Core Products CPC713 User manual

01
02
03
04
05
06
06
07
08
07
09
09
10
10
10
Core Products are proud to be a member of ACID (Anti Copying in Design).
Our designs are supported through their intellectual property databank.
All copyright, design rights & intellectual property rights existing in this product,
instructions and related documents are and will remain the property of Core Products.
We will treat any infringement of these rights seriously.
Copyright © Core Products 9/2020
CPC713

Ø8
25mm
Ax28
25mm
40mm
Ø4,5
Ø4,0
C
Bx18
x04
Fx10
Z
EG
x28
x12 x04
8x8
6mm
x04
Ø3,5
25mm
D
PARTS LIST
60min P3
P3 P3
P3
Xx01
RED = PAINT
The RED sachet contains touch up
paint for your furniture. Please
retain for use should you require it
at any point in the future. Application
is best with a small paint brush which
can be cleaned in water after use.
Keep out of reach from children, keep away from eyes, if
product gets into eye rinse thoroughly and repeatedly with
water. Do not digest, if swallowed seek medical advise
from doctor.
Warning!
GOLD GOLD
SILVER
Yx01
02
01
03
04
05
07 08
07
06
09
09
10
10
10
06
Thank you for choosing this furniture.
BEFORE YOU START ASSEMBLY please store the carton at room temperature for 48 hours or more so the
contents can acclimatise.
PLEASE RETAIN ALL PACKING UNTIL YOU HAVE COMPLETED ASSEMBLY.
Information about your Pine furniture.
Our pine furniture ranges have been carefully crafted from solid wood and wood fibre based composite boards. Each piece of pine has unique
characteristics such as knots, variances in shading and graining. These are part of the natural character of the furniture itself.
Caring for your Pine furniture.
Extreme temperature can cause slight movements in the wood itself so please avoid placing your furniture close to radiators or other
direct sources of heat. Humidity should also be avoided.
Please avoid exposing your furniture to continued bright sunlight as it can affect the colour.
Any fluid spills should be removed as quickly as possible.
Always lift your furniture when moving as dragging may cause damage to your furniture or flooring.
After care.
Wipe the surfaces with a dry cloth and an occasional use of a normal household furniture polish. For the models with drawers, we also recommend
you use household spray polish occasionally on drawer grooves and runners as this will aid use. Please do not use detergents or chemicals
on your furniture.
BEFORE YOU START ASSEMBLY
Please check that you have all the correct parts and fittings
as detailed on the assembly instructions.
FOR DAMAGED/REPLACEMENT PARTS
Please visit
www.coreproducts.co.uk/parts
Batch
Number
PLEASE RETAIN THIS LEAFLET ALONG WITH YOUR DELIVERY
NOTE/RECEIPT FOR FUTURE REFERENCE
2020-0000
2021 SPECIFICATION
© Core Products 11/2020
CPC713

2x2x
2x2x
02
03
0909
0606
A
F
E
E
F
F
F
F
F
F
F
F
F
F
F
E
E
E
E
E
E
E
E
E
E
A
A
A
A
A
A
A
A
A
A
A
AA
AA
AA
AA
AAAA
AAAA
Ø8
Ø8
Ø8
Ø8
Ø8
Ø8
25mm
25mm
25mm
25mm
25mm
25mm
A
A
A
A
A
A
x12
x08
x08
FF x10x10 EE x12x12
6mm6mm
01
02
03

04
05
!
04
02
03
05
C
C
C
C
C
C
C
C
C
C
C
25mm
Ø4,5
x10
P3
GOLD
09
09
06
02
03
C
C
C
C
C
C
C
D
D
D
D
25mm
Ø4,5
Cx08
P3
x04
Ø3,5
25mm
D
P3
GOLD SILVER
06

06
07
40mm
Ø4,0
Bx04
P3
Gx04
Zx04
8x8
GOLD
B
01
B
B
G
Z
G
Z
GZ
G
Z
30mm 30mm
90º
1
x22
2
07
08
07
Z
Z
1020mm
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
3
08
90º
Zx28
8x8

08
09
10
10
10
Xx01
RED = PAINT
The RED sachet contains touch up
paint for your furniture. Please
retain for use should you require it
at any point in the future. Application
is best with a small paint brush which
can be cleaned in water after use.
IMPORTANT NOTICE
In environments with children or uneven floors
which could cause your furniture to fall forwards
we recommend that this item of furniture is attached
to your wall using appropriate fixings (supplied).
WARNING: CHECK FOR HIDDEN PIPES AND CABLES BEFORE DRILLING.
IMPORTANT: IF YOUR WALLS ARE NOT SOLID LIKE BRICK OR STONE, YOU WILL REQUIRE SPECIALIST FITTINGS (NOT SUPPLIED).
- Place fixing strip against the wall and mark position for drilling hole.
- Drill hole in your wall to a depth of 30mm using a 6mm drill bit. If the surface of your wall is soft and crumbly, we would advise you
to use a 5mm drill bit for a tighter fit.
- Insert plug into hole with end flush to the wall surface.
- Attach fixing strip to the wall using the 25mm screw + washer and securely tighten.
- Pre-drill small pilot hole on the back edge of the furniture top using a 2mm drill bit. Attach the other end of fixing strip to the back
edge of the furniture top using the 14mm screw + washer and securely tighten.
-
Yx01
Y
Y
14mm14mm
25mm