Core Products TX510 User manual

TX510
2x
01
02
03
04
04
04
04 05
06
06
07
07
13
12
09
10
11
08
Core Products are proud to be a member of ACID (Anti Copying in Design).
Our designs are supported through their intellectual property databank.
All copyright, design rights & intellectual property rights existing in this product,
instructions and related documents are and will remain the property of Core Products.
We will treat any infringement of these rights seriously.
Copyright © Core Products 11/2021

65min P3
PARTS LIST
28mm
35mm
25mm
Ø4,5
Ø4,5
Ø4,5
B
H
F
G
x20
x12
x06
x02
P3
P3
P3
P3
Ø8
25mm
Ax36
30mm
Ø3,5
Cx12
GOLD
GOLD
GOLD
GOLD
P3
Dx06
40mm
Ø4,0
GOLD
P3
Ex06
BLACK
Zx22
8 x 8
Yx01
2x
01
02
03
04
04
04
04 05
06
06
07
07
08
13
12
09
10
11
Thank you for choosing this furniture.
BEFORE YOU START ASSEMBLY please store the carton at room temperature for 48 hours or more so the
contents can acclimatise.
PLEASE RETAIN ALL PACKING UNTIL YOU HAVE COMPLETED ASSEMBLY.
Information about your Pine furniture.
Our pine furniture ranges have been carefully crafted from solid wood and wood fibre based composite boards. Each piece of pine has unique
characteristics such as knots, variances in shading and graining. These are part of the natural character of the furniture itself.
Caring for your Pine furniture.
Extreme temperature can cause slight movements in the wood itself so please avoid placing your furniture close to radiators or other
direct sources of heat. Humidity should also be avoided.
Please avoid exposing your furniture to continued bright sunlight as it can affect the colour.
Any fluid spills should be removed as quickly as possible.
Always lift your furniture when moving as dragging may cause damage to your furniture or flooring.
After care.
Wipe the surfaces with a dry cloth and an occasional use of a normal household furniture polish. For the models with drawers, we also recommend
you use household spray polish occasionally on drawer grooves and runners as this will aid use. Please do not use detergents or chemicals
on your furniture.
BEFORE YOU START ASSEMBLY
Please check that you have all the correct parts and fittings
as detailed on the assembly instructions.
FOR DAMAGED/REPLACEMENT PARTS
Please visit
www.coreproducts.co.uk/parts
Batch
Number
PLEASE RETAIN THIS LEAFLET ALONG WITH YOUR DELIVERY
NOTE/RECEIPT FOR FUTURE REFERENCE
2021-0315
© Core Products 11/2021
TX510

01
02
03
2x
2x
4x
11
10
04
02
03
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
E
E
E
E
E
E
A
A
Ø8
Ø8
Ø8
25mm
25mm
25mm
A
A
A
x08
x08
x12
Ex06
E

04
05
Build your furniture on a soft clean
cover to stop the components
getting marked during assembly.
F
F
F
01
03
02
F
25mm
Ø4,5
Fx06
P3 GOLD
05
05
D
D
D
D
D
D
Dx06
40mm
Ø4,0
GOLD
P3
01
06
B
B
B
B
B
B
BB
B
B
BB
04
04 04
04
28mm
Ø4,5
Bx12
P3 GOLD
90º
BACK
BACK
BACK
Ensure the drawer runner side with 2 holes for dowels
part 04 is facing towards the top of the panel.
TOP OF PANEL
04

07
08
Zx22
8 x 8
Z
Z
Z
Z
Z
ZZ
Z
Z
ZZ
Z
ZZZ
Z
Z
Z
Z
Z
Z
3
90º
08
07
07
07
07
1
2
2mm
2mm
!
H
H
H
H
H
H
H
10mm
7,5mm
7,5mm
10mm
H
H
H
H
H35mm
Ø4,5
x12
P3 GOLD
08
06
06 06 06
FRONT
A
A
A
A
A
09
04
Ø8
25mm
Ax04
FRONT

A
4x
A
A
A
IMPORTANT NOTICE
Please avoid opening all drawers simultaneously
as this could cause your furniture to fall forwards.
Where there is a risk of this occurring, especially in
environments with children or uneven floors we
recommend that this item of furniture is attached to
your wall using appropriate fixings (supplied).
09
09
12
Ø8
25mm
Ax04
10 11
11
10
09
B
B
B
B
28mm
Ø4,5
Bx08
P3 GOLD
2x 2x
13
12
C
C
G
C
C
C
C
P3
30mm
Ø3,5
Cx12
GOLD
P3
Gx02
BLACK
Fixing drawer safety stops
2.
3.
1; Insert drawers into frame
by approximately 50mm.
2; Push wooden dowels
in through the pre-drilled
holes close to the back
of the drawer sides until
they are level with the
inside edge of the
drawer sides.
3; Check the position of
the drawer stops are
correct by opening and
closing the drawers.

WARNING: CHECK FOR HIDDEN PIPES AND CABLES BEFORE DRILLING.
IMPORTANT: IF YOUR WALLS ARE NOT SOLID LIKE BRICK OR STONE, YOU WILL REQUIRE SPECIALIST FITTINGS (NOT SUPPLIED).
- Place fixing strip against the wall and mark position for drilling hole.
- Drill hole in your wall to a depth of 30mm using a 6mm drill bit. If the surface of your wall is soft and crumbly, we would advise you
to use a 5mm drill bit for a tighter fit.
- Insert plug into hole with end flush to the wall surface.
- Attach fixing strip to the wall using the 25mm screw + washer and securely tighten.
- Pre-drill small pilot hole on the back edge of the furniture top using a 2mm drill bit. Attach the other end of fixing strip to the back
edge of the furniture top using the 14mm screw + washer and securely tighten.
Y
Y
14mm14mm
25mm
Yx01
13