Core Products Corona CR932 Manual

30mm
Ø3,5
x16
Ø8
25mm
x36 28mm
Ø4,5
x30
x02 x08x02
101
113
103
112
102
107
107
115
116
104
106
105
114
60min P3
CR932
Thank you for choosing this furniture.
BEFORE YOU START ASSEMBLY please store the carton at room temperature for 48 hours or more so the
contents can acclimatise.
PLEASE RETAIN ALL PACKING UNTIL YOU HAVE COMPLETED ASSEMBLY.
Information about your Pine furniture.
Our pine furniture ranges have been carefully crafted from solid wood and natural wood veneers. Each piece of pine has unique
characteristics such as knots, variances in shading and graining. These are part of the natural character of the furniture itself.
Caring for your Pine furniture.
Extreme temperature can cause slight movements in the wood itself so please avoid placing your furniture close to radiators or other
direct sources of heat. Humidity should also be avoided.
Please avoid exposing your furniture to continued bright sunlight as it can affect the colour.
Any fluid spills should be removed as quickly as possible.
Always lift your furniture when moving as dragging may cause damage to your furniture or flooring.
After care.
Wipe the surfaces with a dry cloth and an occasional use of a normal household furniture polish. For the models with drawers, we also recommend
you use household spray polish occasionally on drawer grooves and runners as this will aid use. Please do not use detergents or chemicals
on your furniture.
PLEASE RETAIN THIS INSTRUCTION LEAFLET FOR FUTURE REFERENCE.
BEFORE YOU START ASSEMBLY
www.coreproducts.co.uk/parts
BATCH NUMBER
Please check that you have all the correct parts and fittings as detailed in the Parts List above.
In the unlikely event that you require to order spare parts please refer to your delivery note
for details of how to order on our Parts Website.
2018-6642
PARTS LIST
P3 P3 GOLD
GOLD
x01
x01
Keep out of reach from children, keep away from eyes, if
product gets into eye rinse thoroughly and repeatedly with
water. Do not digest, if swallowed seek medical advise
from doctor.
Warning!
1179
111
108
109
110
2x
3/16X3/8

01
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA AA
AA
AA
AA
A
A
AA
BB
BB
B
B
BB
BB
BB
BB
B
B
BB
BB
AA
AA
AA
AA
A
AAA AA
AA
AA
AA
AA
A
AAA AA
104
105
107
107
114
113
106
103
102
112 107
116
115
2x
AA
02
Ø8
25mm
x36
28mm
Ø4,5
x08
P3 GOLD
BB

04
03
102
106
105
103
104
104
BB
BB
BB
BB
BB
28mm
Ø4,5
x03
P3 GOLD
28mm
Ø4,5
x03
P3 GOLD
90º
105
BB
(+)
BB

05
06
112
115
101
113
BB
BB
BB
BB
B
BB
BB
BB
BBBB
BB
BB
BB
BB
BB
BB
28mm
28mm
Ø4,5
Ø4,5
x12
x04
P3
P3
GOLD
GOLD
180º
90º

07
08
FF
FF
FF
FF
FF
FF
FF
FF
mm03
mm03
x02
x02
x08
30mm
Ø3,5
x08
P3
GOLD
117
108
108
110
111
3/16X3/8
2X

09
14mm14mm
25mm
x01
WARNING: CHECK FOR HIDDEN PIPES AND CABLES BEFORE DRILLING.
IMPORTANT: IF YOUR WALLS ARE NOT SOLID LIKE BRICK OR STONE, YOU WILL REQUIRE SPECIALIST FITTINGS (NOT SUPPLIED).
- Place fixing strip against the wall and mark position for drilling hole.
- Drill hole in your wall to a depth of 30mm using a 6mm drill bit. If the surface of your wall is soft and crumbly, we would advise you
to use a 5mm drill bit for a tighter fit.
- Insert plug into hole with end flush to the wall surface.
- Attach fixing strip to the wall using the 25mm screw + washer and securely tighten.
- Pre-drill small pilot hole on the back edge of the furniture top using a 2mm drill bit. Attach the other end of fixing strip to the back
edge of the furniture top using the 14mm screw + washer and securely tighten.
-