Core Products VEGAS COFFEE TABLE VG902 User manual

38 min
PLEASE RETAIN THIS INSTRUCTION LEAFLET FOR FUTURE REFERENCE.
BATCH NUMBER
VEGAS COFFEE TABLE
REF. VG902
Height: 400 mm
Width: 1011 mm
Depth: 450 mm
Thank you for choosing this furniture.
BEFORE YOU START ASSEMBLY please store the carton for 48 hours or more so the contents can acclimatise.
PLEASE RETAIN ALL PACKING UNTIL YOU HAVE COMPLETED ASSEMBLY.
Information about your furniture.
This furniture range has been carefully crafted from melamine faced manufactured board.
Each piece is manufactured to the highest standards using specialised computer controlled machinery to ensure accuracy.
Caring for your furniture.
Extreme temperature can cause slight movements in the board material so please avoid placing your furniture close to radiators or other direct sources of heat.
Please avoid exposing your furniture to continued bright sunlight as this can affect the colour.
Any fluid spills should be removed as quickly as possible.
Always lift your furniture when moving as dragging may cause damage to your furniture or flooring.
Always use place mats, coasters or tablecloths to help protect against scratches and accidentally dropped items. Always use heat resistant mats when placing hot or
cold items on to surfaces.
Do not sit or stand on your furniture.
After care.
Wipe all surfaces with a dry cloth and the occasional use of a normal household furniture polish on wood surfaces and a household glass cleaner on glass surfaces.
Please do not use detergents or chemicals on your furniture.
After assembly remove all visible component identification stickers, these should remove easily however any remaining adhesive residue can be easily removed with
a label adhesive removal liquid available from most DIY or hardware stores.
BEFORE YOU START ASSEMBLY
Please check that you have all the correct
parts and fittings as detailed.
In the unlikely event that you require to
order spare parts or fittings please refer to
your delivery note for details of how to order
using our Parts website.
www.coreproducts.co.uk/parts
Customer help line 01738 630555
We recommend that you build your
furniture on top of a soft clean cover to
ensure the unit does not get marked or
damaged during assembly.

Page 2
A - x1
B - x2
C - x1
D - x2
E - x1
ASSEMBLY PARTS
ASSEMBLY HARDWARE
MAX SUGGESTED LOADS
A
B
B
C
D
D
E 25 Kg.
25 Kg.
x18
Wood Dowel Minifix Bolt
x16
Cover Caps
x10x16
Minifix Cams
Colour 1
x4
Steel Leg
Flat Head Screw
(14mm)
x16
Cover Caps
x10
Colour 2

Page 3
1
2
3
A
A
Rotate
Bx2
Repeat this in the
following steps.

Page 4
4
5
Dx2 Dx2
Rotate
E
6D
D
E
12
Turn minifix cams to
the right to tighten

Page 5
7
8
A
B
B
D
D
E
C
Rotate to tighten
Rotate

Page 6
9
A
B
B
D
D
E
C
After you finish the
adjustment of the cams,
cover them whit the
cover caps. AAfter you finish
assembling the cabinet,
take off the adhesive
letters.
Rotate to tighten