COP-USA CC25NVD?H User manual

CC25NVD‐H
User'sManual
ThesebuttonsarelocatedattheBackoftheCamera
PressthecenterButton toEntertheOSDMenu.
MoveUporDowntomovethruthemenuoptionsandleftorrightto
changevaluesonthemenu,
Pressthecenterbuttonagaintogetintosubmenus.
Alwaysremembertosavebeforeyouexit.
WhenyouHighlighttheReturnOption,presstherightbuttontoeitherexit,
saveandexitorjustreturn.

1.EXPOSURE
DEFAULTHLIAREA DEFAULTHBLCAREA
HBLC/D‐WDR:
OFF/BLC/HLI/D‐WDR
BLCMODE:(Backlight
Compensation)
Manual(BacklightCompensation
willbeineffectwheneverthe
d d l
AGC :(IncreasesBrightness,the
higherthesettingthemorenoise
willgetonthevideo)
OFFAGCdisabled
LOWLow AGCSetting
MIDDLEMiddleAGCSetting
HIGHHighAGCSetting
Lens:
DCIRIS(Usethisfeaturewhen
usingaDCLens)
GotoSubmenuandadjustthe
settings:
E.Shutter(1/60~1/100000)
Bright(001~100)
DCREF(000~20)
ELECTR.(usethisfeaturewhen
i
DC L)
HLI (HighLevelInterface)
HBLC(ItisHighlightBacklight
Compensation.Andwhatthiswilldoisintensify
theareaaroundthe
brightlighttohelpyouseetheobjectbetter.If
youleavethisoff,regular
HLIwilldoitsworkandwillonlyblackoutthe
brightlightsbutwillnot
d
rawnarea
d
etects
l
ow
illumination)
TOP(000~016)
BOTTOM(000~016)
LEFT(000~016)
RIGHT(000~016)
Auto(AdjuststheBacklight
Automatically)
BLCWEIGHT(Sensitivityto
Backlightcanbeadjustedor
disabled)
(OFF/LOW/MID/HIGH)
D‐WDR (WideDynamicRange)
ThisFunctionisusedto
compensatethestrongBacklight
Senseup:(Slowshutter Speed)
AUTO
OFF
X2~X512Manual Slowshutter
modeselectfromlowx2uptohigh
x512
us
i
nganon‐
DC

L
ens
)
E.Shutter(Auto,1/60,
1/100FLK,1/120~1/100000)
Bright(001~100)
3D‐DNR(OFF/LOW/MID/HIGH)
(ThisFeatureistoreducethe
Backgroundnoiseinalowlight
environment.)
togglethissettingatnighttime.If
younoticeaniceclearpictureat
nightwiththis
settingasbeingoff,thenplease
leaveitlikethat.However,ifyou
noticeagreatdealof
noiseyoucantogglebetweenthe
strengthsettingstoseewhatbest
suitsyour
scenario
intensifytheobjectsthataredirectlyaround
thebrightlight.Youcan
selecttheintensityoftheBLCaswellasthe
area.)
LEVEL:OFF/LOW/MID/HIGH
TOP:(000~030)
BOTTOM:(000~030)
LEFT:(000~030)
RIGHT:(000~030)
HLIMODE:(NIGHT/ALLDAY)
SETLEVEL:(001~100)
GRAYMODE:(SelecttheHLIareacolor:
GRAY/D.GRAY/BLACK)
MASKSEL:(MASK1/MASK2/MASK3/MASK4)
foreachmaskyouhaveanoptiontoadjustthe
sizeandlocation.thefeaturewilltakeeffect
onlyonselectedareas
MODE:(ON/OFF)
TOP:(000~030)
BOTTOM:(000~030)
LEFT:(000~030)

2.COLOR
WBMODE:
ATW(AutoTrackingWhiteBalance)
ItAutomaticallyadjuststhecolorbetween
1.800Kand10500K.
Usethisoptionifthelightingconditions
changesconstantly
MANUAL(Adjustthecolormanually)
AdjusttheREDandBLUEsettingswithvalues
rangingfrom0~255
M.WBR(000~128)
M.WBB(000~128)
AWC>PUSH
Adjustthewhitebalancebyfocusingatawhiteobjectorwhitesheetofpaperand
pressentertoadjustthecolor.
AWC(PresetWhiteBalance)
Usethisoptionwhenmanywhiteobjectsappearsonthesceneandalsowhenaobject
mergestothescenewithsimilarcolorshade
ToallthefeaturesthereisaR‐YandB‐Ycoloradjustment.
R‐YGAIN(000~255)Werecommendleavingatdefaultvalueof128
B‐YGAIN(000~255)Werecommendleavingatdefaultvalueof128

3.DAY&NIGHT
MODE:
AUTO(BURST/DAY>NIGHT/NIGHT>DAY/DWELL
TIME)
CameraswitchesfromColortoB/Wdependingon
theilluminationofthescene.
COLOR
StaysonDAYmodeandColor
B&W
StaysonNightmodeandB/W
BURST:
ON
Whenthisisselected,aCOLOR‐ B/Wpicturewillbe
shown.Thiswillincreasethenoise.
OFF
WhenthisisSelectedatrueB/Wpicturewillbe
shownonscreennohintsofcolor.
DAY/NIGHT(007~030)
This Optionsetsthebrightnesslevelwhichwill
determinewhentoswitchfromDAYtoNIGHTmode.
EXT: (Thisrequirestheuseofanexternalmechanismandcannot
beused
onthiscamera.)
BURST(ON/OFF)
ON
Whenthisisselected,aCOLOR‐ B/Wpicturewillbeshown.This
willincreasethenoise.
OFF
WhenthisisSelectedatrueB/Wpicturewillbeshownon
hi t f l
C‐SUP andA‐SUP:(000~100)Defaultis40.
Usethesesettingstoreducethecolororaperturesettings.
Forthisfunctiontowork,the3DDNRmustbeOFF.
TheHigherthenumber,thehigheristhesupression.
EXT.
CameraswitchesfromColortoB/Wdependingon
theilluminationofthescene.
NIGHT/DAY(006~029)
This Optionsetsthebrightnesslevelwhichwill
determinewhentoswitchfromNIGHTtoDAYmode.
DWELL TIME:(000~015)
This Functioncontrolstheswitchingtimebetween
DAYmodetoNIGHTmode,andFromNIGHTmodeto
DAYmode.
screenno
hi
n
t
so
f
co
l
or.
DAY/NIGHT(000~255)
This Optionsetsthebrightnesslevelwhichwilldeterminewhen
toswitchfromDAYtoNIGHTmode.
NIGHT/DAY(000~255)
This Optionsetsthebrightnesslevelwhichwilldeterminewhen
toswitchfromNIGHTtoDAYmode.
SMARTIR(AUTO/OFF)
Itautomaticallyadjusttheinfraredlightrequiredinasceneasthe
subjectmovesclosertoorfurtherawayfromthecamera,
resultinginaclearimagethatisnotwashedoutortoodark.
DWELL TIME:(000~015)
This FunctioncontrolstheswitchingtimebetweenDAYmodeto

4.FUNCTION
MIRROR
ON This Optionallowsyoutomirrortheimagehorizontally
OFFDisablesthefeature
SHARPNESS(0~30)
AdjusttheImageSharpnessdecreasingorIncreasingtheValues
LSC(LensShadingcompensation)whichcompensatesbrightnessof
fourlens’corners.SothattheLSCfunctionactivatestogetaclear
imageeffectively. IsrecommendedtoleaveitOFF.
ON‐ SETLEVEL(0~30)
5.MOTION
AREASEL:
Adjusteachsquaretocovermovementanywhereonthescreenarea.Thereare4area
selectionsthatyoucanchoosefrom.Youwillnoticethateachareawillbedisplayed
withapinkbox,theareawithinpinkboxiswherethemotionwillbeactivated.
MASKMODE(ON/OFF)
TOP(000~122)
BOTTOM(000~122)
LEFT(000~122)
RIGHT(000~122)
RETURN(000~122)
MOTIONDET.(ON/OFF)
ThisFunctionallowstoidentifytheareawherethemotionisdetected
AREA SELECT.1~4
Thisfunctionenablesupto4motionareas.
SENSITI.(001~30)
Thehigher
thesetting,themoremovementitwillcatch.
DISPLAY(OFF/ICON/TRACE)
IfsettoIcon,thisiconwillpop‐upwhendetectsmotion
IfsettoTrace,themaskingareawillbeshownonthescreeninaredtransparent
background.
HOLDTIME
Forexampleifyouhavethesettingat4,thecamerawillnot
signalmotionuntil4secondslateraslongasthatobjectisstillmovingwithinthe
selectedmaskarea.Ifyouwantinstantmotiondetectionnotification,thenplease
setthisat0.

6.PRIVACY
7.SETUP
MASK(1~8)
Thiscamerahasupto8maskingareas.These8MaskingAreascanbesetupanywhereinthescreen.
andeachmaskcanbeenabledordisabledanytime.
MODE(ON/OFF)
Title:(ON/OFF)
IfyouchoosetohaveaUserTitle,changethisoptiontoOn,thenselectit.
Thiswillallowyoutomanuallyinsertatitlebyselectingeachindividualcharacter.
Thissimplydisplaysthetitleofthecameratitleuponthescreen
ManualDPC(DeadPixelCompensation‐ OFF/MANUAL)
Thisfeaturetellsthecameratocompensateforanydeadpixelsbyfillingthatdeadpixelinwithanearbypixels
color.Normallythisshouldnoteverbeaproblemandyoucanleavethisoff,butifit
is,werecommendusingtheAutoMethodbelowasopposedtothismanualsetting.
WHITETHR(1~255)AdjustWhiteThreshold
BLACKTHR(1~255)AdjustBlackThreshold
DPCLEVEL(1~255)ControlstheDPClevels
AUTODPC‐(ThisFeaturefillsthedeadpixelsautomatically,butifthere'snodeadpixels,leaveitOFF)
DPCLEVEL(1~30)Selecttheintensityofthedeadpixelcorrection.
DPCRUNItAutomaticallycompensatesforthedeadpixels,tousethisfeature,coverthecamerawithhandsoranythingthatblockslightandpushtheenterto
runtheDPC.
OLPF(opticallowpassfilter)‐ Thisfeatureisusedifyouchoosetousedifferentfiltersoverthelens.Sincethislensisfixed,changingthisvaluewill havenoeffect
onthepicture.
Monitor(ChoosethemonitorTypeused)(CRTorLCD)
Gamma(0.20~1.00)
Gammaisanelectroniccorrectioncarriedoutbythecameracircuitrytobalancethebrightnessseenbythecameratothatof themonitor.Normally.45isthebest

8.SYSTEM
9.EXIT
CAMERAID:N/A
COMMUNI.:N/A
LANGUAGE:ENGLISH/CHINESE
EXIT
FACTORYSET:(YES/NO)
Thisfeaturerestoresthefactory
defaultsettings.
SAVE &EXIT:
SavestheChangesandExitthe
OSD.
EXIT:
EXIT:

Exitwithoutsavingyourchanges