Coppernic DS-ONE2-100 User manual

Single & Quad Docking Stations
Quick Start and Regulatory Guide
Les Fontaines de la Duranne
185 avenue Archimède 13857 Aix-en-Provence FRANCE
T. [phone] F. [phone]
coppernic.fr
SAS AU CAPITAL DE 100 000 EUROS • RCS : AIX 509 059 572
SIRET : 509 059 572 00016 • APE 6201Z • TVA : FR 58 509 059 572
QSG 190065 A00
DS-ONE2-100 & DS-ONE2-4000
- Non contractual picture -
- Non-contractual picture -

Single & Quad Docking Stations
Quick Start and Regulatory Guide
QSG 190065 A00
OUT OF THE BOX
Make sure that your shipping box contains these items:
DS-ONE2-1000
DS-ONE2-4000
Single Cradle x 1pcs
Quad Docking Cradle x 1pcs
Power supply x 1pcs
Power supply x 1pcs
DC to USB cable x 1pcs
Power cable x 1pcs
Ethernet cable x 1pcs
PRODUCT FEATURES
NOTE: DS-ONE2-4000 is with the same I/O as DS-ONE2-1000.

Single & Quad Docking Stations
Quick Start and Regulatory Guide
QSG 190065 A00
Getting started
CONNECT POWER
Use only the approved power supply (included in the package) which has been qualified with an
output rated at 5.35 VDC/2 A (DS-ONE2-1000) and 12 VDC/7.5 A (DS-ONE2-4000) The power
supply input rating is 100-240 VAC, 50/60 Hz.
> DS-ONE2-1000
Plug the power supply cable into the USB hole (DC JACK) on adaptor. Insert DC connector
into DC Jack on DS-ONE2-1000. Plug the supply into a standard wall outlet.
> DS-ONE2-4000
Plug the power supply on the back DC JACK of the DS-ONE2-4000.

Single & Quad Docking Stations
Quick Start and Regulatory Guide
QSG 190065 A00
NOTE:
Please find the docking function table as below for the operation.
* WARNING Unplug cable to resume charge.
- DC cable should be always plugged in for charging, Ethernet connecting, OTG function via
Micro USB, and ADB (Android Debug Bridge) files.
- Some functions may be disable while running the other one. For example, item 1, USB OTG and
ADB (slave mode) can’t work when using Ethernet (host mode).
CHARGE YOUR DEVICE
DATA CONNECTION
Use Ethernet cable plug to RJ45 jack for data connection through network.
DC-IN
ETHERNET
USB OTG
C-One = Mode HOST
ADB
C-One = Mode Slave
1
✓
CHARGING
✓
X
X
2
✓
CHARGING
X
X
✓
3
X
CHARGING
X
✓
*
X

Single & Quad Docking Stations
Quick Start and Regulatory Guide
QSG 190065 A00
REGULATORY INFORMATION
Europe
The CE marking indicates compliance to 2004/108/EC EMC Directive with Standards EN55022
CLASS B, EN55024, EN61000- 3-2, EN61000-4. 2011/65/EU ROHS (Recast). In addition, complies
to 2006/95/EC Low Voltage Directive, when shipped with recommended power supply.
Use only shielded data cables with this system. This unit has been tested with cables less than 3
meters. Cables greater than 3 meters may not meet class B performance.
Certified to CB Scheme IEC 60950-1, Second Edition.