Core Products CR 800-Set User manual

CR 800-Set
90
Thank you for Choosing this furniture.
BEFORE YOU START ASSEMBLY please store the carton at room temperature for 48 hours or more so the contents can
acclimatize.
PLEASE RETAIN ALL PACKING UNTIL YOU HAVE COMPLETED ASSEMBLY.
Information about your furniture.
Our furniture ranges have been carefully crafted from solid wood and natural wood veneers. Each piece of timber has unique
characteristics such as knots, variances in shading and graining. These are part of the natural character of the furniture itself.
Caring for your furniture.
Extreme temperature can cause slight movements in the wood itself so please avoid placing your furniture close to radiators or
other
Direct sources of heat. Humidity should also be avoided.
Please avoid exposing your furniture to continued bright sunlight as it can affect the color.
Any fluid spills should be removed as quickly as possible.
Always lift your furniture when moving as dragging may cause damage to your furniture or flooring.
After care.
Wipe the surfaces with a dry cloth and an occasional use of a normal household furniture polish. We also recommend you use
household spray polish occasionally on the drawer grooves and runners as this will aid use. Please do not use detergents or
chemicals on your furniture.
BEFORE YOU START ASSEMBLY
Please check that you have all the correct parts and fittings as detailed in the Parts List above.
In the unlikely event of a part being missing please EMAIL : [e-mail]
requesting the part code or the alpha reference. Alternately highlight your requirement on
the above diagram.
Please provide the following information so that your request can be sent direct to you.
Name
Address
Post Code Telephone No:
Email address
BATCH NUMBER
Name & town of your retailer
For further advice you can telephone [phone] Core Products 5/11.
PARTS LIST
01
03
02
04
10
12
12
11
11
13
13
13
13
x12
A
x12
B
1/4 x 0mm8 1/4
x08
C
8 x 30
x24
D
4,0 x 35
x01
E
x04
7 x 50mm
x02
G
x08
7 x mm110
F
H
03
D
D
B
B
E+A
E+A
D
08
08
(2x)
G
G
E
D
B
A
Ø3,5 x 35 04
Ø1/4" x 80
04
04
1/4"
09
09
"Use a small drop of glue"
"Use a small drop of glue"
"Use a small drop of glue"
"Use a small drop of glue"
044/2017
Warning!: Keep out of reach from
children, Keep away from eyes, if
product gets into eye rinse thoroughly
and repeatedly with water. Do not
digest, if swallowed seek medical
advise from doctor.
08

10
D
D
D
DD
D
D
D
x2
11
12
13
A+E
A+E
G
A
E
E+A
A
E
G
13
13
E+A
E+A
E+A
* Carefully position the frame on the
underside of the table top (part 10) so
all side rails are 53mm from the edge
of the table.
53mm 53mm
53mm
53mm
05
04
DØ3,5 x 35 08
G
E
D
B
A
Ø3,5 x 35 04
Ø1/4" x 80
04
04
1/4"
* Place the seat base (part 1) on the
table or other flat surface and position
the built chair frame upside onto the
base, check the frame is positioned
centrally before fastening to the base.
(2x)
D
D
D
D
D
01
E+A
E+A
D
(2x)
G
D
D
B
B
04
07
06
08
7 x mm110
G
E
A 04
7 x mm110
"Use a small drop of glue"
"Use a small drop of glue"
"Use a small
drop of glue”
DØ3,5 x 35 08