Core Products TV 112-OKW User manual

UNDERSTANDING THE CODES
STAMPED IN THE PARTS:
00000 00
000
Piece number
Lot number
Product code
1
1
1
1
1
1
2
1
1
2
2
1
2
1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Thank you for choosing this furniture.
BEFORE YOU START ASSEMBLY please store the carton at room temperature for 48 hours or more so the contents can
acclimatise.
PLEASE RETAIN ALL PACKING UNTIL YOU HAVE COMPLETED ASSEMBLY.
Information about your furniture.
This furniture has been manufactured from surface coated wood based manufactured boards.
Caring for your furniture.
Extreme temperature can cause slight movements in the board material so please avoid placing your furniture close to
radiators or other sources of heat.
Please avoid exposing your furniture to continued bright sunlight as this can affect the colour,
any fluid spills should be removed as quickly as possible
Always lift your furniture when moving as dragging may cause damage to your furniture or flooring.
Use mats or coasters to help protect against heat.
Do not stand on your furniture .
Aftercare.
Wipe all surfaces with a dry cloth and the occasional use of a normal household furniture Polish, do not use detergents or
chemicals on your furniture. After assembly remove any visible component identification stickers, these should remove
easily however any remaining adhesive residue can be removed with a label adhesive removal liquid available from most
DIY or hardware stores. For models with drawers we also recommend you use a household spray polish or curtain track
spray on the drawer runner tracks. Please do not use any wax based products, chemicals or detergents on this furniture.
Regularly check all fixings to ensure they are tight.
90min
TV 112 - OKW / TV 112 - OKG / TV 112 - W
BEFORE YOU START ASSEMBLY
please check that you have all the correct parts and fittings
as detailed on these instructions.
FOR DAMAGED, MISSING OR REPLACEMENT PARTS
Please visit
2021 specification
Batch number [ ]DJM7170
PLEASE RETAIN THIS INSTRUCTION LEAFLET, ALONG
WITH YOUR DELIVERY NOTE/RECEIPT FOR FUTURE REFERENCE.
www.coreproducts.co.uk/parts
BASE
LEFT SIDE
RIGTH SIDE
LEFT CENTRE PANEL
RIGHT CENTRE PANEL
TOP CENTRE PANEL
TOP LIFT SIDE
TOP CENTRE SUPP. PANEL
TOP
TOP FRAME
SHELF
SLIDING DOOR
SIDE BACK PANEL
CENTRE BACK PANEL
F F
G H
B
J N
C D E
P Q
O
K L
A
M
45mm 30mm
4x 20x
2x 8x 12x 5x 2x
40x
17x
76x
21x
1x
6x 12x 8x
1x 2x
40mm 62mm
12mm
32mm
10mm
Ø6 Ø6
Ø3,5 Ø7
Ø4
Ø6
Ø50
Ø10
Ø15
Ø15
Ø6
R S
1x
1x
50mm
25mm
Ø6 Ø4

TV 112 - OKW / TV 112 - OKG / TV 112 - W
To avoid damage to your furniture
during assembly please build on a
soft clean surface such as the
inside of the cardboard box

TV 112 - OKW / TV 112 - OKG / TV 112 - W

TV 112 - OKW / TV 112 - OKG / TV 112 - W
Q
Q
R
O
S
P
Q
O
P
R
S
2x
1x
1x
1x
1x
WARNING: check for hidden pipes and cables before drilling.
IMPORTANT: if your walls are not solid like brick or stone you will require specialist fittings
(not supplied).
Place fixing strip against the wall and mark position for drilling hole.
Drill hole in your wall to a depth of 30mm using a 6mm drill bit. If the surface of your wall is
soft we would advise you to use a 5mm drill bit for a tighter fit.
Insert plug into hole with end flush to the wall surface.
Attach fixing strip to the wall using the 25mm screw and washer provided, securely tighten.
Pre drill a small pilot hole onto the back edge of the furniture using a 2mm drill bit. Attach
the other end of the fixing strip to the back age of the furniture using the 14mm screw and
washer provided and securely tighten.
8
J
B
IMPORTANT NOTICE
Where there is a risk of your furniture to fall forwards, especially in environments with children or uneven floors.
We recommend that this item is aached to your wall using appropriate fings.