Coopers 10651 User manual

Car Dash Cam 10651 Instructions for Use
Please read and retain these instructions for future reference v001: 03/11/16
Power Details: Input Voltage of camera: DC 5V, 1A
Input Voltage of car charger: DC 12-24 V
Output Voltage of car charger: DC 5V, 1A
Accessories: USB cable, Car charger, Bracket, User Manual
Please read this instruction manual thoroughly before starting and ensure you are familiar with
the operation of your new CAR DASH CAM
SAFETY INSTRUCTIONS:
WHEN USING ELECTRICAL APPLIANCES, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE
FOLLOWED:
READ ALL INSTRUCTIONS BEFORE USE.
UNPLUG FROM OUTLET WHEN NOT IN USE AND BEFORE CLEANING.
THE USE OF ANY ACCESSORY ATTACHMENTS NOT RECOMMENDED BY COOPERS OF
STORTFORD MAY CAUSE INJURIES AND INVALIDATE ANY WARRANTY YOU MAY HAVE.
DO NOT USE OUTDOORS.
DO NOT PLACE ON OR NEAR HEAT SOURCES.
USE WITH THE BRACKET PROVIDED AND MOUNT ON THE WINDSCREEN.
DO NOT COVER THE ITEM IN ANY WAY WHEN IN USE AS THIS MAY CAUSE OVERHEATING.
DO NOT USE THIS APPLIANCE FOR ANY OTHER USE THAN THE INTENDED USE IT IS DESIGNED
FOR.

Car Dash Cam
10651
Instrucons for Use
Please read and retain these instrucons for future reference v001: 03/11/16
BEFORE USE, CHECK THOROUGHLY FOR ANY DEFECTS AND DO NOT USE IF DEFECTS ARE•
FOUND. TAKE CARE NOT TO DROP THE APPLIANCE AS HEAVY IMPACTS MAY CAUSE
INTERNAL DAMAGE.
1. Product Structure
1. OK
2. Mode
3. SOS
4. Power
5. Reset
6. MIC
7. Lens
8. USB Slot
9. Bracket hole
10.Screen
11.Indicator
12.TF card slot
13.Up
14.Menu
15.
Down
2. Descripon of Funcon Keys
1) OK buon - In Video Mode, press the OK buon to start recording, press it again to stop. In
Photo Mode, press the OK buon to take a photo. In Menu interface, press the OK buon to
confirm your selecon.
2) Mode buon - Press the Mode buon to change camera mode between Record video / Take
photo / Play back.
3) SOS buon - When recording, press the SOS buon to lock the video file, which will not be
deleted by Loop recording funcon.
4) Power - Press and hold the Power buon 2-3 seconds to turn on/off, press Power buon to turn
on/off the night vision lights.
5)
Reset - Press to Reset.

Car Dash Cam
10651
Instrucons for Use
Please read and retain these instrucons for future reference v001: 03/11/16
6)
7) Lens - Camera lens.
8) USB slot - For connecng PC to transfer data or connecng Car charger for power supply.
9) Bracket Hole - For connecng bracket installaon.
10)Screen - 3.0 inch LCD screen.
11)Indicator - Blue indicator lights up when camera switches on; Red indicator lights up when
charging. Indicator light will turn offautomacally when fully charged; Blue indicator will be
flashing whilst recording video.
12)12) TF Slot - TF Memory Card Slot, it is suggested to choose card in Class 10 and above 8GB. (TF
card not included in standard package).
13)Up buon - In Menu interface, press the Up buon to select an opon. In Standby or Photo
mode, press the Up buon to zoom in.
14)Menu Buon - Press the Menu buon to access the menu interface, press it twice to select the
menu change.
15)Down Buon - In menu interface, press the Down buon to select an opon. In Standby or
Photo mode, press the Down buon to zoom out.
3. Special Funcon Descripon:
3.1 G-sensor
Measures acceleraon and lt.
In video recording mode, when sudden changes occur in lt or acceleraon, the current video file
will be locked automacally, it will not be deleted by Loop recording funcon.
3.2 SOS
In video recording mode, press the SOS buon to lock the file, which will not be deleted by Loop
recording funcon.
3.3 Automacally turn on/off
Aer the car charger is connected, the camera will automacally switch on when the car engine
starts. It will automacally switch off and save the video file aer the car engine is shut off.
3.4. Moon Detecon
Aer the car charger is connected, the camera will automacally switch on when the car engine
starts. Please turn Moon Detecon “ON” from the video mode menu.
Aer 5-12 seconds recording, Stand-by mode is turned on automacally, a yellow dot will be
flashing in the top le corner. If anything is moving in front of the camera, video will record
automacally.
MIC - Sound receiver.

Car Dash Cam 10651 Instructions for Use
Please read and retain these instructions for future reference v001: 03/11/16
4. Record video / Take photo operations
4.1 Power on/off
Press and hold the Power button 2 to 3 seconds to turn on the camera, the blue indicator lights up.
Press Power button again for 2 to 3 seconds to turns off the camera, the blue indicator switches off.
Note: When turning on the camera on a low battery, you will get a notification of LOW BATTERY
VOLTAGE, and the camera will turn off automatically.
4.2 REC mode
Press the Mode button to Video mode, the top left corner of the screen will show you a Recorder
icon, then press the OK button to start video recording, at the same time, a Red dot will flash on the
screen.
4.3 Photo mode
Press the Mode button to Photo mode, the top left corner of the screen will show you a camera icon,
then press the OK button to take one picture, at the same time the screen is flashing once.
In Photo menu, you could choose Capture time for each photo, Single/2s/5s/10s Timer as an option.
4.4 Video / Photo playback
Press the Mode button switch to Playback mode, the top left corner of the screen will show you a
Playback icon. Press the Up / Down button to select the file you want to display, and press OK to play
back the selected video.
4.5 Menu Setting
Press the Menu button to access the menu interface. Every mode has a different menu. For instance,
if you want to change the selection to Video, you should press the Mode button and switch to Video
mode, then press the Menu button.
Press the Up/Down button to select a specific option, press OK to confirm.
Press the Menu button again to exit the setting.
4.6 Time setting
Press the Menu button to enter for Set mode, press Menu button again to access the set up menu,
press the Up button to select the date and time options. Press the OK button to switch between Year
/ Month / Day / Hour, and press the Up/Down button to adjust the required value, press the OK
button to confirm the modification.
4.7 USB mode
Connect camera with a computer by USB cable, press the Power on button, it will show you a USB
menu, press the Up/Down to select the mode you want.
USB Disk: In this mode, you can access video files and photos.
5. Battery Instruction
5.1 Battery indication Image
Full Battery Slightly low battery Low battery Battery empty

Car Dash Cam 10651 Instructions for Use
Please read and retain these instructions for future reference v001: 03/11/16
5.2 Battery recharge
There are 3 methods to charge the battery, the red indicator lights up when charging, the charging
time is about 180 minutes, and the red indicator light switches off automatically when the battery is
fully charged.
Method 1: Using a power adapter for charging (DC Adapter is not included in the standard package)
Method 2: USB charging
Method 3: Using Car charger for charging
Note: Press the Reset button on the camera when the system is not responding.
6. Installing in Vehicles
6.1 Mount to Windshield
1) Attach the bracket to the device, slide it into the bracket holder until you hear a click.
2) Before installing the bracket, please use alcohol to clean the windscreen and suction cup of the
bracket. Wait until dry and press suction-cup on the windscreen.

Car Dash Cam 10651 Instructions for Use
Please read and retain these instructions for future reference v001: 03/11/16
3) Hold the base firmly on the windscreen and press down the clamp to mount the car holder to the
windscreen. Please ensure the base is securely locked in place.
6.2 Adjust the device position
1) Loosen the knob to swivel the device vertically or horizontally.
2) Tighten the knob to ensure the car dash cam is securely locked in place.
Clamp

Car Dash Cam 10651 Instructions for Use
Please read and retain these instructions for future reference v001: 03/11/16
7. Product Specification
Feature
Real HD 720P Car DVR
Video Resolution
1920*1080/1440*1080/1280*720/848*480/640*480/320*240
LCD Screen
3.0”(16:9)
Lens
120 degree wide lens angle
Video file format
AVI
Photo resolution
12M/10M/8M/5M/3M/2MHD/1.3M/VGA
Photo format
M-JPEG
G-sensor
Supported
Loop recording
Supported
Motion Detection
Supported
Automatically Power on / off
Supported
Time Stamp
Y/M/D/H
Built-in Memory
32MB
MIC
Supported
Night vision
Supported
Frequency
50HZ/60HZ
USB
USB 2.0
Power interface
5V 1A
Battery
Built-in 200mAh
Color
Black
Language
English, Russian, Chinese, Japanese, Korean, etc.
8. Trouble Shooting
For problems in normal operating situations, please try the methods below:
8.1 Cannot take photo and record
Check if the TF card has enough space or is locked.
8.2 Automatically stops when recording
Use a compatible high speed TF card with SDHC.
8.3 Unclear video
Check if there is any dust or fingerprints, and use lens wipes to clean the camera lens.
8.4 Black image when recording sky or water scene
Images with big contrasts will influence the automatic exposure function of the camera, you can
adjust EV in setting mode to correct.
8.5 Color is not perfect on cloudy day or with outdoor lighting
Set the White balance function to automatic.
8.6 System crash
Restart by pressing the Reset button after system crash.
WARNING
•CHECK THE APPLIANCE AND POWER CABLE CAREFULLY FOR DAMAGE BEFORE EACH USE.
•FOR ADULT USE.
•KEEP THE APPLIANCE AWAY FROM CHILDREN.

Car Dash Cam 10651 Instructions for Use
Please read and retain these instructions for future reference v001: 03/11/16
•DO NOT USE IF THE POWER CORD OR PLUG IS DAMAGED. TO BE REPAIRED BY A QUALIFIED
ELECTRICIAN OR TO BE REPLACED BY THE MANUFACTURER, SERVICE AGENT OR SIMILARLY
QUALIFIED PERSON, IN ORDER TO AVOID A HAZARD.
CARE AND CLEANING INSTRUCTIONS
Always switch off and unplug before cleaning.
Do NOT immerse in water. Risk of electric shock.
Do NOT use abrasive cleaners or sharp utensils to clean this appliance.
Wipe surfaces with a soft dry cloth.
Allow to dry thoroughly before further use.
Store the unit in a cool, dry place.
BATTERIES
•Keep batteries away from children and pets.
•Do not mix used and new batteries.
•Remove the batteries if left for long periods.
•Never dispose of batteries in a fire.
•Battery disposal, spent or expired batteries must be properly disposed of and recycled in
compliance with local regulations. For detailed information, contact your local authority.
•Follow the battery manufacturer’s safety, usage, and disposal instructions.
DISPOSAL
•Dispose of all packaging, paper, cartons and plastic, plastic bags in accordance with your
local recycling regulations.
•At the end of the product’s lifespan please dispose of it at an authorised household WEEE
waste recycling centre.