamps provided by others)
arning : Before starting any work ensure
that all sources of power are turned off. All
work must meet local/national codes and be
performed by a certified electrician. Do not
mount fixtures vertically.
Large, OUTDOOR
YR (16.5")
(Yoke mount, Remote ballast)
Visor and Non-Visor
Sheet 2 of 2
ADY071447 Rev A (ECN070295)
C
L
Mounting dimensions are for 16 1/2"(419.1mm) large YR indoor only
11 3
4"
29 .70
"1 4
1
31.7523.24
29 "
32
9
32 "
6.93
FIXTURE SIZE
(inches/ mm) WATTAGE # OF LAMPS LAMP TYPE LAMP DESCRIPTION
Lamp
(not to scale)
16
1/2
/ 419.1 32 W 1 T4 Compact Flourescent
16
1/2
/ 419.1 42 W 1 T4 Compact Flourescent
16
1/2
/ 419.1 57 W 1 T4 Compact Flourescent
16
1/2
/ 419.1 100 W 1 ED17 Ceramic Metal Halide
16
1/2
/ 419.1 150 W 1 T6 Ceramic Metal Halide
16
1/2
/ 419.1 175 W 1 ED17 Ceramic Metal Halide
All manuals and user guides at all-guides.com